User Manual
NANJING MINDRAY
BIO-MEDICAL ELECTRONICS CO., LTD.
HyBase RFID Module-3
I
Copyright
©
Copyright 2026 Nanjing Mindray Bio-Medical Electronics Co., Ltd. All rights
reserved.
Release time: 2026-04
Revision: 1.0
WARNING
•
Federal Law (USA) restricts this device to sale by or on the order of
a physician or other practitioner licensed by U.S. state law to use or
order the use of this device.
Intellectual Property Statement
NANJING MINDRAY BIO-MEDICAL ELECTRONICS CO., LTD. (hereinafter called
Mindray) owns the intellectual property rights to this Mindray device and
this manual. This manual can refer to information protected by copyrights or
patents and does not convey any license under the patent rights or copyright
of Mindray, nor the rights of others.
Mindray intends to maintain the contents of this manual as confidential
information. Disclosure of the information in this manual in any manner
whatsoever without the written permission of Mindray is strictly forbidden.
Release, amendment, reproduction, distribution, rental, adaption and
translation of this manual in any manner whatsoever without the written
permission of Mindray is strictly forbidden.
， ， are the registered trademarks
II
or trademarks owned by Mindray in China and other countries. All other
trademarks that appear in this manual are used only for editorial purposes
without the intention of improperly using them. They are the property of their
respective owners.
Responsibility on the Manufacturer Party
Contents of this manual are subject to changes without prior notice.
All information contained in this manual is believed to be correct.
Mindray shall not be liable for errors contained herein nor for incidental or
consequential damages in connection with the furnishing, performance, or
use of this manual.
Mindray is responsible for the effects on safety, reliability and performance of
this product, only if:
■
all installation operations, expansions, changes, modifications and repairs
of this product are conducted by Mindray authorized personnel;
■
the electrical installation of the relevant room complies with the
applicable national and local requirements;
■
the product is used in accordance with the instructions for use.
WARNING
•
This equipment must be operated by skilled/trained clinical
professionals.
•
It is important for the hospital or organization that employs this
equipment to carry out a reasonable service/maintenance plan.
Neglect of this may result in machine breakdown or personal
injury.
III
Service
Mindray maintains a network of service representatives and factory-trained
distributors. Prior to requesting service, perform a complete operational check
of the instrument to verify proper control settings. If operational problems
continue to exist, contact Mindray service.
In North America contact the Service Department at (800) 288-2121, ext: 8116
for Technical Support or (201) 995-8000 for assistance in determining the
nearest field service location.
Please include the instrument model number, the serial number, and a
description of the problem with all requests for service.
Any questions regarding the warranty should be directed to the local sales or
service representative.
IV
Company Contact
Manufacture: Nanjing Mindray Bio-Medical Electronics Co., Ltd.
Address: 666# Middle Zhengfang Road, Jiangning, 211111
Nanjing, Jiangsu, P.R.China
Website: www.mindray.com
E-mail Address: service@mindray.com
Tel: +86 755 81888998
Fax: +86 755 26582680
Distributor:
Mindray DS USA, Inc.
Address:
800 MacArthur Boulevard, Mahwah, New Jersey,
07430 USA
Tel:
1.800.288.2121, 1.201.995.8000
Website:
www.mindray.com
V
Preface
Manual Purpose
This manual contains the instructions necessary to operate the product safely
and in accordance with its function and intended use. Observance of this
manual is a prerequisite for proper product performance and correct operation
and ensures patient and operator safety.
This manual is based on the maximum configuration and therefore some
contents may not apply to your product. If you have any question, please
contact us.
This manual is an integral part of the product. It should always be kept close to
the equipment so that it can be obtained conveniently when needed.
Intended Audience
This manual is geared for clinical professionals who are expected to perform
daily operations of the product, maintain and troubleshoot the product and
learn how to use the product.
Illustrations
All illustrations in this manual serve as examples only. They may not necessarily
reflect the setup or data displayed on your equipment.
Conventions
■
Italic text is used in this manual to quote the referenced chapters or
sections.
■
Bold text is used to indicate the screen texts.
■
→is used to indicate operational procedures.
VI
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could
void the user’s authority to operate the equipment.
Part §15.21 of the FCC rules states that users must be advised that changes or
modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
This page is intentionally blank.
VII
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help important
announcement
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This page is intentionally blank.
VIII
ISED Statement
This device complies with Industry Canada license‐exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.The digital
apparatus complies with Canadian CAN ICES
‐
3 (B)/NMB
‐
3(B)
This radio transmitter has been approved by Industry Canada to operate
with the antenna types listed with the maximum permissible gain indicated.
Antenna types not included in this list, having a gain greater than the
maximum gain indicated for that type, are strictly prohibited for use with this
device.
Radiation Exposure Statement
This equipment complies with Canada radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
1
HyBase RFID Module-3
Intended Use
The RFID module is intended to achieve module recognition.
WARNING
•
Before installing and using the RFID module, be sure to read and
fully understand this manual. To use the RFID module safely and
effectively, be sure to install and use it strictly as instructed in the
manual.
•
The RFID module is to be used for its intended purposes only. Do
not use it for other purposes.
•
Be sure to keep the manual at a place nearby the operating table.
•
Be sure to use the accessories on the operating table provided
by Nanjing Mindray only. Do not use them on other devices.
Otherwise, it may result in personal injury.
HyBase RFID Module-3
2
Specifications
1.
FCC ID: 2BHFC-RFID3
2.
RFID module (except the adaptor): IPX5
3.
AC power: 5V DC
4.
Wireless specications:
Operating frequency 106-154KHz
Modulation mode AM
Inspection before Use
The RFID module is maintenance-free. However, wear due to use and aging
can compromise its functionality and safety. Check it carefully each time
before use. Do not use it if you nd any sign of wear and/or damage.
Use
The two cables in the red box need to be powered by 5 V and 0.2 A DC power.
The green wire labeled should be connected to the 5V negative pole. The
brown wire labeled should be connected to 5V positive pole.
HyBase RFID Module-3
3
Table 2 Definitions of safety notes
Safety Notes Meaning
WARNING
Indicates a potential hazard or unsafe practice that, if
not avoided, could result in death or serious injury.
CAUTION
Indicates a potential hazard or unsafe practice that, if
not avoided, could result in minor personal injury or
product/property damage.
NOTE
Provides application tips or other useful information
to ensure that you get the most from your product.
This page is intentionally blank.
P/N : 046-035139-00(1.0)
