When calling for parts or
service, please specify
the following number
:
Model#: 20-2021
CAUTION:
Weight on this product should not exceed 250 lbs.
Owner's Manual
This Product is Distributed Exclusively by
2040 N. Alliance, Springeld, MO 65803
Customer Care
1 (800) 375-7520
www.staminaproducts.com
Product May Vary Slightly From Pictured.
STAMINA PRODUCTS
MADE IN CHINA
©
2011 Stamina Products, Inc.
2017, 05
Exercise can present a
health risk. Consult a
physician before beginning
any exercise program with
this equipment. If you feel
faint or dizzy, immediately
discontinue use of this
equipment. Serious bodily
injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur
if all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
securely tightened prior to
each use. Follow all safety
instructions in this manual.
!
WARNING
Ab/Hyper Pro
TABLE OF CONTENTS
Safety Instructions ...................................... 2
Before You Begin ........................................ 4
Equipment Warning, Caution & Notice Labels
... 5
Hardware Identication Chart .................... 6
Assembly Instructions ................................ 7
Operational Instructions ........................... 10
Storage ....................................................... 11
Maintenance ............................................... 11
Conditioning Guidelines ........................... 12
Warm-Up and Cool-Down ......................... 13
Product Parts Drawing .............................. 14
Parts List .................................................... 15
Warranty ..................................................... 16
Notes ........................................................... 17
Fax/Mail Ordering Form ............................ 18
SAFETY INSTRUCTIONS
2
1. Save these instructions and ensure that other exercisers read this manual prior to using the Ab/
Hyper Pro for the rst time.
2. Read all warnings and cautions posted on the Ab/Hyper Pro.
3. The Ab/Hyper Pro should only be used after a thorough review of the Owner’s Manual. Make
sure that it is properly assembled and tightened before use.
4. We recommend that two people be available for assembly of this product.
5. Keep children away from the Ab/Hyper Pro. Do not allow children to use or play on the Ab/Hyper
Pro. Keep children and pets away from the Ab/Hyper Pro when it is in use.
6. It is recommended that you place this exercise equipment on an equipment mat.
7. Set up and operate the Ab/Hyper Pro on a solid level surface. Do not position the Ab/Hyper Pro
on loose rugs or uneven surfaces.
8. Make sure that adequate space is available for access to and around the Ab/Hyper Pro.
9. Keep ngers clear of all pinch points when folding and unfolding the Ab/Hyper Pro.
10. Before using, inspect the Ab/Hyper Pro for worn or loose components, and securely tighten or
replace any worn or loose components prior to use.
11. Consult a physician prior to commencing an exercise program and follow his/her
recommendations in developing your tness program. If at any time during exercise you feel faint,
dizzy, or experience pain, stop and consult your physician.
12. Always choose the workout which best ts your physical strength and exibility level. Know your
limits and train within them. Always use common sense when exercising.
13. Do not wear loose or dangling clothing while using the Ab/Hyper Pro.
14. Never exercise in bare feet or socks; always wear proper footwear such as running, walking, or
cross training shoes that t well, provide foot support, and feature non-skid rubber soles.
15. Be careful to maintain your balance while using, mounting, dismounting, or assembling the Ab/
Hyper Pro, loss of balance may result in a fall and serious bodily injury.
16. The Ab/Hyper Pro should not be used by persons weighing over 250 pounds.
17. The Ab/Hyper Pro should be used by only one person at a time.
18. The Ab/Hyper Pro is for consumer use only. It is not for use in public or semipublic facilities.
!
WARNING
This product contains a chemical known to the State of California to cause
cancer and birth defects or other reproductive harm.
Consult your physician before starting this or any exercise program. This is
especially important if you are over the age of 35, have never exercised before,
are pregnant, or suer from any health problem. This product is for home use
only. Do not use in institutional or commercial applications. Failure to follow
all warnings and instructions could result in serious injury or death.
To reduce the risk of serious injury, read the following Safety Instructions
before using the Ab/Hyper Pro.
!
WARNING
!
WARNING
NEED HELP?
CONTACT US FIRST
1 (800) 375-7520
customer.care@staminaproducts.com
Hi! From all of us here at Stamina Products, thank you for your purchase. We
know that you have big fitness goals in mind and we are here to help you along.
Call us, email us, or send us a message on Facebook. Be sure to contact us if you
have any questions on your new product. We look forward to hearing from you!
