User Manual
Vibration Plate
Waver
™
Move with power, support full-body strength, and feel your best.
Naturally Activate All of Your Muscles at Once
Joel and I are athletes who suffered from severe ACL injuries a few
months apart. We purchased multiple pieces of wellness equipment
for our in-home rehab but were left disappointed and frustrated by
wellness and recovery devices that made big promises but gave
no support, no well-thought-out plan to follow, and no results. And
that’s how Lifepro came about, and why the Vibration collection was
created—we’ve set out to change all of that. It’s why every piece of
equipment bearing our name not only undergoes rigorous scrutiny
to make sure it delivers on power and efcacy, but also comes with
built-in support from our ‘guiding angels’ and a built-in lifetime
warranty so that you’re never left hanging.
Welcome to Lifepro.
We’re in this together now.
Hello There!
03
CUSTOMER SUPPORT
If you have any questions about setting up the Waver, we’re here to help. Email us at
support@lifeprotness.com and an experienced customer support representative
will be happy to assist you.
03
What’s in the Box? What’s in the Box?
Control Panel
Non-Slip Surface
Non-Slip Suction-Cup
Feet (4)
Resistance Band
Rings (2)
Power Switch & Power
Jack
Lifepro Waver™ Vibration Plate
Resistance Bands (2)Mini Bands (4)
Power Cord
Remote Control
We want you to be a part of our Lifepro crew! Join our
Wellness Circle and connect with people around the
world who are on this journey with you.
YOUR FITNESS, YOUR WAY.
Scan Here to Join Our Wellness Circle!
0504
Scan Here
Use any of the QR codes in this manual for helpful
instructions, tutorials, and other resources curated
specically for you and your Waver.
Quick Start Guide
Scan the QR code to activate the lifetime warranty for
your Waver within 14 days of purchase.
Scan Here Activate Your Warranty
?
QUESTIONS?
We’re here to help! Email us at support@lifeprotness.com
1 | PREP
1. Read through all safety instructions before beginning your rst session.
2. Remove the back of the remote control and insert
two AAA batteries.
NOTE: Be sure to insert the batteries according to the polarity markings
inside the battery compartment.
2 | POWER
1. Insert the power cord rmly into the power cord jack on the front of the
machine.
NOTE: Press forcefully until you feel a click, which indicates that the cord
is securely connected. The power cord ts tightly so it will not loosen
during use.
2. Plug the power cord into a standard electrical outlet.
3 | START
1. Flip the Power switch on the front of the machine to the ON position.
2. The control panel will light up.
3. Press the Start/Stop button to begin the default 15-minute manual mode
workout.
4. For more detailed information, review the OPERATING INSTRUCTIONS
on pages12–15.
Intended Uses
This product is intended to be used:
• On a level oor with at least 6 feet of clearance on all sides
• With your legs and arms slightly bent
• By people in good health
Exercise Quick Start Guide
GETTING STARTED
It’s a good idea to start slow and
easy with your Waver as it can
take time to get used to how
vibration plates move and feel.
We recommend following the
workout guide shown in the
table—building from easy to more
intense over several weeks.
USING THE EXERCISE GUIDE
Hold the stretches and exercises
on pages 8–9 for the number of
seconds shown in the table. You
will build strength and stamina as
you increase the vibration speed
and the number of seconds you
hold each stretch or exercise.
STANDING POSITIONS
Where you stand on the Waver will impact how challenging the
vibrations are for your body. Stand with your feet close together for
an easy workout, or stand with your feet further apart for medium and
intense workouts.
Amplify Your Workouts With
Resistance Bands
Resistance bands have become the new go-to for sculpting a stronger,
leaner physique. Unlike the inconvenience of a full gym, resistance
bands are well-known for their ability to train all aspects of tness and
performance at any intensity. They add resistance to cardio workouts
and power to strength training sessions, allowing you to train both
simultaneously. The number of creative workout possibilities is endless.
INCLUDED WITH YOUR WAvER
• Lifepro Mini Bands: Each band has a different resistance strength,
which allows you to level-up your resistance training effortlessly.
