To reduce the risk of injury, the user must read and understand the Operator’s
Manual before using this product. Save these instructions for future reference.
2
1. SAFETY INFORMATION
1.1 Operating Safety
1.2 Service Safety
1.3 Safety While Using Combustion Engines
1.4 Service Safety
1.5 Chemical Handling
2. General Information
2.1 Design and Features
2.2 TOMAHAWK® Engine
2.3 Adjustable Pressure
2.4 Spraying Accessories
2.5 Specifications
3. ASSEMBLY GUIDE
4. OPERATION
4.1 Start Up Guide
4.2 Sprayer Operation
4.3 Stopping the Engine
5. PUMP QUICK FIX
6. REPLACEMENT PARTS
7. WARRANTY
8. MAINTENANCE
9. TROUBLESHOOTING
10. TRANSPORTATION & STORAGE
11. PARTS MANUAL
12. CALIFORNIA EMISSION CONTROL WARRANTY
Table of Contents
4
5
5
6
6
7
7
7
7
7
7
8
8
9
9
10
10
11
12
12
13
14
15
16
24
3
Register Your Equipment
Thank you for purchasing TOMAHAWK® equipment! Your product is covered by the
TOMAHAWK® Warranty Policy, but in order to activate your warranty, we need you to register
your product. In addition to activating your equipment warranty, product registration will
grant you access to important product updates, streamlined customer service, and more.
INCLUDED WITH YOUR REGISTRATION
STEPS TO REGISTER YOUR EQUIPMENT
1. Visit www.tomahawk-power.com
2. Choose “Product Registration” at the bottom of the page
3. Enter your equipment’s serial number to get started
4. Provide all required information
5. Submit Registration
Equipment Resources
TOMAHAWK® Customer Service doesn’t stop at checkout. We understand to keep a job-site
running smoothly - the proper equipment, spare parts, instruction manuals, and more are
needed at the drop of a hat. Visit www.tomahawk-power.com to gain access to the incredible
resources below.
How To Video Library
More of a visual person? Visit our Video Library for equipment
assembly instructions, troubleshooting tips, and more!
Found on each product listing or the Service Videos Page
Manual and Assembly Guide Library
Visit our Manual Library if you are looking for a lost
operations manual or a particular spare part?
Found on each product listing or the Tomahawk Manuals Page
Service Requests
Service Request and a Tomahawk Technician will respond
shortly to get you the help you need.
Choose “Service Request” at the bottom of www.tomahawk-power.com
4
This manual provides information and procedures to safely operate and maintain this
equipment. For your own safety and protection from injury, carefully read, understand and
observe the safety instructions described in this manual.
Keep this manual or a copy of it with the equipment. If you lose this manual or need an
additional copy, please contact Tomahawk Power LLC or visit
www.tomahawk-power.com
This equipment is built with user safety in mind; however, it can present hazards if
improperly operated and serviced. Follow operating instructions carefully. If you have
questions about operating or servicing this equipment, contact Tomahawk Power.
The information contained in this manual is based on equipment’s production at the time of
publication. Tomahawk Power reserves the right to change any portion of this information
without notice.
No part of this publication may be reproduced in any form or by any means, electronic or
Tomahawk Power.
Any type of reproduction or distribution not authorized by Tomahawk Power represents an
make technical modifications, even without due notice, which aim at improving our
machines or their safety standards.
1. SAFETY INFORMATION
This manual contains DANGER, WARNING, CAUTION, and NOTE call-outs which must be
followed to reduce the possibility of personal injury, damage to the equipment, or improp-
er service.
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury
or death.
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
DANGER
WARNING
CAUTION
5
CAUTION: Used without the safety alert symbol, CAUTION indicates a potentially hazardous
situation which, if not avoided, may result in property damage.
1.1 Laws Pertaining to Spark Arresters
Notice: State Health Safety Codes and Public Resources Codes specify that in certain
locations spark arresters be used on internal combustion engines that use hydrocarbon
fuels. A spark arrester is a device designed to prevent accidental discharge of sparks or
Forest Service for this purpose.
In order to comply with local laws regarding spark arresters, consult the engine distributor or
the local Health and Safety Administrator.
1.2 Operating Safety
Familiarity and proper training are required for the safe operation of equipment!
