Technical Support and E-Warranty Certificate www.vevor.com/support
Electric slicer for fruit and vegetable
MODEL:SL-06/SL-08
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
MODEL:SL-06/SL-08
SL-06 SL-08
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
Electric slicer for fruit and
vegetable
- 2 -
Warning-To reduce the risk of injury, the user must read the
instructions manual carefully.
Indoor Use Only
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should be
followed, including the following.
1.READ ALL INSTRUCTIONS.
2.Unplug from the outlet when not in use, before putting on or taking
off parts, and before cleaning.
3.Please check that the specified supply voltage in the product is
consistent with the supply voltage(AC only).
4. This appliance can be used by children aged 8 years and above and
persons with reduced physical, sensory, or mental capabilities or lack of
experience and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a safe way and
understand the hazards involved.
5.Children shall not play with the appliance. Cleaning and user
maintenance shall not be done by children without supervision.
6.To protect against electrical hazards, do not put the Electric slicer for fruit
and vegetables in water or other liquids
7. Avoid contact with moving parts.
8. Do not operate the Electric slicer for fruit and vegetables or any other
electrical equipment with a damaged cord or plug or after the unit
malfunctions or is dropped or damaged in any manner. Return it to the
nearest authorized service facility for examination, repair, or adjustment.
9. Do not use outdoors. FOR HOUSEHOLD USE ONLY
10. Do not let the cord hang over the edge of the table or counter or touch
hot surfaces.
- 3 -
11. Put this instruction manual in a safe place. Do not discard.
12. If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent, or similarly qualified persons in order to avoid a hazard.
13. Electric Shock Danger! Non-professional personnel are forbidden to
repair the products; otherwise, it may result in electrical shock. When
failures happen, they should be repaired by qualified maintenance
personnel.
14. WARNING! It is strictly prohibited to put the main body of the machine
and the power cord into any liquid. The machine must be fully cool before
cleaning.
15. Do not place the product directly on the fire or near the source of fire.
Otherwise the product will be damaged or even result in danger. Once part
of the product is on fire, do not directly use water to extinguish the fire. Use
a wet cloth to cover the fire site.
16. When the plug is plugged into the socket, it must be plugged into the
end. Otherwise, it will cause the components to overheat and burn due to
poor contact.
17. Do not leave the product to work with no one watching. If the machine
is overheating, please stop working immediately and unplug the power.
SAVE THESE INSTRUCTIONS
CORRECT DISPOSAL
This product is subject to the provision of European Directive
2012/19/EU. The symbol showing a wheelie bin crossed
through indicates that the product requires separate refuse
collection in the European Union. This applies to the product
and all accessories marked with this symbol. Products marked
as such may not be discarded with normal domestic waste, but
must be taken to a collection point for recycling electrical and
electronic devices.
- 4 -
FCC Information
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment!
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1) This product may cause harmful interference.
2)This product must accept any interference received, including
interference that may cause undesired operation.
WARNING: Changes or modifications to this product not expressly
approved by the party. Responsible for compliance could void the user's
authority to operate the product.
Note: This product has been tested and found to comply with the limits for
a Class B digital device pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
This product generates, uses and can radiate radio frequency energy, and
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
product does cause harmful interference to radio or television reception,
which can be determined by turning the product off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures.
• Reorient or relocate the receiving antenna.
• Increase the distance between the product and the receiver.
• Connect the product to an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance.
- 5 -
Summarize
This product has a hand-integrated slicer, high efficiency, light structure,
and easy to disassemble and wash. Applicable to various places such as
shops, restaurants, stalls, milk tea shops, canteen, households and other
fruit and vegetable slice processing. Slice thickness adjustable. The cut
pieces are even and easy to see. Green environmental protection,
maintain the original flavor, welcomed by users.
- 6 -
1.Installation operation of the machine
Take out the machine, install the handle on the cutter head with a
screwdriver and fix the nut with an inner Hexagon wrench. Then the
machine base is sheathed with suction cup (stainless steel, Marble and
other smooth table can be directly with 6 small suction cups; wood and
other non-smooth table can be randomly equipped with screws fixed. The
slicing operation can be carried out after installation.
- 7 -
Easy Slice in three steps
Simple operation, everyone can use
- 8 -
2.Thickness adjustment
Put the food into the groove and try to cut it to see the thickness. If it is not
suitable, you can adjust the thickness. (1): Pull the outer ring of the
adjusting knob out, (2) gently turn the knob to turn left and right, In the
counter-clockwise direction to adjust the thickness; to the clockwise
direction to adjust the thickness, the knob card back to the card slot; the
thickness will not run. Pay attention to the feeling in your hand. If there is
any resistance to rotation, it means that it has been rotated to the end. Or
you'll wear out the adjusting thread.)
Spring assisted propulsion
- 9 -
The spring drives the material into the knife, saving time and effort to
prevent cutting hands
3.Step to replace spring
- 10 -
First, you need to remove the cutter head and then remove the tie rod tail
pentagram; the push plate can be removed to replace the spring. Replace
the spring, install the return groove on the push rod, fix it in place with the
pentagram, and install the cutter head. Lock the cutter head with the safety
buckle for normal use.
4.Cleaning
After slicing, the machine should be cleaned, the whole machine should be
cleaned, or the cutter head should be cleaned. After cleaning, it is
recommended to dry the water stains to keep the fuselage clean and
prevent rusting. (Note: Do not use dishwasher to clean cutter head and
fuselage)
5.Procedure of removing cutter head
( 1) Pull the buckle out and take off the safety buckle.
( 2) The cutter head can be washed, or the blade can be replaced by
drawing out the cutter head.
- 11 -
Note: If there is any technical change, please refer to the nameplate on the
product without further notice.
Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi
Shanghai
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD
NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim
Place, Rancho Cucamonga, CA 91730
- 12 -
Made In China