• Lifepro Handled Resistance Bands: Attach them directly to the Waver
to increase the intensity of your workouts.
ATTACHING THE HANDLED
RESISTANCE BANDS
1. Locate the metal rings near the front of
the Waver on each side.
2. Insert the end of a resistance band
through one of the metal rings.
3. Thread the handle through the loop
and pull tight.
4. Repeat to attach the second resistance
band.
0706
WORKOUT
INTENSITY
SPEED
LEVEL
SECONDS
TO HOLD
Easy
1
15, 30, 45
16
15, 30, 45
33
15, 30, 45
Medium
34
60, 75, 90
50
60, 75, 90
66
60, 75, 90
Intense
67
105, 120, 135
83
105, 120, 135
99
105, 120, 135
Scan now to learn more about your Waver.
Scan Here
QUAD STRETCH REVERSE FLY
HAMSTRING STRETCH SPLIT SQUAT
STRAIGHT ARM PLANK GLUTE BRIDGE
S Q UAT ALTERNATE SHOULDER PRESS
GLUTE STRETCH SIDE LUNGE
NECK STRETCH DIP
Waver Exercise Guide
0908
Tips for Using the Waver
SAFETY TIPS
• Do not get on or off the Waver while it is in motion. Never jump on or
jump off the machine.
• Always use the remote control to adjust workout settings. Using
the control panel while the machine is in motion could result in an
accident or injury.
• Never perform other activities while using the machine as this could
result in accidents or injuries.
• Never attempt to turn around, and do not quickly lean back or change
position while the Waver is in motion.
• Always stand with your back straight, your knees slightly bent, and your
heels slightly lifted. If you feel vibrations in your eyes, vocal cords, or
other parts of your head, you are standing incorrectly and should shift
your position immediately.
• Always slightly bend your legs and arms. Do not use the
machine with straight legs or arms, as the vibrations
are directed to your bones and brain, which can be
dangerous for your health.
• Never place your head, face, eyes, throat, chest, spinal
cord, or reproductive organs directly on the vibration
plate.
• Do not stand only on one side of the Waver; always
evenly distribute your weight.
• Stop exercising immediately and contact your
physician if you feel tired, dizzy, or nauseous, or if you
experience pain, difculty breathing, or an abnormal
heart rate.
• Do not use for more than 20 minutes per day.
Prolonged or over-intense exercise can be damaging
to your health.
• Make sure your body is used to the vibrations before
you sit on the machine.
• Do not use after drinking alcohol or taking medication that could affect
your balance or make you sleepy.
• Do not use the machine while only wearing socks or slippers, as this
could cause you to slip.
SETUP TIPS
• Place the Waver on a level, non-slip oor, in an area with at least 6 feet
of clearance on all sides of the machine.
• Plug the power cord into an easily accessible wall outlet so you can
remove the power cord immediately if there is a problem.
• You may put an exercise mat under the machine to reduce noise and
protect carpet or ooring.
EXERCISE TIPS
• Beginners should stand on the machine with their feet close together.
Gradually increase the difculty by standing with your legs farther
apart.
• Start slow and easy, with 5- to 10-minute workouts. Gradually work up
to longer, more challenging workouts over several weeks.
• Always wear appropriate athletic clothing and shoes. Clothing should
be comfortable and allow you to move freely.
• Do not wear loose or baggy clothing, jewelry, belts, or other
accessories that could get caught and cause an accident or injury.
• Remove sharp objects and valuables, such as cell phones from your
hands and pockets before using the machine.
• Warm up before your workout and cool down afterward.
• Take sufcient breaks between exercises, and take plenty of time off
between workout sessions.
• Breathe evenly. Exhale during exertion; inhale after exertion.
• Perform all exercises with smooth, even movements.
• Place a towel or exercise mat on the machine if you will be sitting or
performing exercises with your hands or arms on the machine.
• Drink plenty of water before and after exercise.
• Do not use on a full stomach; wait at least 90 minutes after eating to
begin exercise.