Equipment operated improperly or by untrained personnel can be dangerous! Read
the operating instructions contained in both this manual and the engine manual and
should receive instruction from someone familiar with the equipment before being allowed
to operate the machine.
1.2.1 NEVER allow anyone to operate this equipment without proper training. People
operating this equipment must be familiar with the risks and hazards associated with it.
1.2.2 NEVER
1.2.3 NEVER use accessories or attachments that are not recommended by Tomahawk
Power. Damage to equipment and injury to the user may result.
1.2.4 NEVER leave machine running unattended.
1.2.5 ALWAYS be sure operator is familiar with proper safety precautions and operation
techniques before using machine.
1.2.6 ALWAYS wear ANSI Z87.1-approved safety goggles or safety glasses with side shields,
or when needed, a face shield. Use a dust mask in dusty work conditions. Also use non-skid
safety shoes, hardhat, gloves, dust collection systems, and hearing protection when
appropriate. This applies to all persons in the work area.
1.2.7 ALWAYS close fuel valve on engines equipped with one when machine is not being
operated.
1.2.8 ALWAYS store equipment properly when it is not being used. Equipment should be
stored in a clean, dry location out of the reach of children.
1.2.9 ALWAYS operate machine with all safety devices and guards in place and in working
order. DO NOT modify or remove safety devices. DO NOT operate machine if any safety devic-
es or guards are missing or inoperative.
1.2.10 ALWAYS read, understand, and follow procedures in Operator's Manual before
attempting to operate equipment.
WARNING
6
1.3 Safety while using Combustion Engines
Internal combustion engines present special hazards during operation and fueling!
Read and follow warning instructions in engine owner's manual and safety guidelines
below. Failure to follow warnings and DANGER safety guidelines could result in severe injury
or death.
1.3.1 DO NOT run machine indoors or in an enclosed area such as a deep trenches unless
-
1.3.2 DO NOT smoke while operating machine.
1.3.3 DO NOT smoke when refueling engine.
1.3.4 DO NOT refuel hot or running engine.
1.3.5 DO NOT refuel engine near open flame.
1.3.6 DO NOT spill fuel when refueling engine.
1.3.7 DO NOT run engine near open flames.
1.3.8 ALWAYS refill fuel tank in well-ventilated area.
1.3.9 ALWAYS
1.3.10 ALWAYS check fuel lines and fuel tank for leaks and cracks before starting engine.
1.3.11 DO NOT run machine if fuel leaks are present or fuel lines are loose.
1.4 Service Safety
Poorly maintained equipment can become a safety hazard! In order for the
equipment to operate safely and properly over a long period of time, periodic
maintenance and occasional repairs are necessary.
1.4.1 DO NOT attempt to clean or service machine while it is running. Rotating parts can
cause severe injury.
1.4.2 DO NOT crank a flooded engine with the spark plug removed on gasoline-powered
engines. Fuel trapped in the cylinder will squirt out the spark plug opening.
1.4.3 DO NOT test for spark on gasoline-powered engines, if engine is flooded or the smell of
gasoline is present. A stray spark could ignite fumes.
1.4.4 DO NOT use gasoline or other types of fuels or flammable solvents to clean parts,
1.4.5 ALWAYS
1.4.6 ALWAYS replace worn or damaged components with spare parts designed and
recommended by Tomahawk Power.
1.4.7 ALWAYS disconnect spark plug on machines equipped with gasoline engines, before
servicing, to avoid accidental start-up.
1.4.8 ALWAYS keep machine clean and labels legible. Replace all missing and hard-to-read
labels. Labels provide important operating instructions and warn of dangers and hazards.
1.4.9 ALWAYS check for damaged parts before each use. Carefully check that the trowel will
operate properly and perform its intended function. Replace damaged or worn parts
immediately. Never operate the trowel with a damaged part.
DANGER
WARNING
7
1.5 Chemical Handling
1.5.1 ALWAYS wear eye protection when handling chemicals.
1.5.2 ALWAYS wear the proper protective equipment/clothing when handling chemicals.
Proper protective equipment includes safety goggles or glasses, mask/respirator, and a
long-sleeved shirt and long pants.
1.5.3 ALWAYS use mask to protect mouth and face from dust and/or pesticide when
handling chemicals.
