Water Leak Detector is a device that sounds an alarm once detecting water drip or leak.
Components:
Indicator: For reflecting the status of the detector
Sensor: Detecting Dripping
Alarm: Alarm Sound
Test Key: Pairing, testing, pausing alerts
Probe: Detecting water seepage
Batteries: AAA battery × 2
Specifications
Working Voltage: 2 × AAA Batteries
Transmission Frequency: 433MHz
Waterproof Level: IP66
Alarm Volume: 100dB
Wireless Transmission: >100m (open area)
Alarm Duration: 15s/First time (The second alarm sounds every 15s and lasts for 24 hours.)
Installing your Device
Place the sensor of the water leak detector in the place where you need to strengthen the water level detection.
Using your device
1. Detecting Dripping
Water Seepage Alarm
Water Dropping Alarm
Note:
Two detection sensors of parallel lines will immediately alarm when they detect water, and two sensors of diagonal lines will not alarm when they detect water at the bottom of the detector.
The device is still not dehydrated after the detector alarm is over, then the flood detector will continue to alarm every 15s until the dehydration or press the button to cancel the alarm. It will not make a regular alarm prompt if it's still immersed in water after 24 hours.
2. Removing the Alarm
Press the button to cancel the alarm.
3. Low Power Prompt
"Di Di Di" - Red light is flashing
Charging the Batteries:
Remove the cover on the back to access the battery compartment.
Remove the used batteries and replace them with equivalent models (2 × AAA batteries).
Put the cover back on and test your detector.
Customer Service
Warranty: 12-month Limited Warranty
Battery Recycling
Do not dispose of used batteries with your household waste, but in the recycling bins provided.
