User guide.
2
GENERAL SAFETY
INFORMATION
• This appliance has sharp
blades and moving parts,
and is NOT intended for use
by children or persons with
reduced physical, sensory, or
mental capabilities, or who lack
experience and knowledge
regarding its safe operation.
Such persons require close
supervision and thorough
instruction on its proper use
and safe operation. Close
supervision is necessary when
any appliance is used by or
near children. Children should
be supervised to ensure that
they do not play with the
appliance.
• Do not use outdoors.
• NEVER LEAVE THE
NUTRIBULLET
®
UNATTENDED
WHILE IT IS IN USE.
Important safeguards.
WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE OBSERVED, INCLUDING
THE FOLLOWING:
Warning! To avoid the risk of serious injury, carefully read all
instructions before operating your nutribullet
®
. When using any
electrical appliance, basic safety precautions should always be
observed, including the following important information.
Save these instructions!
FOR HOUSEHOLD USE ONLY
• ALWAYS UNPLUG THE
NUTRIBULLET
®
WHEN NOT
IN USE.
HEAT & PRESSURE
SAFETY
To avoid personal injury,
never blend hot or
carbonated ingredients
in any sealed
nutribullet
®
Cup!
Heated ingredients can
pressurize sealed containers
when agitated and violently
expel hot contents upon
opening. Always start the
blending process with room
temperature or refrigerated
ingredients and liquids
(21°C/70°F or cooler).
Never continuously operate
for longer than necessary
to create your recipe —
generally less than one
minute.
!
WARNING!
43
Never blend carbonated
liquids or eervescing
ingredients (e.g., baking
soda, baking powder,
yeast, etc.). Pressure from
released gases can cause
a sealed nutribullet
®
Cup to
burst, resulting in possible
injury and/or property
damage. Blade friction from
prolonged operation can heat
ingredients and generate
internal pressure in the sealed
container. This pressure
can cause the Cup and
Extractor Blade to separate
or blended contents to erupt
from the container, resulting
in possible personal injury
and/or property damage.
If the sealed nutribullet
®
Cups are warm to the touch,
power o your machine
and allow the vessel to cool
for fifteen minutes or more.
Allow contents to settle
before slowly releasing the
Cup from the Motor Base.
With the nutribullet
®
Cup,
pointed away from your face
and body, slowly unscrew
the Extractor Blade to gently
release any residual pressure.
If the unit is permitted to
run longer than one minute,
friction from the rotating
extractor blades can heat
ingredients, causing internal
pressure to build in the
sealed cup. If the cup is warm
to touch, allow it to cool
completely before carefully
opening, pointed away from
your body to avoid injury.
• After blending, allow the
contents to settle. Release
any pressure that may have
built during the extraction
process by slowly unscrewing
the blade with the container
pointed away from you.
• If you need to blend for
longer than one minute,
blend in 1-minute intervals.
After the initial and each
subsequent 1-minute
blending cycles, allow the
Motor Base to shut o
completely and wait at least
one minute before starting
another cycle.
• Do not run for more than
3 consecutive 1-minute
intervals to prevent the
contents from overheating.
Allow contents to settle for
2-3 minutes after the third
extraction cycle to prevent
overheating and buildup of
pressure.
• Do not allow blended
mixtures to sit in a sealed
container for long periods
of time! Sugar in fruits and
vegetables can ferment over
time, releasing gases and
causing pressure to build up
in a sealed nutribullet
®
Cup.
If you will not consume your
WARNING!
smoothie immediately, remove
the Extractor Blade, cover the
container with a lid or plastic
wrap, and refrigerate. Never
store any blended mixture
in a sealed nutribullet
®
cup,
either unrefrigerated or for
any prolonged period of time;
contents will spoil and ferment.
EXTRACTOR BLADE
SAFETY
Never store any Extractor Blade
in the Motor Base unattached to
a nutribullet
®
Cup. An exposed
blade can present a laceration
hazard.
