
Model: GPS201/GPS201X
20V 38mm
Brushless Pruning Shears
User Manual
CAUTION: Before using this tool, please read this manual completely, and follow all
operating safety measures.

EN 2
Original Instructions
SAFETY & INTERNATIONAL SYMBOLS...........2
SAFETY INSTRUCTIONS....................................2
KNOW YOUR UNIT.............................................6
SPECIFICATIONS.................................................7
ASSEMBLY............................................................7
OPERATION..........................................................8
MAINTENANCE....................................................9
TROUBLESHOOTING........................................12
SAFETY &
INTERNATIONAL
SYMBOLS
The following table depicts and describes
safety and international symbols and
pictographs that may appear on this product.
Read, understand, and follow all instructions
on the machine and in the user manual
for complete safety, assembly, operating,
maintenance, and repair information before
attempting to assemble and operate.
WARNING - To reduce the risk
of injury, user must read user
manual.
SAFETY ALERT – Indicates a
precaution, a warning or a
danger.
Wear eye protection.
Waste electrical products
should not be disposed of
with household waste. Please
recycle where facilities
exist. Check with your Local
Authority or local store for
recycling advice.
Guaranteed sound power
level. Noise emission to the
environment according to
the European community' s
Directive.
SAFETY INSTRUCTIONS
ORIGINAL INSTRUCTIONS
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING!
Read all safety warnings, instructions,
illustrations, and specifications provided
with this power tool. Failure to follow all
instructions listed below may result in
electric shock, fire, and/or serious injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
1. Work Area Safety
a. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust.Power
tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while
operating a power tool.Distractions can
cause you lose control of the tool or
workpiece.
2. Electrical Safety
a. Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with grounded
power tools. Unmodified plugs and
matching outlets will reduce risk of
electric shock.
b. Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges, and refrigerators.There
is an increased risk of electric shock if
your body is earthed or grounded.
c. Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
d. Do not abuse the cord. Never use the
cord for carrying, pulling, or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges, or moving parts.
Damaged or entangled cords increase the
risk of electric shock.

3 EN
e. When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
f. If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.
3. Personal Safety
a. Stay alert, watch what you are doing,
and use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol, or medication. A moment
of inattention while operating power tools
may result in serious personal injury.
b. Use personal protective equipment.
Always wear eye protection. Protective
equipment such as a dust mask, nonskid
safety shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce the risk of personal injuries.
c. Prevent unintentional starting. Ensure
the switch is in the off position before
connecting to power source and/or
battery pack, picking up, or carrying the
tool. Carrying power tools with your finger
on the switch or energizing power tools
that have the switch on invites accidents.
d. Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in
personal injury.
e. Do not overreach. Always keep proper
footing and balance. This enables better
control of the power tool in unexpected
situations.
f. Dress properly. Do not wear loose clothing
or jewelry. Keep your hair and clothing
away from moving parts. Loose clothes,
jewelry, or long hair can be caught in
moving parts.
g. If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce
dust-related hazards.
h. Do not let familiarity gained from
frequent use of tools allow you to become
complacent and ignore tool safety
principles. A careless action can
i. cause severe injury within a fraction of a
second.
4. Power Tool Use and Care
a. Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it
was designed.
b. Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the
switch is dangerous and must be repaired.
c. Disconnect the plug from the power
source and/or remove the battery
pack, if detachable, from the power
tool before making any adjustments,
changing accessories, or storing power
tools. Such preventive safety measures
reduce the risk of starting the power tool
accidentally.
d. Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e. Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts, and
any other condition that may affect the
power tool’s operation. If damaged, have
the power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
f. Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
g. Use the power tool, accessories, tool bits,
etc. in accordance with these instructions,
considering the working conditions and
the work to be performed. Use of the
power tool for operations different from
those intended could result in a hazardous
situation.
h. Keep handles and grasping surfaces
dry, clean, and free from oil and grease.
Slippery handles and grasping surfaces do
not allow for safe handling and control of
the tool in unexpected situations.
5. Battery Tool Use and Care
a. Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack

EN 4
may create a risk of fire when used with
another battery pack.
b. Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
c. When battery pack is not in use, keep it
away from other metal objects such as
paper clips, coins, keys, nails, screws, or
other small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
d. Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush
with water. If liquid contacts eyes, seek
additional medical help. Liquid ejected
from the battery may cause irritation or
burns.
e. Do not use a battery pack or tool that
is damaged or modified. Damaged
or modified batteries may exhibit
unpredictable behavior resulting in fire,
explosion, or risk of injury.
f. Do not expose a battery pack or tool to
fire or excessive temperature. Exposure to
fire or temperature above 212° F (100° C)
may cause explosion.
g. Follow all charging instructions and do not
charge the battery pack or tool outside
the temperature range specified in the
instructions. Charging improperly or at
temperatures outside the specified range
may damage the battery and increase the
risk of fire.
6. Service
a. Have your power tool serviced by an
authorized service provider using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
b. Never service damaged battery packs.
Service of battery packs should only
be performed by the manufacturer or
authorized service providers.
IMPORTANT SAFETY
INSTRUCTIONS
1. Avoid Dangerous Environment – Don’t use
appliances in damp or wet locations.
2. Don't Use In Rain.
3. Keep children away from the product
andthe working area at all times. Do not
allow them to operate or be present near
the equipment while in use.
4. Dress Properly – Do not wear loose
clothing or jewelry. They can be caught
in moving parts. Use of rubber gloves
and substantial footwear is recommended
when working outdoors. Wear protective
hair covering to contain long hair.
5. Use Safety Glasses – Always use face or
dust mask if operation is dusty.
6. Use Right Appliance – Do not use
appliance for any job except that for
which it is intended.
7. Avoid Unintentional Starting – Don't
carry plugged-in appliance with finger
on switch. Be sure switch is off when
plugging in.
8. Don't grasp the exposed cutting blades or
cutting edges when picking up or holding
the appliance.
9. Don't Force Appliance – It will do the
job better and with less likelihood of a
risk of injury at the rate for which it was
designed.
10. Don’t Overreach – Keep proper footing
and balance at all times.
11. Stay Alert – Watch what you are doing.
Use common sense. Do not operate
appliance when you are tired.
12. Store Idle Appliances Indoors – When
not in use, appliances should be stored
indoors in dry, and high or locked-up
place – out of reach of children.
13. Maintain Appliance With Care – Keep
cutting edge sharp and clean for
best performance and to reduce the
risk of injury. Follow instructions for
lubricating and changing accessories.
Inspect appliance cord periodically,
and if damaged, have it repaired by
an authorized service facility. Inspect
extension cords periodically and replace
if damaged. Keep handles dry, clean, and
free from oil and grease.
14. Check Damaged Parts – Before further
use of the appliance, a guard or other
part that is damaged should be carefully
checked to determine that it will operate
properly and perform its intended
function. Check for alignment of moving
parts, binding of moving parts, breakage

5 EN
of parts, mounting, and any other
condition that may affect its operation.
A guard or other part that is damaged
should be properly repaired or replaced
by an authorized service center unless
indicated elsewhere in this manual.
NOTE: Residual risk: although all reasonable
and necessary safety measures have been
adopted in the design, production, and
testing of this power tool to minimize
potential risks, due to the inherent
characteristics of mechanical products
and the diversity of usage scenarios, there
may still be residual risks that cannot be
completely eliminated.
SAVE THESE
INSTRUCTIONS
INTENDED USE
The pruning shears are designed for pruning
small limbs and plants. This tool is intended
for home or hobby use only. Do not use it
for professional or commercial purposes.

EN 6
KNOW YOUR UNIT
1 Mode Button
2 Power Button
3 Cutting Blade
4 Fixed Blade
5 Blade Enclosure Cover
6 Blade Cover
7 Lock-out Trigger
8 Trigger
9 Handle
10 Battery Port
11 Triangle Wrench

