Ｕ－ＢＳ
Ｇｅｔｔｉｎｇ Ｓｔａｒｔｅｄ
Ｃｈａｒａｃｔｅｒｉｓｔｉｃｓ
１．Ｄｏｗｎｌｏａｄ ｃｏｍｐａｔｉｂｌｅ ＯＢＤ ａｐｐｓ．
２．Ｓｔａｒｔ ｔｈｅ ＥＮＧＩＮＥ．
３．Ｐｌｕｇ ｔｈｅ ＵＤ－ＢＳ ａｄａｐｔｅｒ ｉｎｔｏ ｔｈｅ
ＯＢＤ ｐｏｒｔ．
４．Ａｎｄｒｏｉｄ：Ｆｉｎｄ ｔｈｅ Ｂｌｕｅｔｏｏｔｈ
ｎａｍｅ ｏｆ ＂ＵＤ－ＢＳ ＳＰＰ ＸＸＸＸＸ＂．
５．Ａｎｄｒｏｉｄ： Ｔａｐ ｔｈｅ ｄｅｖｉｃｅ ｎａｍｅ
＂ＵＤ－ＢＳ ＳＰＰ ＸＸＸＸＸ＂， ｔｈｅｎ ｔａｐ Ｐａｉｒ．
６．Ｓｃａｎ ｔｈｅ ＱＲ－Ｃｏｄｅ
Ｖ
Ｓｅｃｕｒｅ ｅａｓｙ Ｂｌｕｅｔｏｏｔｈ ｐａｉｒｉｎｇ ｆｏｒ ｉＯＳ，
Ａｎｄｒｏｉｄ＆ Ｗｉｎｄｏｗｓ．
Ｆｕｌｌｙ ｃｏｍｐａｔｉｂｌｅ ｗｉｔｈ ｔｈｅ
ＥＬＭ３２７ｖ２．３ ＡＴ ｃｏｍｍａｎｄ ｓｅｔ．
一
ＵｎｉｆｙＤｉａｇ
ＵＤ－ＢＳ
Ａｕｔｏ－ｓｌｅｅｐ＆Ｗｉｒｅｌｅｓｓ ｗａｋｅ－ｕｐ．
ＥＮＧＩＮＥ
ＳＴＡＲＴ
ＳＴＯＰ
□００００００口
□口口
ＵｎｉｆｙＤｉａｇ
ＵＤ－ＢＳ
Ｓｌｅｅｐ ｃｕｒｒｅｎｔ ｉｓ ａｓ ｌｏｗ ａｓ ３ｍＡ．
Ｕｐ ｔｏ ２００ ｇｒｏｕｐｓ ｐａｓｓ， ｂｌｏｃｋ ｆｉｌｔｅｒｓ．
Ｆｒｅｅ ｆｉｒｍｗａｒｅ ｕｐｄａｔｅｓ．
－Ｅｎｇｌｉｓｈ －
Ｇｅｔ ｔｈｅ ｓｕｐｐｏｒｔｉｎｇ ａｐｐ ｆｒｏｍ
Ｇｏｏｇｌｅ Ｐｌａｙ（Ａｎｄｒｏｉｄ）．
Ｇｅｔ ｔｈｅ ｓｕｐｐｏｒｔｉｎｇ ａｐｐ ｆｒｏｍ ｔｈｅ
Ａｐｐ Ｓｔｏｒｅ（ｉＯＳ）．
Ｒｅｆｅｒ ｔｏ Ｓｔｅｐ ６ ｆｏｒ ｔｈｅ ｆｕｌｌ ｃｏｍｐａｔｉｂｌｅ－ａｐｐ
ｌｉｓｔ ａｎｄ ｏｐｅｒａｔｉｏｎ ｇｕｉｄｅ．
ＯＢＤ ｐｏｒｔ ｉｓ ｕｓｕａｌｌｙ ｉｎ ｄｒｉｖｅｒ＇ｓ ｆｏｏｔｗｅｌｌ
＜ Ｂｌｕｅｔｏｏｔｈ
②
Ｓｃａｎ
Ｏｎ
Ｍａｋｅ ｓｕｒｅ ｔｈｅ ｄｅｖｉｃｅ ｙｏｕ ｗａｎｔ ｔｏ ｃｏｎｎｅｃｔ ｔｏ ｉｓ
ｉｎ ｐａｉｒｉｎｇ ｍｏｄｅ．Ｙｏｕｒ ｐｈｏｎｅ（Ｇａｌａｘｙ Ｓ２０ ５Ｇ） ｉｓ
ｃｕｒｒｅｎｔｌｙ ｖｉｓｉｂｌｅ ｔｏ ｎｅａｒｂｙ ｄｅｖｉｃｅｓ．
Ａｖａｉｌａｂｌｅ ｄｅｖｉｃｅｓ
□ ＵＤ－ＢＳ ＢＬＥ ８６５０７
ＵＤ－ＢＳ ＳＰＰ ８６５０７
＜ Ｂｌｕｅｔｏｏｔｈ
②
Ｓｃａｎ ：
Ｏｎ
Ｍａｋｅ ｓｕｒｅ ｔｈｅ ｄｅｖｉｃｅ ｙｏｕ ｗａｎｔ ｔｏ ｃｏｎｎｅｃｔ ｔｏ ｉｓ
ｉｎ ｐａｉｒｉｎｇ ｍｏｄｅ．Ｙｏｕｒ ｐｈｏｎｅ （Ｇａｌａｘｙ Ｓ２０ ５Ｇ）ｉｓ
ｃｕｒｒｅｎｔｌｙ ｖｉｓｉｂｌｅ ｔｏ ｎｅａｒｂｙ ｄｅｖｉｃｅｓ．
Ａｖａｉｌａｂｌｅ ｄｅｖｉｃｅｓ
ＵＤ－ＢＳ ＳＰＰ８６５０７
Ｐａｉｒｉｎｇ
ＵＤ－ＢＳ ＢＬＥ ８６５０７
Ｂｌｕｅｔｏｏｔｈ ｐａｉｒｉｎｇ ｒｅｑｕｅｓｔ
Ｐａｉｒ ｗｉｔｈ ＵＤ－ＢＳ ＳＰＰ ８６５０７？
Ｃａｎｃｅｌ
Ｐａｉｒ
ｏｎ ｔｈｉｓ ｍａｎｕａｌ ｔｏ ｖｉｅｗ ｄｅｔａｉｌｅｄ
ｃｏｎｎｅｃｔｉｏｎ ｉｎｓｔｒｕｃｔｉｏｎｓ．
ｉＯＳ： Ｃｏｎｎｅｃｔ ｉｎ ａｐｐ， Ｓｅｅ Ｓｔｅｐ ６．
ｉＯＳ： Ｐａｉｒ ｉｎ ａｐｐ， Ｓｅｅ Ｓｔｅｐ ６．
Model: BS101
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20 cm
between the radiator & your body.
IC Warning
This device complies with Innovation, Science and Economic Development Canada
licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement
*RF warning for Mobile device:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
L'appareil a été évalué pour répondre aux exigences générales d'exposition aux RF. Cet équipement
doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.