1.5.4 ALWAYS
2. GENERAL INFORMATION
2.1 Design and Features
The TOMAHAWK® Motorized Concrete Sprayer is the ideal portable tool for applying most
water based concrete curing compounds, retardents, and sealants - achieve superior
pump again and maintain constant pressure up to 435 PSI for even spraying with a powerful
1.8HP engine.
2.2 TOMAHAWK® Engine
2.3 Adjustable Pressure
With a powerful pump, maintain constant, adjustable pressure from 50-435 PSI you will
achieve even spraying!
2.4 Spraying Accessories
Visit www.tomahawk-power.com for a wide assortment of attachments and spraying
nozzles, including these.
Water Tank Adapter
Simply hook up the TOMAHAWK® Motorized Concrete Sprayer to your
anywhere from masonry, concrete, asphalt, rebar, and more!
Foundation Gun
pressurized jet to a conical pattern. Built with tough brass and
stainless steel.
DANGER
FOR USE WITH WATER-BASED OR WATERBORNE COMPOUNDS ONLY.
DO NOT USE
EQUIPMENT WITH SOLVENT-BASED OR EXPLOSIVE LIQUIDS. FAILURE TO COMPLY MAY CAUSE
SERIOUS BODILY HARM OR DEATH. READ ALL CHEMICAL MANUALS BEFORE OPERATION.
8
2.5 Specifications
3. ASSEMBLY GUIDE
3.1 Sprayer Parts
Remove all parts from the packaging. You will not need all parts for this set up.
Additional Parts
Backpack Straps
Tool Kit
Concrete Sprayer
Brass Wand + Fan Nozzle
Handle Press
Hose
Model TCS6.5
Engine Type 2 Stroke
Engine Power 1.8 HP
Tank Capacity 6.5 Gallon (25 Liters)
Working Pressure 50 - 435 PSI
Flow Rate 2.5 GPM (9.5 LPM)
Fuel Type 50:1 Gasoline / Oil Mixture
Pump Type Brass Diaphragm
Start Type Recoil
Fuel Tank 35 oz (1 Liter)
Dimensions 18 x 13 x 25 in (46 x 33 x 64 cm)
Net Weight
26 lbs (11.7kg)
9
Pour 50:1 Pre Mix 2 Stroke engine fuel into
the fuel tank.
Locate the gas cap, unscrew and fill.
3. ASSEMBLY GUIDE CONTINUED
4. OPERATION
4.1 Start Up Guide
Fasten the hose (D) to the backpack
sprayer’s pump.
To attach the straps, feed the end through
the metal bar and down through the buckle.
Attach the brass wand (B)
to the handle press (C).
Fasten the hose (D) to the backpack
sprayer’s pump.
4.1 Start Up Guide Continued
4.2 Sprayer Operation
4.2.1 Attach your desired nozzle or spraying attachment to the hose.
4.2.2 Start the engine using the guide above.
4.2.3
4.3 Stopping the Engine
4.3.1 Stop spraying to interrupt the flow of liquid pesticide.
4.3.2 Move the Throttle Lever up to the idle position.
4.3.3 Press the Red Stop Button located above the throttle handle.
4.3.4 Move the choke to the closed position.
4.3.5 Remember: Do not run the motor without liquid in the tank, as this can ruin the
bearings in the pump which are water cooled.
10
Prime the fuel injection pump
3-5 times.
Slowly pour your liquid into the
chemical tank.
Place the choke down into the
closed position .
Pull the recoil starter 1-3 times
until the engine is starts.
Place the choke up into the
open position.
Maintain the engine running on idle
for 3-5 minutes before spraying.
WARNING
Do not allow the recoil starter to snap back against the engine.
Return it gently to prevent damage to the starter.
Important Tip: Remember to rinse the tank with 5 gallons of water
to remove any chemicals that may crystallize in the pump, hose,
and attachments.
5. PUMP QUICK FIX
Start the engine and keep it in idle.
Using a 10mm socket wrench, loosen the 4
bolts on the right & left sides of the pump.
Loosen the left screw on the left side.
Loosen the right screw on the left side.
Loosen the left screw on the right side.
Loosen the left screw on the left side. Look
for water begin flowing through the tubes.
11
6. REPLACEMENT PARTS
6.1 For replacement parts and technical questions visit www.tomahawk-power.com or scan
the QR code on the front of this manual.