7 EN
SPECIFICATIONS
ASSEMBLY
1. Unpack all parts and lay them on a flat,
stable surface:
2. Remove all packing materials and shipping
devices, if applicable.
3. The scope of delivery varies depending on
the country and purchased variant.
• Pruning shears
• Battery pack
• Charger
• SK5 Blade
• Triangle wrench
• Blade cover
• User manual
NOTE: The actual accessories supplied
may vary depending on the product model,
sales region, production batch, or package
configuration.
4. If you find that parts are missing or show
damage do not use the product but
contact your dealer. Using an incomplete
or damaged product represents a hazard
to people and property.
Model GPS201/GPS201X*
Input Voltage 18 V (max 20 V)
Motor Type Brushless
Max. Cut Capacity 38 mm
Half Cut Capacity 28 mm
Cut Cycle Time 0.3 s
Recommended
Operating
Temperature
-15° C – 40° C
(27 ℉ -104 ℉)
Recommended
Storage
Temperature
-20° C – 70° C
(-4 ℉ - 158 ℉)
Weight (Tool Only) 1.05 kg
Measured Sound
Power Level LwA
73 dB(A)
K=3 dB(A)
Guaranteed Sound
Power Level LwA
(measured according
to 2000/14/EC)
77 dB(A)
Valuation of
Vibration (left hand
and right hand)
Main handle:
0.56 m/s2
K=1.5 m/s2
NOTE:
The declared noise emission value(s) and
vibration total value(s) are measured in
accordance with a standard test method,
and may be used both for comparing tools
and for making a preliminary assessment of
exposure.
WARNING!
The noise and vibration emissions during
actual use of the power tool may differ from
the declared value(s), depending on how the
tool is used. To protect the operator, hearing
protection and gloves should be worn under
actual working conditions
*20V Max battery, maximum initial battery
voltage (measured without a workload) is
20V. The nominal voltage is 18V.
*X=0-999, A-Z may vary depending on the
sales region or package configuration, with no
safety-related changes between these models.

EN 8
ATTACHING/DETACHING
BATTERY PACK
WARNING!
If any parts are broken or missing, do not
attempt to attach the battery pack to the
pruning shears or operate the pruning
shears until the broken or missing parts are
replaced. Failure to do so could result in
serious injury.
WARNING!
Use only the accessories listed below. Using
non-approved accessories may result in poor
performance or safety hazards.
Battery Pack GBA202, GBA204, GBA208
Charger GCH202, GCH204, GCH206D
NOTE: For usage instructions of the battery
pack and charger, please refer to the
respective user manuals.
WARNING!
Charge the battery pack before first use.
To install:
Align and slide the battery pack into the
port until it is locked in place.
To remove:
Press the unlock button and slide the battery
pack out.
NOTE:
The recommended charging temperature
range for the battery pack is 4°C -40°C(40 ℉ -
104 ℉ ).
NOTE:
If necessary, refer to the manuals for the
charger and the battery pack for more details.
5. Ensure that you have all the accessories
and tools needed for assembly and
operation. This also includes suitable
personal protective equipment.
WARNING!
Wear protective gloves for
this assembly work and
always lay the product on
a flat and stable surface
while assembling. Follow
the assembly instructions
step-by-step and use the
pictures provided as a visual
guide to easily assemble
the product! Do not insert
the battery pack before the
power tool is completely
assembled or adjusted!
NOTE:
The pruning shears come equipped with all
parts already assembled. Please refer to the
chapter OPERATION.
OPERATION
WARNING!
Do not allow familiarity with this product to
make you careless. Remember that a
careless fraction of a second is sufficient to
inflict serious injury.
WARNING!
Always be sure that the tool is switched
off and the battery pack is removed before
carrying out any work on the tool.
WARNING!
Before use, inspect if the blades, blade
bolts, or other parts are not worn or
damaged. Replace worn or damaged parts
for safe operation.
NOTE:
If the cutting blade gets stuck in a limb
during use, do not twist the tool. Release
the trigger, turn off the tool, and gently pull
the blade straight out. Twisting may damage
the blade.

