Devanti PWM-T-98-BU 5kg Portable Washing Machine Twin Tub

User Manual Twin Tub Washing Machine PWM-T-98-WH/PWM-T-98-BU

Introduction

Thank you for purchasing this DMR Semi Auto Washing Machine. The design of this product has adopted the special patent technology of cabinet integration. The entire body casing is made of plastic and this ensures that your DMR semi auto washing machines will never be rust eaten. The washer is relatively lighter and space saving as compared to other general twin-tub washing machines.

Through the integration of new technology, this washer with large wave pulsator and new water flow, will not only produce less twisting of the clothing but also better cleaning and washing effect. The functions of water inlet, sprinkling, spin-dry and water flow are also made available to save time, labor and water usage.

We trust that you will find your purchase of this beautifully designed and dignified-looking semi auto washing machine to your satisfaction.

Structure and parts of product

1. Spin cap
2. Spin tub
3. Spin cover
4. Water inlet
5. Control panel
6. Pulsator
7. Wash cover
8. Cabinet
9. Bottom
10. Wash timer switch
11. Wash & Drain selector switch
12. Spin timer switch
13. Drain hose
14. Power wire
15. Back cover

Washing Instructions

Preparation

1. The machine should be placed on the flat ground.
2. The plug seat should have safety ground connection.
3. Lay down the overflow hose.
4. Use the water inlet hose to connect the water tap on the water inlet.
5. Adjust the water level based on the type of clothing material and its weight.
6. Turn on the power.

Washing

1. Set the "wash & drain selector switch" according to the material type and weight of clothes.
2. Set the "wash & drain selector switch" to the wash position.
3. Set the "wash timer" and place the clothes into the tub, adjust the water level to the proper position and put in the proper amount of detergent into the wash tub.
4. Set the "wash timer" and washing machine will start to wash.
5. After wash, set the "wash & drain" selector switch to the drain position to the start draining off water.

Spinning

1. After spinning, set the water inlet hose to the water inlet of the spin tub position for 20-30 seconds.
2. According to the "spin timer" process, spinning the clothes for 1min ~ 5min, repeat once or twice.

Rinsing

1. After spinning, the spin tub will stop. Open the spin cover and from the spin tub transfer the clothes to the wash tub to prepare for rinsing.
2. Repeat the washing process but do not add any detergent.

Attention Points

• For your own safety, ensure that the ground connection is correct.
  
• Never put your hands into the spin tub whilst it is working.
  
• Never wash textiles which contain volatile materials to avoid machine damage or water blockage due to stains.
  
• The timer should always be turned clockwise.
  
• When abnormal sounds/movements occur during operation, stop the washing machine as soon as possible and check. (Please refer to troubleshooting.)
  
• When washing, the water temperature should be below 60℃. Otherwise, the plastic components may be deformed.
  

Maintenance

After use, pull out the plug to prevent accidents.

When cleaning the washing machine use a soft cloth, this will prevent scratching of the surface of the cabinet.

Do not put the washing machine outdoors or in damp areas such as the bathroom.

Do not put heavy objects on the top of the washing machine.

Do not place the washing machine near to heat-generating items such as gas cookers.

Troubleshooting

Attention: When the problem can not be resolved, please contact the Service Center.

Electrical Principle