-TX/RX Frequency Range:
2.4G WIFI:
2412MHz~2472MHz
2422MHz~2462MHz
5G WIFI:
U-NII-1: 5180 MHz to 5240 MHz
U-NII-2A: 5260 MHz to 5320 MHz
U-NII-2C: 5500 MHz to 5700 MHz
U-NII-3: 5745 MHz to 5825 MHz
-MAX Power：
2.4G WIFI: 16.86dBm;
5G WIFI:
U-NII-1: 16.56dBm
U-NII-2A: 14.37dBm
U-NII-2C: 16.82dBm
U-NII-3: 10.52dBm
This product is allowed to be used in all EU member states.
This device in compliance with the essential requirements and other
relevant provisions of Directive2014/53/EU.
5150-5350 MHz Indoor Use Only!
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation..
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed
and operated with minimum distance between 20cm the radiator and your body: Use only the
supplied antenna.
Rapsodo Pte Ltd
(Blk 20 Ayer Rajah Crescent, #08-05, Singapore 139964)
DECLARATION OF CONFORMITY
(Jan. 24, 2026)
I, hereby declare that the product
Product Name: Touch All In One PC
Hardware: V2.0
Model Number: SK-215BJGL-K
Software: V1.0
Satisfies all the technical regulations applicable to the product within the scope of Council Directives
2014/30/EU, 2014/53/EU and 2014/35/EU declare that the same application has not been lodged with
any other EU Notify Body:
1.
EN 55032:2015/A1:2020
2.
EN 55035:2017/A11:2020
3.
EN IEC 61000-3-2:2019/A2:2024
4.
EN 61000-3-3:2013/A2:2021/AC:2022-01
5.
ETSI EN 300 328 V2.2.2 (2019-07)
6.
ETSI EN 300 440 V2.2.1 (2018-07)
7.
ETSI EN 301 893 V2.2.1 (2024-11)
8.
ETSI EN 301 489-1 V2.2.3 (2019-11)
9.
ETSI EN 301 489-17 V3.3.1 (2024-09)
10.
EN 50665:2017
11.
EN IEC 62311:2020
12.
EN IEC 62368-1:2020+A11:2020
(Title(s) of regulations, standards, etc.)
All essential radio test suites have been carried out.
NOTIFIED BODY:
Name: DERYCOM CERTIFICATION SERVICES, INC.
Address: 1100 Falcon Avenue
Glencoe, Mn 55336
Identification Number: 3052
MANUFACTURER or AUTHORISED REPRESENTATIVE:
Name: Rapsodo Pte Ltd
Address: Blk 20 Ayer Rajah Crescent, #08-05, Singapore 139964
Accessories:
1.
N/A
2.
/
This declaration is issued under the sole responsibility of the manufacturer and, if applicable, his
authorized representative.
Sincerely,
(Signature)
Contact Name: Batuhan Okur
Title: Director
Email: [email protected]
Manufacturer Name: Rapsodo Pte Ltd