BLADES ARE SHARP! HANDLE
CAREFULLY. Use care when
handling any blade. To avoid
laceration injury, do not handle
or touch any blade edge.
AVOID CONTACT WITH
MOVING PARTS! Keep hands
and utensils out of and away
from the Extractor Blade while
blending food to reduce the
risk of severe personal injury.
• To prevent leakage and
the possible separation of
components during operation,
properly align and securely
attach (hand-tighten)
the Extractor Blade to a
nutribullet
®
Cup, and check for
leakage before placing it on
the Motor Base and operating
your nutribullet
®
.
• Once you have stopped your
nutribullet
®
, wait until the
motor comes to a complete
stop and the unit powers down
completely before removing
the Cup/Extractor Blade from
the motor base. Taking the
container o the unit prior to
complete power down can
cause damage to the Extractor
Blade coupling or motor gear.
Never blend without liquid as
doing so may damage the
extractor blade or motor and
impair blending performance.
• The cyclonic action
®
of your
nutribullet
®
requires the use of
liquids to make smoothies and
other nutritious beverages. The
nutribullet
®
is not intended to
be used as an ice crusher or
without liquids. Always add
liquid to your smoothie.
• DO NOT USE the Extractor
Blade for grinding dry
ingredients such as grains,
cereal, or coee, as this may
damage the motor and/or the
Extractor Blade.
• The Extractor Blade will
grow dull with usage. We
recommend replacing your
Extractor Blade every 6
months (depending on use)
or as needed for optimal
performance.
• Certain configurations may
contain a milling blade. This
blade can be used for milling
herbs, spices, grains and seeds.
WARNING!
65
WARNING!
WARNING!
ELECTRICAL SAFETY
Do not use this product
in locations with dierent
electrical specifications or
plug types. Do not operate
with any type of plug adapter
or voltage converter device,
as these may cause electrical
shorting, fire, electric shock,
personal injury or product
damage. This appliance has
important markings on the
plug blade. The cord is not
suitable for replacement.
If damaged the appliance
should be replaced.
POLARIZED PLUG INFORMATION:
• Your nutribullet
®
has a
polarized plug (one prong
is wider than the other) to
reduce the risk of electric
shock. This plug will correctly
fit in a polarized outlet only
one way. If the plug does
not fit fully in the outlet,
reverse the plug. If it still does
not fit, contact a qualified
electrician. For your safety, do
not modify the plug or motor
base in any way. Doing so will
increase risk of injury and void
the product’s warranty.
• The use of third-party
attachments, including canning
jars, is forbiden and may cause
fire, electric shock, personal
injury, or product damage and
will void the warranty.
• To avoid risk of electric shock,
never immerse the cord, plug,
or Motor Base of blender
in water or other electrical
current conducting liquids.
Discontinue use if the cord,
plug, or Motor Base
is damaged.
• Always UNPLUG the
nutribullet
®
when it is not in
use or BEFORE assembling,
disassembling, changing
accessories, or cleaning. Do
not attempt to handle the
nutribullet
®
until all parts
have stopped moving.
• Switch o the appliance
and disconnect from supply
before changing accessories
or handling moving parts.
• CAUTION! In order to avoid
a hazard due to inadvertent
resetting of the thermal
cut-out, this appliance must
not be supplied through an
external switching device,
such as a timer, or connected
to a circuit that is regularly
switched on and o by
the utility.
• Periodically inspect all
nutribullet
®
components
for damage or wear that
may impair proper function
or present an electrical or
mechanical hazard. Assure
that power cord and plug
are undamaged. Discontinue
use and replace nutribullet
®
Cup if you detect cracking,
crazing, cloudiness or
damage to the plastic. Assure
that the blades rotate freely
and that the gasket is seated
and undamaged. Assure that
Motor Base switch actuators
are unobstructed, clean,
and depress easily. Follow
maintenance instructions
in this User Guide on pages
14-15. Never operate your
nutribullet
®
with damaged
components. If your
nutribullet
®
malfunctions
in any way, immediately
discontinue use and contact
nutribullet
®
Customer Service
at 1 (800) 523-5993.