6.2 Not all equipment components are available for replacement. The illustrations within
this manual are a convenient reference to the location and position of parts in the assembly
sequence.
6.3 When ordering parts, the following will be required: equipment model number, serial
number/lot, date code, and description. The distributor reserves the right to make design
changes and/or improvements to equipment, parts, accessories, and manuals without
notice.
7. WARRANTY
Your new TOMAHAWK® equipment is warranted to the original purchaser for a period of
one-year (12 months) from the original date of purchase. The TOMAHAWK® warranty is
against defects in design, materials and workmanship.
The following are not covered under the warranty:
7.1 Damage caused by abuse, misuse, dropping or other similar damage caused by or as a
result of failure to follow assembly, operation or user maintenance instructions.
7.2 Alterations, additions or repairs carried out by persons other than TOMAHAWK® or their
recognised agents.
7.3 Transportation or shipment costs to and from TOMAHAWK® or their recognised agents,
for repair or assessment against a warranty claim, on any machine.
7.4 Materials and/or labor costs to renew, repair or replace components due to fair wear and
tear.
7.5 TOMAHAWK® and/or their recognized agents, directors, employees or insurers will not be
reason of or the inability to use the machine for any purpose.
Warranty Claims
Before submitting any warranty claim, your new TOMAHAWK® equipment should be
registered through www.tomahawk-power.com. Follow the steps on page 3 to complete the
directed to TOMAHAWK® through the online Service Request form found at
www.tomahawk-power.com/pages/service-request.
12
13
8. MAINTENANCE
Maintain the equipment in accordance with the following recommended procedures. Refer
to the engine manufacturer’s instruction manual for additional information about engine
maintenance. The following chart is based on a normal operation schedule.
Check the fuel level
Clean the cylinder head
Replace the spark plug
Inspect chemical tank & hoses
Inspect the fuel lines
Inspect the air filter and replace if
needed
hardware
Flush pump and hoses with clean
water to clear system.
Check and clean the spark plug
Clean the fuel strainer
Check and adjust the valve
clearance
Change the engine oil
Clean the air filter
DAILY
BEFORE/
AFTER
STARTING
AFTER
FIRST 20
HOURS OR 3
MONTHS
AFTER
FIRST 50
HOURS OR 6
MONTHS
AFTER
FIRST 100
HOURS OR
EVERY YEAR
AFTER
FIRST 200
HOURS OR
EVERY
2 YEARS
14
PROBLEM CAUSE SOLUTION
Failed to push fuel-injec ng pump
Push fuel-injec ng pump un l fuels
runs through lines
Water mixed with fuel Replace the fuel
Deteriora on of spark plug or carbon
build up
Replace the spark plug
Bad contact between spark plug and
lead wire
Check the spark plug
The choke is the fully open Open to full posi on
Wrong ra o of fuel Replace
Water In Fuel Replace the fuel
The air lter is dirty Check and clean
Outlet of cylinder and mu er are
dirty
Remove the dirt
Piston, piston ring, and/or cylinder
have been worn
Replace
Fuel is out Add fuel (50:1 premix)
The lead wire of the plug is loose Check and replace
Spark plug is covered with carbon Replace the spark plug
The lter is clogged Clean
Water in fuel Replace fuel (50:1 premix)
The air vent in the tank lid is clogged Clean
Fails to Start
It starts but cannot
run at high speed
It runs but does not
work e ciently
Stops while running
9. TROUBLESHOOTING
1515
PROBLEM CAUSE SOLUTION
Inlet and/or outlet valves are blocked Replace or Clean
Washer is damaged Replace
Bearing is damaged Replace
Piston is damaged Replace
Not enough pressure Regulate
Not enough elas c force regula ng
spring
Replace
Corrosion resistant steel ball worn Replace
Pressure regula ng valve worn Replace
Piston is worn Replace
Piston running distance is not enough Replace
Inlet valve and outlet valve are worn Replace
Spraying parts are clogged Clean
The holes of spraying sheet are worn Replace
Spraying parts are clogged Clean
Pressure is ne but
spraying is low
Spraying mist is low
Liquid does not
spray out
Low or no pressure
spraying
9. TROUBLESHOOTING CONTINUED
10. TRANSPORTATION & STORAGE
16
17
18
19
20
21
22
23
24
12. CALIFORNIA AND FEDERAL EMISSION CONTROL WARRANTY STATEMENT YOUR
WARRANTY RIGHTS AND OBLIGATIONS
The California Air Resources Board, the United States Environmental Protection Agency and
2022-2023 small engine/equipment (SORE). In the United States and California, new small
engine/equipment must be designed, built and equipped to meet the State's stringent
anti-smog standards. Tomahawk Power, LLC must warrant the emissions control system on
your small engine/equipment for the periods of time listed below provided there has been
no abuse, neglect or improper maintenance of your small engine/equipment.