10 11
1312
Operating Instructions
USING THE REMOTE CONTROL
1. Power Button: Press to turn the control panel on
and off.
2. Prg Mode Button: Press to select a preset
workout program (P0–P9) or manual mode (88)
to create a custom workout. See CHOOSING A
WORKOUT PROGRAM on pages13–15 for
more details.
3. Start/Stop Button: Press to begin the selected
preset program or manual mode workout. Press
again to stop the in progress workout.
4. Time Increase and Decrease Buttons: Press to set
the workout time when manual mode is selected,
from 1–15 minutes in 1 minute increments. The
default time is 15minutes.
5. Speed High and Low Buttons: Press to adjust
the vibration speed after a manual workout has
begun, from level 1–99.
NOTE: The time and speed cannot be adjusted for
preset programs.
CHOOSING A WORKOUT PROGRAM
You may choose from 10 preset workout programs or create a custom workout
in manual mode. To get the best results, alternate between the preset programs
and custom workouts created in manual mode to keep your body guessing. Your
body tends to adapt to a workout routine over time, so you want to change up your
workouts to keep improving your tness.
Starting a Preset Workout Program
In preset program mode, you can select from 10 preset programs, P0–P9. Each
preset program is 15 minutes long and varies the vibration speed throughout to
help keep you on your toes. See chart on page 15 for a minute by minute break
down of the preset programs.
Please read the operating instructions before using the Waver Vibration Plate. Keep
this manual for reference.
USING THE CONTROL PANEL
1. Power Button: Press to turn the control panel on and off.
2. Prg Mode Button: Press to select a preset workout program (P0–P9) or
manual mode (88) to create a custom workout. See CHOOSING A WORKOUT
PROGRAM on pages13–15 for more details.
3. Start Button: Press to start a selected preset program or manual mode workout.
4. Stop Button: Press to stop the current workout.
5. Speed Low and High Buttons: Press to adjust the vibration speed after a manual
workout has begun, from level 1–99.
6. Speed Display: Shows vibration speed for the current program or manual mode
workout.
7. Remote: Infrared receiver for the remote control.
8. Time/Pro Display: During set up, this will show the mode and programs. Once
your workout has started, it will show the workout time remaining.
9. Time Decrease and Increase Buttons: Press to set the workout time when
manual mode is selected, from 1–15 minutes in 1 minute increments.
NOTE: The time and speed cannot be adjusted for preset programs.
SPEED
STOPSTARTPRG MODEPOWER
TIME
TIME PRO
REMOTE
SPEED
9
1 2 3 4
8 7 6 5
POWER
PRG MODE START STOP
TIME
SPEED
1
2
4
3
5
Scan for more exciting content from Lifepro Fitness.
Scan Here
1514
Use the remote control to start a preset program workout:
1. Press the Power button to turn on the control panel. The Time Pro display
alternates between showing “15,” the default workout time, and “88,” manual
mode, which is the default program/mode.
2. Press the Program Mode button to toggle through the preset programs in
order: P0, P1, P2, P3, P4, P5, P6, P7, P8, P9. The selected program/mode shows
in the Time Pro display. See the chart below for information about the preset
programs.
3. Press the Start/Stop button to begin the selected program. The Time Pro
display will count down the workout time and the Speed display will show the
programed speed level.
4. The workout will stop automatically when the 15-minute preset program ends.
You may press the Start/Stop button on the remote at any time to stop the
workout.
5. Press the Power button to turn off the control panel, ip the power switch to
the OFF position, and unplug the Waver after each use.
NOTE: The time and speed cannot be adjusted for preset programs.
PRESET PROGRAM BENEFITS
Creating a Custom Workout
In manual mode, you can create a custom workout of 1 to 15 minutes. The vibration
speed by default is level 1 but may be adjusted at any time once the workout has
begun from level 1 to 99. The vibration speeds correspond to the following workout
intensity levels:
Use the remote control to create a custom workout in manual mode:
1. Press the Power button to turn on the control panel. The Time Pro display
alternates between showing “15,” the default workout time, and “88,” manual
mode, which is the default program/mode.