• Do not allow the cord to hang
over the edge of the table or
counter. Do not pull, twist, or
damage the power cord. Do
not allow cord to touch hot
surfaces, including the stove.
• If the motor stops working,
unplug the Motor Base and
let it cool for an hour before
attempting to use it again.
Your nutribullet
®
has an
internal thermal breaker that
shuts o the motor when
it overheats. The thermal
breaker will reset when the
unit is unplugged and the
thermal breaker cools down
suciently.
VENTILATION
To prevent a fire hazard,
the openings on the bottom
of the Motor Base should
be free of dust or lint and
never obstructed as they
are provided for ventilation
to ensure reliable motor
operation to prevent over
heating. Never operate
your nutribullet
®
on top of
flammable materials such
as newspapers, tablecloths,
napkins, dish towels, place
mats or other similar type of
materials.
• CAUTION! Always operate
the nutribullet
®
on a level
surface, leaving unobstructed
space beneath and around
the motor base to permit
proper air circulation. Slots on
the bottom of the Motor Base
are provided for ventilation
to ensure reliable operation
and to prevent the motor from
overheating.
MICROWAVE & STOVE-
TOP HEATING SAFETY
• DO NOT BLEND HOT
INGREDIENTS! After blending
room temperature or cooler
ingredients (21°C/70°F or
less), transfer mixture to an
unsealed, microwave-safe
container or to a stovetop
pot to heat. Always use a
thermometer to test the
internal temperature of
cooked ingredients. They may
feel cool to the touch, but still
be hot inside.
• Do not place any of the
nutribullet
®
parts in a
microwave, oven, or stovetop
pot, or immerse in boiling
water, as this may result in
damage to the accessory.
87
• Avoid blending the following
seeds and pits in the
nutribullet
®
, as they contain
a chemical known to release
cyanide into the body when
ingested: apple seeds, cherry
pits, plum pits, peach pits, and
apricot pits. Fruit pits may also
cause damage to the blade
and cup.
MEDICAL SAFETY
• The information contained in
this User Guide is not meant
to replace the advice of your
physician. Always consult your
physician regarding health
and nutrition concerns.
MEDICATION INTERACTIONS:
• If you are taking any
medication, especially
cholesterol-lowering
medication, blood
thinners, blood pressure
drugs, tranquilizers, or
antidepressants, please check
with your physician before
trying any of the smoothie
recipes contained in the
Recipe Guide.
ADDITIONAL
INSTRUCTIONS FOR
PROPER USAGE
• TO AVOID LEAKAGE, DO NOT
OVERFILL THE CUP! Make
sure ingredients and liquid
do not exceed the MAX line.
The cyclonic action
®
of the
nutribullet
®
requires space to
extract eectively. Exceeding
the MAX line can result in
leakage, and may create a
dangerous pressurization
which can cause the vessel
and blade assembly to
separate.
• Cup and Extractor Blades
are specific to the exact
model of nutribullet
®
. Use
of incompatible parts (parts
from other models) may
result in damage to your
nutribullet
®
or create safety
hazards. When replacing
Cups or an Extractor Blade
or ordering additional
accessories from
nutribullet.com, or by
contacting Customer Service,
please specify the model for
parts that are compatible
with your unit.
• Periodically inspect all
nutribullet
®
components
for damage or wear that
may impair proper function
or present an electrical
hazard. Make sure that the
power cord and plug are
undamaged. Discontinue
use and replace blending
vessels if you detect
cracking, cloudiness, or
other damage to the vessel,
tabs on the vessel, or
Actuator Tabs of the Motor
Base. Ensure that the blades
rotate freely and that the
structure is undamaged.