Your emission control system may include parts such as the carburetor, fuel-injection
system, the ignition system, catalytic convertor, fuel tanks, fuel lines, fuel caps, valves,
canisters, filters, vapor hoses, belts, clamps, connectors, and other associated emission-
related components. For engines less than or equal to 80 cc, only the fuel tank is subject to
the evaporative emission control warranty requirements of this section.
(California Only)
engine/equipment at no cost to you including diagnosis, parts and labor.
MANUFACTURER'S WARRANTY COVERAGE:
The emissions control system is warranted for two years. If any emissions-related part on
your small engine/equipment is defective, the part will be repaired or replaced by
Tomahawk Power, LLC
OWNER'S WARRANTY RESPONSIBILITIES:
As the small engine/equipment owner, you are responsible for the performance of the
required maintenance listed in your owner's manual. Tomahawk Power, LLC recommends
that you retain all receipts covering maintenance on your small engine/ equipment, but
Tomahawk Power, LLC cannot deny warranty solely for the lack of receipts or for your failure
to ensure the performance of all scheduled maintenance.
As the small engine/equipment owner, you should however be aware that Tomahawk Power,
LLC may deny your warranty coverage if your small engine/equipment or a part has failed
due to abuse, neglect, improper maintenance or unapproved modifications.
You are responsible for presenting your small engine/equipment to distribution center or
days.
1525
If you have any questions regarding your warranty rights and responsibilities, you should
contact Tomahawk Power, LLC customer service representative at 1-866-577-4476 or Email:
support@tomahawk-power.com .
DEFECTS WARRANTY REQUIREMENTS
(a) The warranty period begins on the date the small engine/equipment is delivered to an
ultimate purchaser.
(b) General Emissions Warranty Coverage. Tomahawk Power, LLC warrants to the ultimate
purchaser and each subsequent owner that the engine/equipment is:
(1) Designed, built, and equipped so as to conform with all applicable regulations adopted
by the Air Resources Board; and
(2) Free from defects in materials and workmanship that causes the failure of a warranted
part for a period of two years.
related parts is as follows:
(1) Any warranted part that is not scheduled for replacement as required maintenance in
your Owner's Manual is warranted for the warranty period stated above. If the part fails
during the period of warranty coverage, the part will be repaired or replaced by Tomahawk
Power, LLC according to Subsection (4) below. Any such part repaired or replaced under
warranty will be warranted for the remainder of the period.
(2) Any warranted part that is scheduled only for regular inspection in your Owner's Manual
is warranted for the warranty period stated above. Any such part repaired or replaced under
warranty will be warranted for the remaining warranty period.
(3) Any warranted part that is scheduled for replacement as required maintenance in your
Owner's Manual is warranted for the period of time before the first scheduled replacement
date for that part. If the part fails before the first scheduled replacement, the part will be
repaired or replaced by Tomahawk Power, LLC according to Subsection (4) below. Any such
part repaired or replaced under warranty will be warranted for the remainder of the period
prior to the first scheduled replacement point for the part.
(4) Repair or replacement of any warranted part under the warranty provisions herein must
be performed at a warranty station at no charge to the owner.
(5) Notwithstanding the provisions herein, warranty services or repair will be provided at all
of our distribution centers that are franchised to service the subject small engine/
equipment.
(6) The small engine/equipment owner must not be charged for diagnostic labor that leads
to the determination that a warranted part is in fact defective, provided that such diagnostic
work is performed at a warranty station.
(7)Tomahawk Power, LLC is liable for damages to other small engine/equipment
26
(8) Throughout the small engine/equipment warranty period stated above, Tomahawk
demand for such parts.