2. Press the Time Increase and Decrease buttons to adjust the workout time
from 1–15minutes, in 1 minute increments. The default time is 15minutes. The
selected time is shown on the Time Pro display.
Easy: Levels 1–33 Medium: Levels 34–66 Intense: Levels 67–99
LOW INTENSITY
(P0–P2)
MEDIUM INTENSITY
(P3–P6)
HIGH INTENSITY
(P7–P9)
Great for beginners.
• Detoxication
• Improved balance
• Improved posture
• Joint maintenance
• Improved posture
• Improved balance
Great for increased
intensity.
• Muscle growth
• Power accumulation
• HGH release
?
QUESTIONS?
We’re here to help! Email us at support@lifeprotness.com
PROGRAM SPEEDS
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
MINUTES
SPEED PROGRAM
LOW
0
1
2
4 8 10 12 17 20 24 20 17 6 12 17 20 24 20
2 4 6 8 10 13 15 12 9 8 8 10 13 15 12
8 14 8 14 8 20 8 14 8 14 14 8 20 8 14
12 23 29 38 49 6 68 76 48 29 38 49 56 68 76
9 13 16 21 24 35 67 50 38 30 21 24 35 67 50
MED
3
4
5
23 55 23 55 23 55 23 55 23 55 55 23 35 23 55
6
7
8
9
HIGH
11 11 25 25 38 38 48 48 25 25 25 38 38 48 48
30 30 50 50 70 70 40 40 60 60 50 70 70 40 40
55 40 55 40 50 77 80 65 65 99 40 50 77 80 65
40 85 75 65 25 96 78 60 65 80 65 25 96 78 60
17
Troubleshooting Guide
Quickly troubleshoot simple issues you might experience with your
Waver using the table below. Please contact a customer support
representative for additional assistance at support@lifeprotness.com or
(800) 563-6604. Please do not attempt to repair the device.
ISSUE POSSIBLE REASON HOW TO RESOLVE
Machine is not
working.
Machine is not
connected to power.
Connect the power cable to an
electrical outlet.
Power cable is not
securely plugged into the
power cord jack.
Remove the power cable and
reinsert it forcefully until you
hear a click indicating it is
securely connected.
Machine is not turned on.
Flip the Power switch on the
front of the machine to the ON
position. Then press the Power
button on the remote control.
Remote control is
not working.
Remote is too far
away from the infrared
receiver on the control
panel.
Point the remote directly at the
infrared receiver from no more
than 6 feet away.
Batteries are dead.
Replace dead batteries with
new AAA batteries.
Batteries are installed
incorrectly.
Check to see if the batteries are
installed in the correct direction.
Machine stopped
working suddenly.
The selected program or
manual mode workout
has ended.
Begin a new workout session.
Cannot turn off
machine using
the remote or
control panel.
The machine must be
powered off via the
Power switch.
Flip the Power switch on the
front of the machine to the OFF
position.
16
Cleaning and Storage
WARNING:
Always unplug the power cord and allow the machine to cool before
cleaning, moving, or storing.
• Use a slightly damp cloth to wipe away dirt or moisture.
WARNING: Do not allow water or other liquids to come into contact
with the machine. Do not immerse it in water or other liquids.
• Do not use harsh detergents or abrasive, solvent, or chemical cleaners.
• Store in a cool, dry, indoor location. Store in a well-ventilated area, free
of dust, and out of direct sunlight.
• When storing for a long time, remove the batteries from the remote
control, and cover the machine to keep out dust.
NOTICE
• This product is intended for in-home use only. Do not use the product
in any commercial, rental, institutional, or therapeutic setting. This
product is intended for indoor use only.
• To avoid damage to ooring or carpet, place a non-slip rug or exercise
mat under the machine.
• Dispose of the product and all parts according to local and federal
regulations.
• Unplug the machine immediately in the event of a power failure.
• Keep sharp objects away from the product to avoid damaging it.