Make sure that the Motor
Base is unobstructed and
clean. Follow maintenance
recommended on pages 13
and 14 and never operate
your nutribullet
®
with
damaged components.
If your nutribullet
®
malfunctions in any way,
immediately discontinue
use and contact Customer
Service at 1 (800) 523-
5993. You may purchase
new nutribullet
®
Cups,
and Extractor Blades
at nutribullet.com or by
contacting Customer
Service. We recommend
replacing your cup every six
months or as needed.
Save these
instructions!
If you have any comments,
questions, or concerns, please
go to nutribullet.com. Or call
Customer Service at:
1 (800) 523-5993.
!
109
Contents.
10 What’s included
11 Assembly guide
12 nutribullet
®
cup assembly & use
16 Care & maintenance.
16 How to clean the nutribullet
®
17 Replacement parts
18 nutribullet
®
one-year limited warranty
21 Warranty registration
Thank you for purchasing the nutribullet
®
Pro+.
1211
Assembly guide.
nutribullet
®
cup
extractor blade
motor base
Product configurations may vary. To see our full list of nutribullet
®
accessories please visit nutribullet.com
What’s included.
motor base
32oz cup 24oz cup
extractor blade 2 to-go lids2 cup rings
PULSE
PULSE
PULSE
14
Plug the power cord into
an electrical outlet.
Place the Motor Base on
a clean, dry, level surface
such as a counter or table.
5
2
4
Place the Extractor Blade
onto the Cup and twist until
it is tightly sealed.
6
Turn the Cup upside-down
and place it onto the Motor
Base, gently push and twist.
Blend mode lasts for
one minute.
NOTE: Blending should not require
longer than one minute to yield
smooth and creamy results.
PLEASE KEEP
THESE IMPORTANT
SAFEGUARDS IN
MIND WHEN USING
THE NUTRIBULLET
®
:
• Make sure the Motor Base is
plugged in for use.
• Handle the Extractor Blade
assembly with care, as the
blades are sharp.
• Never run the nutribullet
®
while empty.
• nutribullet
®
accessories are
not intended to be used in the
microwave as it may damage the
accessories.
• Never leave the nutribullet
®
unattended while in use.
Never blend hot ingredients
when using any nutribullet
®
Cup.
Heated ingredients can
pressurize inside sealed
containers when agitated and
violently expel hot contents
upon opening. Always start the
blending process with room
temperature or refrigerated
ingredients and liquids
(21°C/70°F or cooler).
WARNING!
nutribullet
®
Pro+ cup
assembly & use
1 Review all warning and
caution statements in the
Important Safeguards
section (pg. 2-8) before
proceeding to Step 2.
The default mode is Blend
mode. When you plug in the
Motor Base, you are in
Blend mode.
When you rotate a nutribullet
®
Cup clockwise on the Motor
Base, the safety interlock
engages, the blue LED light
illuminates, and Blend mode
runs for 60 seconds. The unit
stops and the LED light turns o.
3
PULSE
PULSE
BLEND MODE:
Add ingredients and liquid
to the nutribullet
®
Cup.
NOTE: Do not overfill! To avoid
leakage, do not add ingredients
beyond the MAX line.
13
CAUTION
Do not remove the Extractor
Blade from the nutribullet
®
Cup
until blending has completely
ceased. Do not use the Extractor
Blade as a storage lid for your
Cup. Some foods may contain
active ingredients or release
gases that will expand if left in
a sealed container, resulting in
excessive pressure buildup that
can pose a risk of injury. When
storing contents in the Cup,
use plastic wrap or foil to seal
your container. Always point
contents away from your body
when unsealing.
CAUTION
Do not remove the Extractor
Blade from the nutribullet
®
Cup
until blending has completely
ceased. Do not use the Extractor
Blade as a storage lid for your
Cup. Some foods may contain
active ingredients or release
gases that will expand if left in
a sealed container, resulting in
excessive pressure buildup that
can pose a risk of injury. When
storing contents in the Cup,
use plastic wrap or foil to seal
your container. Always point
contents away from your body
when unsealing.