(9) Any replacement part may be used in the performance of any warranty maintenance or
repairs and must be provided without charge to the owner. Such use will not reduce the
warranty obligations of Tomahawk Power, LLC
be grounds for disallowing a warranty claims. Tomahawk Power, LLC will not be liable to
part.
(11) The manufacturer issuing the warranty shall provide any documents that describe that
manufacturer's warranty procedures or policies within five working days of request by the
Air Resources Board.
EMISSION WARRANTY PARTS LIST
The repair or replacement of any warranted part otherwise eligible for warranty coverage
the small engine/equipment has been abused, neglected, or improperly maintained, and
that such abuse, neglect, or improper maintenance was the direct cause of the need for
repair or replacement of the part. That notwithstanding, any adjustment of a component
that has a factory installed, and properly operating, adjustment limiting device is still eligible
for warranty coverage. The following emissions warranty parts for each engine family list is
covered.
For engine families greater than 80cc:
(1) Fuel Metering System:
(a) Gasoline carburetor assembly and its internal components
(b)Carburetor gaskets
(c) Fuel tank
(d) Fuel Line
(e) Fuel Line Fittings
(f) Clamps
(g) Pressure regulator (if equipped)
(2) Air Induction System including:
(a) Intake pipe/manifold
(b) Air cleaner
(3) Ignition System including:
(a) Spark plug
(b)Ignition coil
27
SEAL THE DEAL
WITH THE FINISHING TOUCH
Tomahawk Power Trowels are perfect for projects
including driveways, basements, and commercial jobs.
Adjust from 0-28
°
with the trowels 4 combo, steel blades
to achieve a matte, light gloss, or gleaming finish!
Item #:
JXPT36K, JXPT46K, TPT36H, TPT46H
36
AND
46 CONCRETE
POWER TROWELS
www.tomahawk-power.com
1.6HP Backpack Concrete Vibrator
Part#: TVIBH + TVW10-P
1.6 HP Honda GX35 engine
Consolidation with speeds of 10,000-12,000 VPM
Quick Connect centrifugal clutch vibrator
1 and 2 Diameter Whips Available in 10ft Length
3 Year Engine Warranty & 1 Year Product Warranty
8 Gas Powered Concrete Scarifier
Part#: TSCAR8H
5.5 HP Honda GX160 Engine
Remove traffic lines at 800 - 1,000 linear ft/hr
Tungsten Carbide Blade Kit Available
OSHA approved dust port for silica vacuum removal
3 Year Engine Warranty & 1 Year Product Warranty
36 & 46 Concrete Power Trowel
Part#: TPT36H/K & TPT46H/K
6 HP/14HP Kohler & 5.5HP/8.5HP Honda Engines
Adjust trowel blade pitch from 0-28°
60-115 RPM rotor speed for superior concrete finishes
Includes float pan and trowel blades
3 Year Engine Warranty & 1 Year Product Warranty
3,550 lbs/ft Vibratory Rammer
Part#: TR68H
3.6 HP Honda GXR120 Engine
Easily achieve a 100% compaction rating
3-in-One Fuel System with carburetor protection
13 x 11 plate for narrow trenches and corners
3 Year Engine Warranty & 1 Year Product Warranty
3,400 lbs/ft Plate Compactor
Part#: TPC90H
5.5 HP Honda GX160 Engine
Easily achieve a 100% compaction rating
22 x 20 cold, rolled steel beveled base plate
Includes 3.5 gallon water tank for asphalt compaction
3 Year Engine Warranty & 1 Year Product Warranty
3,000 lbs/ft Plate Compactor
Part#: TPC80 & TPC80H
6 HP Kohler CH260 & 5.5 HP Honda GX160 Engines
Easily achieve a 100% compaction rating
16.5 x 21.5 plate for narrow trenches and corners
Optional Honda Engine model: TPC80H
3 Year Engine Warranty & 1 Year Product Warranty
6.5 Gal Backpack Concrete Sprayer
Part#: TCS6.5
Maintain constant, adjustable pressure up to 450 PSI
Achieve superior concrete finishes with even spraying