• Do not attempt to disassemble or repair; this machine contains no
user-serviceable parts.
3. Press the Start/Stop button to begin the manual workout at vibration speed
level 1.
4. Press the Speed Increase and Decrease buttons to adjust the vibration speed
from level 1–99 at any time during the workout. The selected speed will show in
the Speed display.
5. The workout will stop automatically when the set time ends. You may press the
Start/Stop button on the remote at any time to stop the workout.
6. Press the Power button to turn off the control panel, ip the power switch to
the OFF position, and unplug the Waver after each use.
1918
Product Specications
MADE IN CHINA
From Our Wellness Collection:
AllevaRed Light Therapy Belt
Experience the power of red and near-infrared light from the comfort
of home. The AllevaRed Belt combines 660nm red and 850nm NIR
wavelengths to deliver targeted light to both surface and deeper layers—
supporting relaxation, revitalization, and overall well-being. A simple way
to elevate your self-care routine.
SUPPORTS
DAILY COMFORT
AIDS ACTIvITY
RECOvERY
ENHANCES
RELAXATION
What it does best:
Smart & Customizable
Choose from 100 light intensity levels and
3 light modes, plus an optional pulsed-light
setting for a tailored session.
Versatile Design
Use on your back, arms, legs—even your pet
for gentle self-care, anywhere.
UNIT SPECS
Size:
27.6 x 15.7 x 5.5 in |
70 × 39.9 × 14 cm
Motor Movement:
Horizontal/Oscillation
Max. User Weight:
330 lbs. | 150 kg
Power:
200 W
Voltage:
110–120 V
Frequency:
4–12 Hz
Preset Programs:
P0–P9
Auto Shutdown:
1–15 min
Speed Levels:
1–99
Batteries Required:
AAA ×2
Net Weight:
27.8 lbs | 12.6 kg
Amplitude:
0–8 mm
Safety Instructions
Before using this product, read all safety warnings and operating instructions.
Failure to do so may result in burns, re, electric shock, serious injury or death, or
damage to the product or property. Keep this manual for reference.
INTENDED USE
• This product is not intended to be used:
• For more than 20 minutes per day.
• After consuming alcohol or other substances that could affect your balance or
make you sleepy.
• While wearing ONLY socks or slippers.
CONTRAINDICATIONS
• Consult with a medical professional before beginning a new exercise program
to determine your appropriate tness intensity and duration. Your physician can
help determine if you have any physical limitations that could create a health
risk or prevent you from properly using this product; some exercise programs or
tness products may not be appropriate for all people.
• This product is intended for use by people in good health.
• Do not use this product if you:
• Are injured, ill, or if you have an open wound, a fever, or acute inammation.
• Are pregnant, suspect you may be pregnant, or if you have recently given
birth.
• Have recently fractured a bone, injured a joint, or had surgery.
• Have severe osteoporosis, acute arthropathy or arthrosis, a spinal injury,
fracture, herniated or slipped disc, or other disc disorders, abnormal vertebra,
spinal canal stenosis, Spondylosis, gliding Spondylolisthesis, ankylosing or
cervical spondylitis, or spinal implants.
• Have a debrillator implant, a pacemaker, cochlear implant, ECG, intrathecal
pump, or other electronic medical implant that could be impacted by
electromagnetic waves.
• Have deep-vein thrombosis, deep thrombophlebitis, thrombophilia, erysipelas,
pulmonary edema, or other blood clot disorder.
• Have vertigo or positional dizziness, balance impairments, or if you are taking
drugs that affect balance.
• Have congestive heart failure, severe hypertension, arrhythmia, cardiac
dysrhythmias, severe cardiac disease, heart failure, or acute myocardial
infarction.
• Have acute migraines, retinal detachment, of if you have recently had LASIK or
PRK eye surgery.
• Consult with your physician before using this product if you:
• Are under the care of a physician for a pre-existing health condition or have
any concerns about your health.
• Have recently had a concussion or if you have epilepsy or seizures.