9 EN
OPERATING THE PRUNING
SHEAR
To power on:
1. Remove the blade cover.
2. Attach the battery pack.
3. Press and hold the power button unti lthe
power button light turns blue.
4. Hold the handle and use your forefinger
to pivot the lock-out trigger upward. Press
the trigger once to open the blade, then
release. Press the trigger again to close
the blade.
To power off:
1. Hold the trigger to ensure the blade is
closed, then press the power button for 3
seconds until the blade status lights turn
off.
2. Release the trigger, remove the battery
pack, and install the blade cover.
USING THE CUTTING MODE
Full Capacity mode fully opens the blades for
pruning up to a 1.5-inch diameter.Half
Capacity mode partially opens the blades
for 1.1-inch diameter cut, ideal for repetitive
pruning.
Press the mode button to switch between
modes.
WORK AREA PRECAUTIONS
• Cut limbs or plants only.
• Do not cut materials like sheet metal,
plastics, masonry, or non-wood building
materials.
• Never allow children to use the pruning
shears. Ensure anyone using the pruning
shears has read the manual or received
proper instructions for safe use.
• Always stand on solid ground to maintain
balance while using.
• Do not use the pruning shears on a ladder;
this is extremely dangerous and should be
left to professionals.
• Avoid crossing your arms or overreaching
while using.
• Always cut away from your body.
• Do not use near electrical wires or
buildings; leave this task to professionals.
• Only use when you have adequate visibility
and lighting.
• Before starting, check the area for potential
hazards.
MAINTENANCE
WARNING!
Always switch the product off, remove the
battery pack from the product and let the
product cool down before performing any
cleaning and maintenance work!
WARNING!

EN 10
2. Flip the product onto its other side. Use the
M6 hex side of the triangle wrench to turn
the bolt counterclockwise and remove it.
Take off the toothed washer, then use the
M8 socket side of the triangle wrench to
remove the locking nut.
NOTE:
When installing the blades, ensure the bolt
is tightened to the recommended torque of
approximately 12 N·m, and the locking nut to
4 N·m.
3. Flip the product onto its other side. Remove
the gear assembly, cutting blade, and the
fixed blade one at a time.
A
B
C
A Bolt
B Toothed washer
C Locking nut
Only perform cleaning and maintenance work
according to these instructions! All further
works must be performed by a qualified
specialist! Only use specified spare parts for
replacement.
WARNING!
Wear safety gloves when handling the blades.
Otherwise it may result in personal injury.
MAINTAINING TOOL
Maintain your tool, battery pack, and charger
by following a regular maintenance routine.
Inspect the tool regularly for issues such
as unusual noise, misalignment, binding
of moving parts, broken components, or
any other conditions that may impact
performance. If any problems are identified,
bring the tool, battery pack, and charger to an
authorized MOVA service center for repair.
REPLACING THE SHEAR
BLADES
WARNING!
Remove the battery pack from the product
before replacing the blade!
WARNING!
When replacing the blade, always wear gloves
so that your hands do not directly contact the
blades.
Replace the blade:
1. Use the M3 hex side of the triangle wrench
to loosen the cover screws as much as
possible, then remove the blade enclosure
cover.
WARNING!
The upper cover screws cannot be detached
from the cover.
①
②
③

11 EN
4. Replace the cutting and fixed blade, then
reassemble by following the previous steps
in reverse order.
SHARPENING THE CUTTING
BLADE
WARNING!
Failure to replace or repair a damaged blade
can result in serious injury. The blade is
sharp—keep hands away from all cutting
edges.
1. Remove the battery pack
2. Wear protective gloves.
3. Use a fine-tooth file.
4. Keep the file level with the blade; avoid
dipping or rocking the file.
5. Apply light but firm pressure, stroking
toward the front corner of the blade.
6. Lift the file away from the blade on the
return stroke.
7. Remove any burrs from the blade.
LUBRICATION OF THE
PRUNING SHEARS
To ensure smoother operation and extend
blade life, lubricate the pruning shear blades
before and after each use. For extended use,
it is recommended to lubricate the blades
periodically during operation.
CLEANING
• Switch the product off, remove the
battery pack from the product.
• Clean the body and handles of the
product with a soft, dry cloth after each
use. Avoid using water and soap to clean
the tool.
• Do not use solvents on plastic parts,
as many plastics can be damaged by
commercial solvents. Instead, use clean
cloths to remove dirt, dust, oil, and
grease.
STORAGE
• Remove the battery pack from the pruning
shears before storage.
• Clean the product as instructed above.
• Always place the cover over the blades
before transporting or storing the tool.
• Store in a location out of reach of
children.
• Keep away from corrosive substances like
chemicals and deicing salts.
NOTE:
It’s best to store the battery pack at the
temperature of 10° C - 26° C(50 ℉ -79 ℉).
DISPOSAL
Waste product should not be disposed of
with household waste. Please recycle where
facilities exist. Check with your local
authority or retailer for recycling advice.
Users should clean up dust generated during
operation to protect environment.
Electrical products should not be
discarded with household products.
Used electrical products must be
collected separately and disposed
of at collection points provided for
this purpose. Talk with your local
authorities or dealer for advice on
recycling.