Spray 15,000 sq ft in less than 10 minutes
Compatible with major manufacturer wands
1 Year Product Warranty
1.6 HP Vibratory Concrete Screed
Part#: TVSA-H
1.6 HP Honda GX35 Engine
Aluminum Magnesium blades available from 8ft - 14ft
Finish concrete 4X faster than other screed methods
360° adjustable handle placement
3 Year Engine Warranty & 1 Year Product Warranty
6 Early Entry Green Concrete Saw
Part#: TFS6H
5.5 HP Honda GX160 Engine
Maximum cutting depth of 1 3/16 inches
OSHA compliant vacuum port for dust collection
Includes 6 early entry concrete blade
3 Year Engine Warranty & 1 Year Product Warranty
1.6HP Backpack Concrete Vibrator
Part#: TVIBH + TVW10-P
1.6 HP Honda GX35 engine
Consolidation with speeds of 10,000-12,000 VPM
Quick Connect centrifugal clutch vibrator
1 and 2 Diameter Whips Available in 10ft Length
3 Year Engine Warranty & 1 Year Product Warranty
8 Gas Powered Concrete Scarifier
Part#: TSCAR8H
5.5 HP Honda GX160 Engine
Remove traffic lines at 800 - 1,000 linear ft/hr
Tungsten Carbide Blade Kit Available
OSHA approved dust port for silica vacuum removal
3 Year Engine Warranty & 1 Year Product Warranty
36 & 46 Concrete Power Trowel
Part#: TPT36H/K & TPT46H/K
6 HP/14HP Kohler & 5.5HP/8.5HP Honda Engines
Adjust trowel blade pitch from 0-28°
60-115 RPM rotor speed for superior concrete finishes
Includes float pan and trowel blades
3 Year Engine Warranty & 1 Year Product Warranty
3,550 lbs/ft Vibratory Rammer
Part#: TR68H
3.6 HP Honda GXR120 Engine
Easily achieve a 100% compaction rating
3-in-One Fuel System with carburetor protection
13 x 11 plate for narrow trenches and corners
3 Year Engine Warranty & 1 Year Product Warranty
3,400 lbs/ft Plate Compactor
Part#: TPC90H
5.5 HP Honda GX160 Engine
Easily achieve a 100% compaction rating
22 x 20 cold, rolled steel beveled base plate
Includes 3.5 gallon water tank for asphalt compaction
3 Year Engine Warranty & 1 Year Product Warranty
3,000 lbs/ft Plate Compactor
Part#: TPC80 & TPC80H
6 HP Kohler CH260 & 5.5 HP Honda GX160 Engines
Easily achieve a 100% compaction rating
16.5 x 21.5 plate for narrow trenches and corners
Optional Honda Engine model: TPC80H
3 Year Engine Warranty & 1 Year Product Warranty
6.5 Gal Backpack Concrete Sprayer
Part#: TCS6.5
Maintain constant, adjustable pressure up to 450 PSI
Achieve superior concrete finishes with even spraying
Spray 15,000 sq ft in less than 10 minutes
Compatible with major manufacturer wands
1 Year Product Warranty
1.6 HP Vibratory Concrete Screed
Part#: TVSA-H
1.6 HP Honda GX35 Engine
Aluminum Magnesium blades available from 8ft - 14ft
Finish concrete 4X faster than other screed methods
360° adjustable handle placement
3 Year Engine Warranty & 1 Year Product Warranty
6 Early Entry Green Concrete Saw
Part#: TFS6H
5.5 HP Honda GX160 Engine
Maximum cutting depth of 1 3/16 inches
OSHA compliant vacuum port for dust collection
Includes 6 early entry concrete blade
3 Year Engine Warranty & 1 Year Product Warranty
Ramm
er
Ramm
er
Tomahawk understands to keep a job-site running smoothly the proper equipment and
spare parts are needed at the drop of a hat. With same day shipping and faster
delivery times, count on Tomahawk to keep you powered throughout the day! With
long lasting parts and engines, Tomahawk equipment will be the star of your fleet for
years to come. Visit www.tomahawk-power.com to get started today!
Power Your World
FACEBOOK
facebook.com/TomahawkPowerUSA
YOUTUBE
youtube.com/TomahawkPower
INSTAGRAM
@tomahawkpower
TOMAHAWK®, LLC
San Diego, CA
Sales Support
(866) 577-4476
Equipment Support
(866) 577-4476
www.tomahawk-power.com