With your body in mind,
Stamina Customer Care
To enact your extended warranty and to help us better
serve you, please go online and register your new product.
register.staminaproducts.com
ONLINE
customer.care@staminaproducts.com
www.staminaproducts.com
TELEPHONE
1 (800) 375-7520
FAX
(417) 889-8064
MAIL
Stamina Products, Inc.
ATTN: Customer Care
P.O. Box 1071
Springfield, MO 65801-1071
facebook.com/StaminaProducts
facebook.com/AeroPilates
CUSTOMER CARE HOURS:
Monday-Thursday, 7:30 AM-5:00 PM, Central Time
Friday, 8:00 AM-3:00 PM, Central Time
It is quick and easy to register online, but if you’re a little old school or just need a
reason to raise that little flag on your mailbox, fill out the info on the last page of this
manual and mail it in.
BEFORE YOU BEGIN
4
Support Post
Ankle Support
Hand Grip
Cushion Support
Frame
Foam Roll
Seat Cushion
Knee Cushions
Seat Adjustment
THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY :
Endcap
Foot Support
Handlebar Post
Endcap
Wrench
Combination Wrench
Locking Pins
Caution Label
Thank you for choosing the Ab/Hyper Pro. We
take great pride in producing this quality product
and hope it will provide many hours of quality
exercise to make you feel better, look better, and
enjoy life to its fullest.
It's a proven fact that a regular exercise
program can improve your physical and mental
health. Too often, our busy lifestyles limit our time
and opportunity to exercise. The Ab/Hyper Pro
provides a convenient and simple method to begin
your journey of getting your body in shape and
achieving a happier and healthier lifestyle.
Before reading further, please review the
drawing below and familiarize yourself with the
parts that are labeled.
Read this manual carefully before using the Ab/
Hyper Pro.
Although Stamina constructs its products with
the nest materials and uses the highest standards
of manufacturing and quality control, there can
sometimes be missing parts or incorrectly sized
parts. If you have any questions or problems with
the parts included with your Ab/Hyper Pro, please
do not return the product. Contact us FIRST!
If a part is missing or defective, please go to
staminaproducts.com under the Customer Care
section and order the part needed, or call us toll
free at 1-800-375-7520 (in the U.S.). Our Customer
Care Staff is available to assist you from 7:30
A.M. to 5:00 P.M. (Central Time) Monday through
Thursday and 8:00 A.M. to 3:00 P.M. (Central
Time) on Friday.
Be sure to have the name and model number of
the product available when you contact us.
Label is larger than actual size
This chart is provided to help identify the warning, caution, and notice labels on the Ab/Hyper Pro.
Please take a moment to familiarize yourself with all of the warning, caution, and notice labels.
EQUIPMENT WARNING, CAUTION & NOTICE LABELS
CAUTION LABEL(28)C1
5
6
length
length
mm.
in.
INCHES
This chart is provided to help identify the hardware used in the assembly process. Place the washers or
the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to
check the length of the bolts and screws.
NOTICE: The length of all bolts and screws, except those with flat
heads, is measured from below the head to the end of the bolt
or screw. Flat head bolts and screws are measured from the
top of the head to the end of the bolt or screw.
After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.
MILLIMETERS
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1/2 1 1/2 2 1/2 3 1/2 4 1/2 5 1/2 6
6 8 10 12
3/16" 1/4" 5/16" 3/8" 1/2"
HARDWARE IDENTIFICATION CHART
Part No. and Description Qty
20 Bolt, Hex Head (M10 x 1.5 x 20mm) 4
17 Bolt, Hex Head (M10 x 1.5 x 65mm) 2
19 Bolt, Hex Head (M10 x 1.5 x 75mm) 1
18 Bolt, Hex Head (M10 x 1.5 x 120mm) 1
21 Bolt, Hex Head (M10 x 1.5 x 140mm) 2
22 Bolt, Round Head (M6 x 1 x 34mm) 4
23 Nylock Nut (M10 x 1.5) 6
24 Washer (M10) 18
ASSEMBLY INSTRUCTIONS
7
STEP 1
Attach the CUSHION SUPPORT FRAME(4) to the SUPPORT POST(5) with HEX BOLT(M10x1.5x75mm)
(19), WASHERS(M10)(24), and NYLOCK NUT(M10x1.5)(23). Lock the CUSHION SUPPORT FRAME(4)
in position with the LOCKING PIN(32).
STEP 2
Make sure the long ends of the Foot Plates on the FOOT SUPPORT(7) point to front. Insert the FOOT
SUPPORT(7) into the SUPPORT POST(5) and secure with HEX BOLTS(M10x1.5x65mm)(17),
WASHERS(M10)(24), and NYLOCK NUTS(M10x1.5)(23).