EN 12
TROUBLESHOOTING
Suspected malfunctions are often due to causes that the users can fix themselves.Therefore,
check the product using this section. In most cases the problem can be solved quickly
PROBLEM POSSIBLE CAUSE SOLUTION
Product doesn’t start
Battery pack not properly
connected.
Remove the battery pack and
attach properly.
Battery capacity is low. Charge the battery pack.
Internal damage or wear. Contact a service center for repair.
The cutting blade does
not move after pulling
the trigger:
The battery is low. Charge the battery pack.
Trigger fault.
Stop using the tool immediately, and
contact a service center for repair.
Performance decreases
over
time
Blade dull or damaged.
Keep blade sharp. Replace as
needed.
The cutting blade is
stuck in a limb or plant
The limb or plant is too
thick or too hard.
Release the switch trigger and turn off
the tool. Then pull the cutting blade
straight out slowly from the branch.
Overheating.
Operating the tool too
quickly or under excessive
load.
Allow the tool to operate at its normal
pace for optimal performance.
Blade misaligned.
Check and correct blade
alignment.
Blade dull or damaged. Keep blade sharp. Replace as needed.
Blocked motor housing
vents.
Clean the air vents.

13 EN
WARRANTY POLICY
• During the warranty period, if the product exhibits manufacturing defects (excluding
damage caused by improper use or mishandling), you may contact the MOVA after-sales
service team for support. Upon confirmation of the defect by our technicians, you will be
eligible for complimentary repair or replacement under the warranty terms.
• The warranty is only applicable to the original purchase from an authorized MOVA retailer.
• The warranty period may vary by country/region and is subject to local laws and
regulations.
Warranty period
- Personal and Household Use
• 20V, 40V Garden tools (e.g., lawn mowers, hedge trimmers): 3-year limited warranty from
the date of purchase.
• 20V, 40V Battery system (e.g., chargers, battery packs): 2-year limited warranty from the
date of purchase.
• Maintenance parts/accessories: not covered under the limited warranty.
Professional Use: For commercial, agricultural, and institutional applications: 30-day limited
warranty from the date of purchase.
During the warranty period, the following situationsare not covered under the warranty:
1. Products used for rental purposes.
2. Products whose serial number, factory label, and other identifiers have been torn off or
altered.
3. No valid purchasing document (receipt, invoice, or other) is provided to certify the date
the product was purchased.
4. Maintenance parts/accessories, including but not limited to: lawn mower blades, trimmer
blades, grass bag, mulching insert, grass trimmer head, wheels, brush cutter blade, saw
chain, belts, skid shoes, scraper bar, shear bolts, blower tube nozzles, and other similar
accessories.
5. Defects caused by normal wear and tear or normal product aging. This includes but is
not limited to scratches, dents, paint peeling, or any corrosion or discoloration caused by
overheating, abrasives, and chemical cleaners.
6. Damage caused by:
- Abuse, overloading, misuse, or unauthorized modification.
- Natural disasters, accidents, or other force majeure events.
7. Malfunctions resulting from failure to operate the product according to its instructions,
specifications, or guidelines, or due to improper maintenance, care, or storage.
8. Failures due to the use of unauthorized accessories.
9. Failures caused by repairs made by an unauthorized service center or tampering with the
product by individuals without permission from MOVA.
The warranty covers only the repair of defects specified in these terms. Any other claims
are excluded. Please note: No full unit replacement service will be provided during repairs.
MOVA reserves the right to amend these terms and retains final authority over warranty
interpretation, subject to applicable laws.
For more warranty information, please visit the official website: https://www.mova.tech/
CONTACT US
https://www.mova.tech/pages/contact-us

Manufacturer: Lawnix Technology (Nanjing) Co., Ltd.
Address: Room 501-510, 5/F, Block E (Building 2), No.10 Mozhou East Road, Jiangning
Development Zone, Jiangning District, Nanjing, Jiangsu Province, P.R.China
Made in China