16
PULSE
Unlock the assembly
by gently pushing and
untwisting the Cup
counter-clockwise.
5
1 Follow steps 1-5 on pages
12-13.
Because the nutribullet
®
motor
is so powerful, it emulsifies the
ingredients you extract. That
is why when you want to make
foods such as chunky salsa or
coarse chopped onions, Pulse
mode is key. Pulsing takes a tiny
bit of getting used to, but once
you get a feel for it, you’ll be a
pro in no time!
PULSE
Turn the Cup upside down
and place it onto the Motor
Base, gently push and twist.
Then, quickly press the
Pulse button, stopping the
motor.
2
PULSE
Press and hold the Pulse
button to make the
Extractor Blade turn.
Release the Pulse button
to stop the blades. Let the
Extractor Blade come to a
complete stop after each
Pulse. Press the button
again until you reach your
desired consistency.
4
PULSE
PULSE MODE:
PULSE
3
The Pulse button will flash
BLUE now that it’s in
Pulse mode.
NOTE: Pulse mode is active
for 1 minute, and then it times
out. If the Cup is still in the ON
position, nothing will happen. The
Cup must be rotated counter-
clockwise to OFF position, and
then normal function may be
resumed.
7
Once Blend mode ends,
unlock the assembly
by gently pushing and
untwisting the Cup
counter-clockwise.
To manually stop Blend
mode, simply twist the
Cup counter-clockwise
to disengage the safety
interlock. Once the Motor
Base and Blade stop
completely, remove the
Cup from the Motor Base.
15
1817
Care & maintenance.
MOTOR BASE:
• For the most part, the Motor
Base doesn’t really get dirty,
but if you neglect to twist the
Extractor Blade on to the Cup
tightly, liquids can leak out
and get into the base and
stick to the activator buttons.
• To avoid risk of injury, NEVER
use your hands or utensils
to clean the white Actuator
Tabs while the nutribullet
®
is
plugged in.
• Do not remove the rubber or
plastic liners inside the
Motor Base.
• Use a sponge or dish cloth
dampened with warm soapy
water to wipe down the inside
and outside of the Motor Base
until clean.
• Pay particular attention to
the white Actuator Tabs on
the inner rim of the Motor
Base to loosen any sticky
debris from drips and spills.
If necessary, you may use a
small brush to scrub the area
to ensure it is kept clean.
WARNING: Never submerge
the Motor Base in water or other
liquids.
Here’s how to clean
the nutribullet
®
:
STEP 1:
The most important
thing — ALWAYS UNPLUG
the Motor Base from the
power supply outlet when
it is left unattended, before
assembling, disassembling,
changing accessories or
approaching parts that move
in use or when cleaning. Do not
attempt to handle the appliance
until all parts have stopped
moving!
STEP 2:
Remove the Cup/Extractor Blade
assembly from the Motor Base.
STEP 3:
Clean the individual components
(Motor Base, Extractor Blades,
nutribullet
®
Cups) as follows:
Cleaning the nutribullet
®
is easy.
Simply place any of the pieces
(except for the Motor Base and
Extractor Blade) on the TOP
RACK of the dishwasher or hand-
wash with warm soapy water
and rinse.
replace immediately to
prevent possible personal
injury.
• NEVER USE A CUP WITH A
BROKEN, DAMAGED, OR
MISSING TAB, AS DOING SO
MAY CAUSE THE CUP AND
MOTOR BASE TO SEPARATE
EXPOSING THE BLADE
ASSEMBLY!
STUBBORN CLEAN UP:
• If ingredients dry inside the
nutribullet
®
Cup, make your
cleanup a snap by filling the
cup about 2/3 full with room
temperature (21°C/70°F or
less) water and twisting on
the Extractor Blade. Place
the Cup/Extractor Blade
assembly on the nutribullet
®
Motor Base for about 20-30
seconds. This will loosen the
stuck-on ingredients.
EXTRACTOR BLADE:
• DO NOT REMOVE THE
GASKET as this will
permanently damage the
Extractor Blade and cause
leakage. If after washing as
indicated above, additional
cleaning is desired, you may
rinse with a 10% vinegar/water
solution or with lemon juice. If,
over time, the gasket becomes
loose or damaged, you may
order a new Extractor Blade
at nutribullet.com or contact
Customer Service.
• Dry the Extractor Blade
completely. It is helpful to
turn the blade on its side in
your dish drainer to ensure
BOTH SIDES of the Extractor
Blade are completely dried.
NUTRIBULLET
®
CUPS &
TO-GO LIDS (included with
some configurations):
• These items are all TOP
RACK dishwasher safe. We
recommend rinsing them
and giving them a quick
brush with a dish brush to
remove any dried debris
before washing them in the
dishwasher. NEVER use the
sanitize cycle to wash the
Cups as this may warp the
plastic.
• Regularly check the 3 tabs
on the side of the Cup for
cracking, crazing, breakage
or rounding. If damaged,
Replacement parts.
To order additional parts and
accessories, please visit our
website at nutribullet.com/
shop/accessories or feel free
to contact Customer Service:
1 (800) 523-5993.
2019
nutribullet
®
Pro+
one-year limited
warranty.
LIMITED WARRANTY
FOR NUTRIBULLET
®
nutribullet's limited warranty
obligations are confined to the
terms set forth below:
nutribullet, LLC and Capital
Brands Distribution, LLC
(together, “nutribullet”)
warrants this nutribullet
®
against defects in materials
and workmanship for a period
of one year from the date of
original retail purchase. This
limited warranty is valid only in
the country in which the product
is purchased and comes
with the product at no extra
charge, however shipping and
processing fees will be incurred
for returns, replacements and/
or refunds.
If a defect exists, and this
limited warranty is valid, at its
option nutribullet
®
will (1) repair
the product at no charge, using
new or refurbished replacement
parts, (2) exchange the product
with a product that is new or
that has been manufactured
from new or serviceable used
parts and is at least functionally
equivalent to the original
product, or (3) refund the
purchase price of the product. A
replacement product assumes
the remaining warranty of the
original product. A repaired
product has a one-year
warranty from the date of
repair. When a product or part
is exchanged, any replacement
item becomes your property
and the replaced item becomes
nutribullet’s property. When a
refund is given, your product
becomes nutribullet’s property.
OBTAINING WARRANTY
SERVICE
For limited warranty service,
simply call our Customer
Service Department at
1 (800) 523-5993 or contact
us via email from our website
at nutribullet.com, simply click
the contact us link, fill out and
submit the customer contact
form and we will be glad to
help you. When you contact our
Customer Service Department
you will be asked for your name,
address, telephone number
and to provide proof of the
original purchase (receipt)
containing a description of the
product(s), purchase date, and
the appropriate nutribullet
®
serial number(s). Before you
send your product for limited
warranty service please make
sure to keep a copy of all
relevant documents for your
files (receipt, etc.). It is always
recommended to purchase
product insurance and tracking
services when sending your
product for service. Remember,
shipping and processing fees
will be incurred by you and are
not covered by the one-year
limited warranty.
EXCLUSIONS & LIMITATIONS
This nutribullet
®
One-Year
Limited Warranty applies only to
nutribullet
®
products distributed
by or for nutribullet
®
that can
be identified by the “nutribullet”
trademark, trade name, logo
and bar code. nutribullet’s One-
Year Limited Warranty does
not apply to any inauthentic
products not distributed/sold by
nutribullet, LLC.
Normal wear and tear is not
covered by this limited warranty.
This limited warranty applies
to household use only, and is
void when the product is used
in a commercial or institutional
setting.
This limited warranty
extends only to the original
consumer purchaser and is
not transferable. In addition,
proof of purchase must
be demonstrated.
Repair or replacement of
the product (or, if repair or
replacement is not feasible, a
refund of the purchase price)
is the exclusive remedy of the
consumer under this limited
warranty. nutribullet, LLC shall
not be liable for any incidental
or consequential damages for
breach of this limited warranty
or any implied warranty on this
product.
This limited warranty gives
you specific legal rights, and
you may also have other rights
which vary from state to state.
nutribullet
®
is not liable for
any damage to products not
covered by this warranty (e.g.,
cups, book, User Guide).
This limited warranty does not
apply: (a) to damage caused
2221
by accident, abuse, misuse,
or misapplication; (b) to
damage caused by improper
maintenance (including
unauthorized parts service);
(c) to a product or a part that
has been modified in any way;
(d) if any nutribullet
®
serial
number or trademark has
been removed or defaced;
(e) commercial or institutional
usage; and/or (f) if the product
has been used with an adapter/
converter.
THIS LIMITED WARRANTY
AND THE REMEDIES SET
FORTH ABOVE ARE EXCLUSIVE
AND IN LIEU OF ALL OTHER
WARRANTIES, REMEDIES
AND CONDITIONS, WHETHER
ORAL OR WRITTEN, EXPRESS
OR IMPLIED. NUTRIBULLET
®
SPECIFICALLY DISCLAIMS ANY
AND ALL IMPLIED WARRANTIES,
INCLUDING, WITHOUT
LIMITATION, WARRANTIES
OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR
PURPOSE. IF NUTRIBULLET
®
CANNOT LAWFULLY DISCLAIM
IMPLIED WARRANTIES UNDER
THIS LIMITED WARRANTY,
ALL SUCH WARRANTIES,
INCLUDING WARRANTIES
OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED IN
DURATION TO THE DURATION
OF THIS LIMITED WARRANTY.
No nutribullet
®
reseller, agent,
or employee is authorized to
make any modification to this
warranty.
NUTRIBULLET
®
IS NOT
RESPONSIBLE FOR DIRECT,
SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES
RESULTING FROM ANY BREACH
OF WARRANTY OR CONDITION,
OR UNDER ANY OTHER LEGAL
THEORY, INCLUDING BUT NOT
LIMITED TO LOST PROFITS,
DOWNTIME, GOODWILL,
DAMAGE TO OR REPLACEMENT
OF EQUIPMENT AND PROPERTY.
NUTRIBULLET
®
SPECIFICALLY
DOES NOT REPRESENT THAT IT
WILL BE ABLE TO REPAIR ANY
PRODUCT UNDER THIS LIMITED
WARRANTY.
Some states and provinces
do not allow the exclusion
or limitation of incidental or
consequential damages or
exclusions or limitations on the
duration of implied warranties
or conditions, so the above
limitations or exclusions may not
apply to you. This warranty gives
you specific legal rights, and you
may also have other rights that
vary by state or province.
Warranty registration.
How to find serial number
under the Motor Base.
Please visit nutribullet.com/
warranty-registration or call
1 (800) 523-5993 to register
your new nutribullet
®
. You will
be asked to enter the Serial
Number* of your product, along
with the purchase date and
place of purchase.
The registration will enable us to
contact you in the unlikely event
of product safety notification.
By registering your product you
acknowledge to have read and
understood the instructions for
use, and warnings set forth in
the accompanying instructions.
Capital Brands Distribution, LLC | nutribullet.com | All rights reserved.
nutribullet
®
and the nutribullet
®
logo are trademarks of CapBran Holdings, LLC
registered in the U.S.A. and worldwide.
Illustrations may dier from the actual product. We are constantly striving
to improve our products, therefore the specifications contained herein
are subject to change without notice.
221228_N12-1001MK