FRONT
BACK
The long ends of the Foot Plates
on the FOOT SUPPORT(7) must
point to front.
Place all parts from the box in a cleared area and position them on the oor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
(in the U.S.). Our Customer Care Sta is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
ASSEMBLY INSTRUCTIONS
8
STEP 3
Attach the two CUSHION RAILS(2) to the CUSHION SUPPORT FRAME(4) with HEX BOLT
(M10x1.5x140mm)(21), WASHERS(M10)(24), and NYLOCK NUT(M10x1.5)(23).
NOTE: Tighten until snug, the CUSHION RAILS(2) must be allowed to pivot.
STEP 4
Slide the SEAT ADJUSTMENT(9) around CUSHION SUPPORT FRAME(4) and between the CUSHION
RAILS(2). To attach the open end of the SEAT ADJUSTMENT(9) to the CUSHION RAILS(2), insert the
HEX BOLT(M10x1.5x140mm)(21) through the WASHERS(M10)(24), CUSHION RAILS(2), SPACERS(25),
SEAT ADJUSTMENT(9), LONG SPACER(26), and tighten together with NYLOCK NUT(M10x1.5)(23).
Refer to the Illustration.
NOTE: Tighten until snug, the CUSHION RAILS(2) must be allowed to pivot.
STEP 5
The SEAT CUSHION(1) can be adjusted to three dierent incline positions. To position the SEAT CUSHION
(1) to desired elevation, select one of the holes in the SEAT ADJUSTMENT(9) and attach the SEAT
ADJUSTMENT(9) to one of the holes in the CUSHION SUPPORT FRAME(4) with the LOCKING PIN(32).
STEP 6
Attach the SEAT CUSHION(1) to the CUSHION RAILS(2) with ROUND HEAD BOLTS(M6x1x34mm)(22).
ASSEMBLY INSTRUCTIONS
9
STEP 7
Attach the ANKLE SUPPORT(8) to the SUPPORT POST(5) with a HEX BOLT(M10x1.5x120mm)(18),
four WASHERS(M10)(24), and a NYLOCK NUT(M10x1.5)(23). Refer to the illustration for washer location.
Slide the FOAM ROLLS(10) onto both sides of the ANKLE SUPPORT(8).
STEP 8
Attach the KNEE CUSHIONS(3) to the HANDLEBAR POST(6) with HEX BOLTS(M10x1.5x20mm)(20) and
WASHERS(M10)(24). Insert the HANDLEBAR POST(6) into the SUPPORT POST(5) and lock in position
with the LOCKING PIN(32).
NOTE: There are the selection holes in the HANDLEBAR POST(6) for adjusting the height of the KNEE
CUSHIONS(3).
OPERATIONAL INSTRUCTIONS
10
Once you have completed the assembly of your Ab/Hyper Pro, please read the following instructions to
help you begin your exercise routine.
This machine is used to develop your abdominal area and your lower back. The following exercise routine
shows you how to get a complete stomach and back workout. The following illustrations show you how to
use the Ab/Hyper Pro. Before you begin any exercise routine consult your physician.
Back Hyper Extension Sit - up
( The seat will adjust to three
dierent incline positions to
vary your workout intensity. )
Knee - ins
TRAINING PROGRAM
:
Beginner - 1 set of 8 to 12 repetitions
Advanced - 2 to 4 sets of 8 to 12 repetitions
EXERCISE PROGRAM
1. To store the Ab/Hyper Pro, simply keep it in a clean dry place.
2. The Ab/Hyper Pro must be lifted for movement. Two people may be required.
3. Follow the following process to fold the Ab/Hyper Pro as illustrated for easy storage.
The safety and integrity designed into the Ab/Hyper Pro can only be maintained when the Ab/Hyper
Pro is regularly examined for damage and wear. Special attention should be given to the following:
1. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
2. Verify that the CAUTION LABEL(28) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement CAUTION LABEL(28) if it is missing or damaged.
3. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
4. Worn or damaged components must be replaced immediately or the Ab/Hyper Pro removed from
service until repair is made.
5. Only Stamina Products supplied components should be used to maintain/repair the Ab/Hyper Pro.
6. Keep your Ab/Hyper Pro clean by wiping it o with an absorbent cloth after use.
STORAGE
MAINTENANCE
11
a. Remove the LOCKING PIN(32) to adjust the KNEE
CUSHIONS(3) to lowest position. Then lock in position
with the pin.
b. Remove the LOCKING PIN(32) from the SEAT
ADJUSTMENT(9) to fold down the SEAT CUSHION(1).