• Have diabetes (type 1 or 2), poor blood circulation, peripheral neuropathy
dysfunction, insensitivity to heat, or sensory deciencies, including impaired
ability to sense external temperature, or elevated body temperature.
• Have a gallstone or a kidney or bladder stone.
• Have heart or vascular disease, a blood circulation disorder, chronic
hypertension, abnormal blood pressure, if you are receiving treatment to
normalize your blood pressure, if you recently had a heart attack, if you have
had bypass surgery, or if you suffer from obesity or mobility issues.
• Have a non-electrical medical implant, such as a chest stent, joint
replacement, intrauterine device, valve, plate, pin, or rod.
• Have chronic back pain, sciatica, or other condition or disorder affecting the
back or spinal column.
• Have rheumatoid arthritis, Parkinson’s disease, or another movement disorder.
• Have a tumor or cancer, or if you suspect you may have cancerous lesions.
• Take painkillers or medicine to regulate your blood sugar.
2120
DISCLAIMER
• This product is not a medical device. This product and the information in this
manual are not intended to diagnose, treat, cure, or prevent any disease or
medical condition. The health benets suggested or implied in this manual, other
product literature, and company website are not certied or endorsed by any
regulatory authority or medical institute. The information in this document is not
a substitute for expert medical care or advice.
• The use of this product is entirely at the user’s discretion. Please read all
instructions and safety information carefully before using this product. We
assume no responsibility and expressly disclaim any and all liability for personal
injury, death, or property damage or loss sustained through improper use, failure
to follow the instructions and warnings in this manual, inadequate or improper
maintenance, or neglect of this product.
• It is the responsibility of the owner to ensure that all users of this product are
adequately informed of all warnings and cautions.
• Use this product only as instructed in this manual.
WARNING: BATTERY INGESTION HAZARD
Battery ingestion is extremely dangerous and can cause severe injury and even
death. Never allow children to play with batteries and always keep batteries out of
reach. If a battery is ingested, seek immediate medical attention.
WARNING
To reduce the risk of burns, re, electric shock, serious injury or death, or damage
to the product or property:
• Only use the provided power cable at the specied voltage. Using a power cable
other than the one provided, or using a power outlet that does not meet the
listed specications, may result in re or explosion.
• Only plug the machine into a properly grounded wall outlet, installed by a
certied electrician. Do not use with an extension cord.
• Keep away from ammable or explosive items, chemicals, re, and heat sources.
Do not operate in high temperatures or direct sunlight. Never use the product
under a blanket or pillow. Excessive heat can potentially cause re, electrocution,
or injury to people or property.
• Do not block ventilation ports to avoid overheating. Keep ventilation ports free
from dust and debris.
• Do not operate in the presence of aerosol (spray) products or corrosive gases, or
where concentrated oxygen is being administered.
• Do not use outdoors, in high-moisture environments (such as a bathroom, a
damp basement, or near a swimming pool or hot tub), or in any place where the
product may become wet to avoid electric shock. Do not immerse the product
in water or other liquids.
• Do not use this product with any other electronic devices or accessories, such
as adapters or transformers, adapters, or speed control devices, to avoid, electric
shock or injury, or product malfunction.
• Never bend, tie, pull, or twist the power cable. Unplug the power cable by
holding and pulling the plug itself, not the cord. Do not wrap the power cord
around the machine. Keep the power cord away from sharp objects.
• Never operate the machine or plug in or unplug the power cord with wet hands.
• Do not disassemble, modify, tamper with, damage, or drop the product, power
cables, or remote control. This product has no user-serviceable parts.
• Only replace the remote control batteries with new AAA batteries. Never mix old
and new batteries. Do not mix alkaline, standard, or rechargeable batteries.
• Ensure remote control batteries are inserted according to the polarity marking in
the battery compartment. Incorrect installation may cause battery leakage and
corrosion. Avoid contact with all battery residues, clean remote with a cotton
swab, wash hands thoroughly, and dispose of old batteries properly.
• Never leave the machine unattended while it is running or plugged in. Always
unplug the power cord when the machine is not in use.
• Before each use, inspect the product, power cable (the cable, connector, and
wall plug), and remote control for damage, wear, or fraying. Discontinue use
and contact customer support if the product appears to be malfunctioning or
damaged, or if the electrical components have been exposed to water.
• Do not use during electrical storms.
WARNING
To reduce the risk of serious injury or death:
• Excessive exercise or overexertion can be damaging to your health. Always
exercise within intensity and time limits recommended by your doctor.
• Stop exercising immediately and consult your doctor if you begin to feel
tired, faint, dizzy, or nauseous, or if you experience pain, irregular heartbeat, or
shortness of breath.
• Never place your head or upper body directly on the machine.
• Do not use the machine with straight legs or arms, as the vibrations are directed
to your bones and brain, which can be dangerous for your health. Always slightly
bend your legs and arms.
2322
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: Changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Industry Canada Compliance
Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’ Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes : (1) l’utilisateur de l’appareil ne doit pas produire de brouillage, et (2)
l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.
25
• This product is for adult use only. Do not allow children to play with or on the
machine; this product is not a toy.
• Keep children and pets away from the product at all times. Never leave children
unattended in the same room with the product.
• This product is not intended for use by people with reduced physical, sensory, or
mental capabilities unless supervised by a responsible adult.
CAUTION
To reduce the risk of minor or moderate injury, or damage to the product or
property:
• Do not use this product for more than 20 minutes per day.
• Always use the remote control to adjust the workout once exercise has begun.
Using the control panel while the machine is moving may result in an accident or
injury.
• Never attempt to turn around on the machine while it is in motion. Do not quickly
lean back or change position while the machine is in motion.
• Do not get on or off the machine until it is fully stopped. Do not jump on or jump
off the machine.
• Never use the product while under the inuence of drugs or alcohol.
• Use the product only on a at, sturdy, non-slip oor.
• Place in a location away from trafc where it will not create a tripping hazard.
• Ensure adequate clear space around the product during use (at least 7 feet on all
sides). Remove any obstacles in the area, in case of falls or accidents.
• Do not exceed the maximum weight-load capacity of 330 lbs.
• Never allow more than one person on the product at a time.
• Always maintain control and move slowly through exercises to avoid injury.
• Do not perform other activities while using the product to avoid injury.
• Make sure your body is used to the vibrations before you sit on or begin doing
exercises on the machine.
• Do not use while wearing socks or slippers as this may cause slipping.
• Do not wear baggy or loose clothing, clothing with drawstrings or ties, or jewelry,
belts, or other accessories that could get snagged and result in injury falling.
• Remove items, especially sharp objects, from your pockets before using.
• Keep hair, hands, feet, and clothing away from moving parts.
• Do not use accessories not approved by the manufacturer.
24
Lifepro Fitness creates quality, durable
exercise products and we stand by that
quality with a lifetime warranty on all of our
products.
If your product ever breaks (and we doubt it
will), we’ll send you replacement parts and
show you how to repair it. If the product
cannot be repaired, we’ll replace it—free of
charge.
Register the Waver
™
at
waver.lifeprotness.com to activate your
warranty within 14 days of purchase.
Lifetime
Warranty
26
Waver
™
Vibration Plate
27
FEEL THE MICRO VIBRATIONS WORKING
A STRONGER YOU STARTS TODAY
LOW-IMPACT
EXERCISE
CUSTOM
INTENSITY
ENHANCES
STABILITY
FULL-BODY
ACTIvATION
Congratulations on your purchase!
We're excited to be part of your wellness journey.
Scan the QR code to enjoy 15% off
your next Lifepro® product.
Meet Our BestSeller!
AllevaRed Light Therapy Belt
Promote whole-body wellness by applying red light therapy where you need
it most.
Targeted Red Light Therapy
Targeted red light support for daily wellness and recovery. Designed for on-
the-go relaxation and ease—helping you stay mobile, refreshed, and ready for
what’s next.
Lifeprousa Lifeprousa support@lifeprotness.com
*Discount valid on purchases of $150 or more.
