MANUAL
Aroma Diffuser
Content
CONTENT.............................................................. 1
FUNCTION............................................................ 2
OPERATION.......................................................... 3
PRECAUTIONS..................................................... 4
MAINTENANCE.....................................................5
ADDITIONAL INFO................................................6
FAQ........................................................................7
CONTACT..............................................................8
1
FUNCTION
ULTRASONIC
PLATE
2
OPERATION
Remove cover.
If mist is not being produced, gently wipe the ultrasonic plate within the water tank with a dry
paper towel, clean the inside of the tank with a small amount of neutral detergent. Refill with
water and restart the diffuser.
Fill diffuser with water. Do not fill
beyond “Max Fill” marker. Add
essential oils after water is added.
Replace cover.
Diffuser will automatically shut off at the end of its timer, or if the water runs out, whichever
comes first.
Insert AC adapter.
Connect AC
adapter to outlet.
Diffuser automatically turns off when it runs out of water.
Turn on Diffuser
●
Press “Mist” one time to turn on the diffuser.
(The default setting runs for 1 hour)
●
Press “Mist” a second time to run the diffuser for 3 hours.
●
Press “Mist” a third time to run the diffuser for 6 hours.
●
Press “Mist” a fourth time to run the diffuser until out of water.
●
Press “Mist” a fifth time to turn off the diffuser.
●
Pressing and holding the “Mist” button for 3 seconds while the diffuser is on will change
from Hi to Low mist output. Press and hold mist again, to return to the previous power setting.
Lights
●
Press “Light” one time to begin cycling through light colors.
●
Press “Light” a second time, to freeze the light on its current color.
●
Press “Light” to cycle through preset color choices, or until lights turn off.
3
PRECAUTIONS
Please check below to avoid malfunction of the unit:
● Do not fill water above the 300Ml “Max Fill” line.
● Always use the measuring cup to fill the diffuser.
● Do not turn on while water tank is empty.
● Do not touch the ultrasonic plate while device is on.
● Unplug the unit when handling, cleaning, or maintenance.
● Keep away from direct sunlight, heat sources, and other electronics.
● Only operate the diffuser on a hard, flat surface.
● Do not move the diffuser while running or when water is in the tank.
● Keep out of reach of children and pets.
● For any other questions or concerns, contact us at
[email protected] or call 800-446-0535.
4
MAINTENANCE
We recommend cleaning the diffuser after using every 9-10 times:
1.) Unplug the AC adapter from the main unit.
2.) Empty the water from the tank as demonstrated below in photo.
3.) Use a damp clean cloth soaked in tap water to wipe the basin and
remove any oil residue from the ultrasonic plate. (Do not use harsh
cleaners or alcohol.)
4.) Plug the AC adapter back into the main unit, refill with fresh water,
and enjoy.
5
ADDITIONAL INFO
ACCIDENTAL LEAKAGE
1. Product MAX use time: 16 hours.
2. Water vapor amounts vary. This is normal.
3. Factors that affect above reason include water type, humidity,
temperature, and air currents.
4. Diffuser automatically powers off when water runs out.
5. Use only 100% natural essential oils. Chemicals and other
impurities can cause damage.
1. Unplug the unit and remove cover.
2. Empty the water from tank.
3. Shake the unit gently to drain water and keep it in a well
ventilated area.
4. Allow the unit to dry for 48 hours before turning back on.
In the event of the diffuser being knocked over and/or water
reaching any area outside of the basin, follow the steps below.
6
FREQUENTLY ASKED QUESTIONS
What is ultrasonic diffusion technology?
▪ Ultrasonic diffusion technology utilizes a vibrating plate to break
apart the bonds between water molecules and essential oil
molecules, producing a cool vapor mist with the fragrance of the oil.
What can I add to my diffuser?
▪ For best results, we recommend using filtered water and 100%
natural essential oils or absolutes. Always make sure your
essential oils are natural and unadulterated for the sake of your
health and to protect your diffuser.
How many drops of essential oil should I add?
▪ We recommend starting with 5-6 drops of your favorite essential
oil to a full tank of water. Feel free to add more or less
depending on your strength preference and the shape of your room.
What is the max running time?
▪ Depending on the timer setting, your diffuser will run up to 16
hours with a full tank of water.
Why is no mist coming out?
▪ If there is no mist coming out, then follow these steps:
1.) Make sure there is no more than 300Ml of water in the tank.
Use the max fill line for reference.
2.) Make sure the basin of the tank is cleaned and there is no oil
residue on the ultrasonic plate. Follow maintenance instructions
to clean.
3.) Make sure dust has not gathered in the fan, on the bottom of
the unit, preventing air flow.
Diffuser does not turn on?
▪ If the diffuser is not turning on, disconnect and reconnect power
cables. Make sure water is in the tank and below the max fill line.
7
CONTACT HATHASPACE
www.Hathaspace.com
800-446-0535
@Hathaspace
Facebook.com/hathaspace
8