Store the pin in the hole on the CUSHION SUPPORT
FRAME(4).
c. Remove the LOCKING PIN(32) from the SUPPORT
POST(5) to fold the CUSHION SUPPORT FRAME(4).
Store the pin in the same hole in the SUPPORT
POST(5).
How you begin your exercise program depends on your physical condition. If you have been inactive for
several years or are severely overweight, start slowly and increase your workout time gradually. Increase
your workout intensity gradually by monitoring your heart rate while you exercise.
Initially you may only be able to exercise within your target zone for a few minutes; however, your aerobic
capacity will improve over the next six to eight weeks. It is important to pace yourself while you exercise
so you don't tire too quickly.
Measure your heart rate periodically during your workout by stopping the
exercise but continuing to move your legs or walk around. Place two or
three ngers on your wrist and take a six second heartbeat count. Multiply
the results by ten to nd your heart rate. For example, if your six second
heartbeat count is 14, your heart rate is 140 beats per minute. A six second
count is used because your heart rate will drop rapidly when you stop
exercising. Adjust the intensity of your exercise until your heart rate is at the
proper level.
wrist pulse
Remember to follow these essentials:
Have your doctor review your training and diet programs.
Begin your training program slowly with realistic goals that have been set by you and your physician.
Warm up before you exercise and cool down after you work out.
Take your pulse periodically during your workout and strive to stay within a range of 60% (lower
intensity) to 90% (higher intensity) of your maximum heart rate zone. Start at the lower intensity, and
build up to higher intensity as you become more aerobically t.
If you feel dizzy or lightheaded you should slow down or stop exercising.
To determine if you are working out at the correct intensity, use a heart rate monitor or use the table
below. For effective aerobic exercise, your heart rate should be maintained at a level between 60%
and 90% of your maximum heart rate. If just starting an exercise program, work out at the low end of
your target heart rate zone. As your aerobic capacity improves, gradually increase the intensity of your
workout by increasing your heart rate.
CONDITIONING GUIDELINES
Target Heart Rate Zone Estimated by Age*
* For cardiorespiratory training benefits, the American College of Sports Medicine recommends
working out within a heart rate range of 55% to 90% of maximum heart rate. To predict the
maximum heart rate, the following formula was used: 220 - Age = predicted maximum heart rate
20 years
25 years
30 years
35 years
40 years
45 years
50 years
55 years
60 years
65 years
70 years
Average Maximum
Heart Rate 100%
Age
110-180 beats per minute
107-175 beats per minute
105-171 beats per minute
102-166 beats per minute
99-162 beats per minute
97-157 beats per minute
94-153 beats per minute
91-148 beats per minute
88-144 beats per minute
85-139 beats per minute
83-135 beats per minute
200 beats per minute
195 beats per minute
190 beats per minute
185 beats per minute
180 beats per minute
175 beats per minute
170 beats per minute
165 beats per minute
160 beats per minute
155 beats per minute
150 beats per minute
Target Heart Rate Zone
(55%-90% of Maximum Heart Rate)
12
WARM-UP and COOL-DOWN
Warm-Up
The purpose of warming up is to prepare your body for exercise and to minimize injuries.
Warm up for two to ve minutes before strength training or aerobic exercising. Perform activities that
raise your heart rate and warm the working muscles. Activities may include brisk walking, jogging,
jumping jacks, jump rope, and running in place
Stretching
Stretching while your muscles are warm after a proper warm-up and again after your
strength or aerobic training session is very important. Muscles stretch more easily at these times
because of their elevated temperature, which greatly reduces the risk of injury. Stretches should be held
for 15 to 30 seconds. Do not bounce.
Suggested Stretching Exercises
Remember to always check with your physician before starting any exercise program.
Cool-Down
The purpose of cooling down is to return the body to its normal, or near normal, resting
state at the end of each exercise session. A proper cool-down slowly lowers your heart rate and allows
blood to return to the heart. Your cool-down should include the stretches listed above and should be
completed after each strength training session.
Lower Body Stretch
Place feet shoulder-width
apart and lean forward.
Keep this position for 30
seconds using the body as a
natural weight to stretch the
backs of the legs.
DO NOT BOUNCE!
When the pull on the back of
the legs lessens, gradually
try a lower position.
Floor Stretch
While sitting on the oor,
open the legs as wide as
possible. Stretch the upper
body toward the knee on the
right leg by using your arms
to pull your chest to your
thighs. Hold this stretch 10
to 30 seconds.
DO NOT BOUNCE!
Do this stretch 10 times.
Repeat the stretch with the
left leg.
Bent Over Leg Stretch
Stand with feet shoulder-
width apart and lean forward
as illustrated. Using the
arms, gently pull the upper
body towards the right leg.
Let the head hang down.
DO NOT BOUNCE!
Hold the position a minimum
of 10 seconds. Repeat
pulling the upper body to
the left leg. Do this stretch
several times slowly.
Bent Torso Pulls
While sitting on the oor,
have legs apart, one leg
straight and one knee bent.
Pull the chest down to touch
the thigh on the leg that is
bent, and twist at the waist.
Hold this position at least 10
seconds. Repeat 10 times
on each side.
13
PRODUCT PARTS DRAWING
14
FRONT
BACK
PART# PART NAME QTY
PARTS LIST
15
1 Seat Cushion 1
2 Cushion Rail 2
3 Knee Cushion 2
4 Cushion Support Frame 1
5 Support Post 1
6 Handlebar Post 1
7 Foot Support 1
8 Ankle Support 1
9 Seat Adjustment 1
10 Foam Roll 2
11 Round Plug (25mm) 2
12 Endcap (50.8mm) 4
13 Hand Grip 2
15 Square Plug (20mm x 20mm) 4
16 Square Plug (45mm x 45mm) 1
17 Bolt, Hex Head (M10 x 1.5 x 65mm) 2
18 Bolt, Hex Head (M10 x 1.5 x 120mm) 1
19 Bolt, Hex Head (M10 x 1.5 x 75mm) 1
20 Bolt, Hex Head (M10 x 1.5 x 20mm) 4
21 Bolt, Hex Head (M10 x 1.5 x 140mm) 2
22 Bolt, Round Head (M6 x 1 x 34mm) 4
23 Nylock Nut (M10 x 1.5) 6
24 Washer (M10) 18
25 Spacer (ø12.7mm x ø10.7 x 10mm) 2
26 Long Spacer (ø12.7mm x ø10.7 x 51mm) 1
27 Square Plug (25.4mm x 25.4mm) 2
28 Caution Label 1
29 Wrench 1
30 Combination Wrench 1
31 Manual 1
32 Locking Pin 3
LIMITED WARRANTY
MODEL 20-2021
16
WARRANTY
Stamina Products, Inc. (“Stamina”) warrants to the original purchaser that this product will be free from
defects in materials and workmanship that arise under normal use, service, proper assembly and proper
operation in accordance with product warnings/instructions for a period of 90 days on the parts and ve
years on the frame from the date of the original purchase from an authorized retailer. THIS WARRANTY
SHALL NOT APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE,
ABUSE, MISUSE, ALTERATION OF ANY KIND OR TO ANY DEFECT OR CHANGE CAUSED BY
IMPROPER ASSEMBLY, REPAIR, REPLACEMENT, SUBSTITUTION OR USE WITH PARTS NOT
PROVIDED BY STAMINA. Commercial use includes use of product in athletic clubs, health clubs, spas,
gyms, and all other public or semipublic facilities whether or not the product’s use is in furtherance of a
prot making enterprise, and all other use which is not for personal purposes.
To implement this limited warranty, send a written notice stating your name, date, and place of purchase
and a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071,
Springeld Missouri, USA, 65801-1071, or email us at customer[email protected], or call us
at 1-800-375-7520. If the defect is covered under this limited warranty, you will be requested to return the
product or part to us for free repair or replacement at our option.
NO ACTION FOR BREACH OF THIS LIMITED WARRANTY MAY BE COMMENCED MORE
THAN ONE (1) YEAR AFTER THE DATE THE ALLEGED BREACH WAS OR SHOULD HAVE
BEEN DISCOVERED. NO ACTION FOR BREACH OF ANY IMPLIED WARRANTY (INCLUDING
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) MAY BE COMMENCED
MORE THAN ONE (1) YEAR AFTER DELIVERY OF THE PRODUCT TO THE PURCHASER. These
warranties are not transferable. IF ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE
WITH THIS LIMITED WARRANTY OR ANY IMPLIED WARRANTY, THE REMEDY OF REPAIR OR
REPLACEMENT IS THE EXCLUSIVE REMEDY. If any claim is made under this limited warranty or any
implied warranty, Stamina reserves the right to require the product to be returned for inspection, at the
purchaser’s expense, to Stamina’s premises in Springeld, Missouri. Return of the enclosed warranty
registration card is not required for warranty coverage, but is merely a way of establishing the date and
place of purchase.
Stamina SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF TIME,
INCONVENIENCE, COMMERCIAL LOSS OR ANY OTHER INDIRECT, CONSEQUENTIAL, SPECIAL
OR INCIDENTAL DAMAGES DUE TO BREACH OF THE ABOVE WARRANTY OR ANY IMPLIED
WARRANTY.
THIS LIMITED WARRANTY IS THE ONLY EXPRESS WARRANTY. NO ORAL OR WRITTEN
INFORMATION GIVEN BY STAMINA, ITS AGENTS OR EMPLOYEES, SHALL CREATE A WARRANTY
OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY. This warranty gives you specic legal
rights, and you may also have other legal rights which vary from state to state. ANY OTHER RIGHT
WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
The laws in some states aect the disclaimer or limitation of implied warranties and consequential and
incidental damages. If any such law is found applicable, the foregoing disclaimers and limitations of and
on implied warranties and consequential and incidental damages shall be deemed to be modied to the
extent necessary to comply with applicable law.
NOTES
17
Model Number: ...................................................................................... Serial Number: .............................................................................................
Product Name: ..................................................................................................................................................................................................................................
Place Purchased: ..............................................................................................................................................................................................................................
Date of Purchase: .................................................................................. Purchase Price: ............................................................................................
First Name: ............................................................................................ Last Name: ...................................................................................................
City: .................................................................. State: ................................................................ Zip Code: .................................................
Email Address: ....................................................................................... Phone #: ( ) ......................................................................................
Would you like to receive email information or special oers from Stamina Products?* ____Yes ____No
*If yes, be sure your email address is included above.
Stamina Products, Inc.
P.O. Box 1071
Springeld, MO 65801-1071
If there are missing or damaged parts, you can go to parts.staminaproducts.com and order those parts. If you have questions,
please contact customer care. Do not return the product. To order parts by mail, fill out the sheet below and fax it to
417-889-8064. The part will be mailed to your address.
Mr./Ms: ..............................................................................................................................................................................................................................................
Address: ........................................ ............................................................................................. Apt. #:..........................................................................
City: .................................................................. State: ................................................................ Zip Code: .................................................
IMPORTANT : We require your phone number to process the order!
Phone #: ( ) ................................................................................ Work Phone #: ( ) .............................................................................
Date of Purchase: ..................................................................................
Model #: ............................................................................................................................................................................................................................................
Purchased From: ..............................................................................................................................................................................................................................
IMPORTANT: Before lling out the portion below, make sure you have the correct information.
Refer to the parts list to make sure you're ordering the right parts!
Stamina Products, Inc.
P.O. Box 1071
Springeld, MO 65801-1071
Detach and Mail or Fax the Form Above
TO CONTACT CUSTOMER CARE
For your convenience, Stamina’s customer care representatives can be reached by email at customer.care@staminaproducts.
com or by phone at 1-800-375-7520 (in the U.S.). Our customer care representatives are available Monday through Thursday
from 7:30 a.m. until 5:00 p.m., and Friday 8:00 a.m. until 3 p.m. Central Time.
TO REGISTER YOUR PRODUCT
Would you like to recieve email information or special oers from Stamina Products? Register at contact.staminaproducts.com
TELEPHONE
CUSTOMER CARE
Tel: 1 (800) 375-7520
FAX
CUSTOMER CARE
Fax: (417) 889-8064
MAIL
STAMINA PRODUCTS, INC.
ATTN: Customer Care
P.O. Box 1071 Springeld, MO. 65801-1071
ONLINE
CUSTOMER CARE
customer[email protected]
www.staminaproducts.com
To enact your warranty, please register your product by going to register.staminaproducts.com. Please have your product model
number (printed on the cover of this owner’s manual) and the serial number (printed on the black and white sticker on your
product) ready.
If you don’t have internet access, you can call customer care at 1-800-375-7520, or ll out and mail the product registration form
below to Stamina Products, Inc.; P.O. Box 1071; Springeld, MO 65801-1071.
PRODUCT REGISTRATION FORM
TO ORDER PARTS
Detach and Mail or Fax the Form Below
PARTS ORDER FORM
PART # DESCRIPTION QUANTITY
1 Rear Unit Assembly 1
EXAMPLE:
