HOTO Li-ion
Screwdriver-Lite.
1
2
4
3
1
01 Product Overview
Charging Port
Forward/Reverse rotation button
LED Indicator
Bit Holder
1
2
3
4
Please read this manual carefully before use, and retain it for future reference.
Thank you for purchasing the HOTO Li-ion Screwdriver-Lite.
2
02 How to Use
Forward/Reverse rotation button
Press level to turn in or tighten screws.
Press level to loosen or remove screws.
Indicator Status
If the battery level drops below 20% when
the screwdriver is in use, the indicator will
blink red 5 seconds quickly, and it will turn
off after the button is released.
When charging, the indicator will blink red.
When the battery is fully charged, the
indicator will stay white.
This screwdriver is equipped with a Micro USB universal charging
port, and a USB charging cable is included.
3
Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching outlets will reduce risk
of electric shock.
Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
Electrical safety
03 General Power Tool Safety Warnings
WARNING! Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Work Area Safety
Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
4
Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords increase the risk of
electric shock.
When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection.
Protective equipment such as a dust mask, non-skid safety shoes, hard
hat or hearing protection used for appropriate conditions will reduce
personal injuries.
Prevent unintentional starting. Ensure the switch is in the
off-position before connecting to power source and/or battery
pack, picking up or carrying the tool. Carrying power tools with your
finger on the switch or energising power tools that have the switch on
invites accidents.
Personal Safety
WARNING! Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
5
Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at
the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
Power Tool Use And Care
If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly
used. Use of dust collection can reduce dust-related hazards.
Do not let familiarity gained from frequent use of tools allow you
to become complacent and ignore tool safety principles. A careless
action can cause severe injury within a fraction of a second.
Remove any adjusting key or wrench before turning the power
tool on. A wrench or a key left attached to a rotating part of the power
tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your
hair and clothing away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
Disconnect the plug from the power source and/or remove the
battery pack, if detachable, from the power tool before making
6
Use power tools only with specifically designated battery packs.
Use of any other battery packs may create a risk of injury and fire.
Recharge only with the charger specified by the manufacturer.
A charger that is suitable for one type of battery pack may create a risk
of fire when used with another battery pack.
Battery tool use and care
any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power
tool accidentally.
Store idle power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these instructions
to operate the power tool. Power tools are dangerous in the hands of
untrained users.
Maintain power tools and accessories. Check for misalignment or
binding of moving parts, breakage of parts and any other
condition that may affect the power tool's operation. If damaged,
have the power tool repaired before use. Many accidents are caused
by poorly maintained power tools.
Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working conditions
and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and free from oil
and grease. Slippery handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpected situations.
7
When battery pack is not in use, keep it away from other metal
objects, like paper clips, coins, keys, nails, screws or other small
metal objects, that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns or a fire.
Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of
the power tool is maintained.
Never service damaged battery packs. Service of battery packs
should only be performed by the manufacturer or authorized service
providers.
Service
Do not use a battery pack or tool that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable behavior
resulting in fire, explosion or risk of injury.
Do not expose a battery pack or tool to fire or excessive temperature.
Exposure to fire or temperature above 130°C may cause explosion.
Follow all charging instructions and do not charge the battery
pack or tool outside the temperature range specified in the
instructions. Charging improperly or at temperatures outside the
specified range may damage the battery and increase the risk of fire.
Under abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
8
Hold the power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory or fasteners
may contact hidden wiring. Cutting accessory contacting a “live” wire
may make exposed metal parts of the power tool “live” and could give
the operator an electric shock.
Safety instructions for all operations
Never operate at higher speed than the maximum speed rating of
the drill bit. At higher speeds, the bit is likely to bend if allowed to rotate
freely without contacting the workpiece, resulting in personal injury.
Always start drilling at low speed and with the bit tip in contact
with the workpiece. At higher speeds, the bit is likely to bend if
allowed to rotate freely without contacting the workpiece, resulting in
personal injury.
Apply pressure only in direct line with the bit and do not apply
excessive pressure. Bits can bend causing breakage or loss of control,
resulting in personal injury.
Always wait until the power tool has come to a complete stop
before placing it down. The application tool can jam and cause you
to lose control of the power tool.
Secure the workpiece. A workpiece clamped with clamping devices or
in a vice is held more secure than by hand.
Additional safety information
Safety instructions when using long drill bits
9
Hold the power tool securely. When tightening and loosening screws
be prepared for temporarily high torque reactions.
In case of damage and improper use of the battery, vapours may
be emitted. The battery can set alight or explode. Ensure the area is
well ventilated and seek medical attention should you experience any
adverse effects. The vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuiting.
The battery can be damaged by pointed objects such as nails or
screwdrivers or by force applied externally. An internal short circuit
may occur, causing the battery to burn, smoke, explode or overheat.
Only use the battery with products from the manufacturer. This is
the only way in which you can protect the battery against dangerous
overload.
Protect the battery against heat, e.g. against continuous intense
sunlight, fire, dirt, water and moisture. There is a risk of explosion
and short-circuiting.
Switch the power tool off immediately if the application tool
becomes blocked. Be prepared for high torque reactions which cause
kickback. The application tool becomes blocked when it becomes
jammed in the workpiece or when the power tool becomes overloaded.
Use suitable detectors to determine if there are hidden supply lines
or contact the local utility company for assistance. Contact with
electric cables can cause fire and electrical shock. Damaging gas lines
can lead to explosion. Breaking water pipes causes property damage.
04 Specifications
Model：QWLSD007
Maximum Torque in Electric Mode: 3 N·m
Maximum Torque in Manual Mode: 8 N·m
Main Unit Net Weight: Approx.185g
Item Dimensions: 169×34×34 mm
Rated Voltage:3.6V
Rotation per Minute(Unloaded): 220r/min
Bit Size: C6.3×50mm
PH2/H4
Charging Time：<150min
Issue
Indicator blinking red when
the on/off switch is pressed
Bit cannot be installed
Battery won't charge
The machine doesn't work
after pressing the on/off switch
Low li-ion battery power Charge the battery
Charge the battery
Use an appropriate bit
No li-ion battery power
Bit size doesn't match
the size of the bit holder
Possible Causes Solution
Troubleshooting
10
Use the specified
charging cable; 5 V power
adapter needs to be used.
Check whether the
charging indicator is on
The USB cable isn't plugged
in or the included charging
cable isn't being used
Manufactured by: Shanghai HOTO Technology Co., Ltd.
Address: Building 45, No.50 Moganshan Road, Putuo District Shanghai,China
Hold the power tool securely. When tightening and loosening screws
be prepared for temporarily high torque reactions.
In case of damage and improper use of the battery, vapours may
be emitted. The battery can set alight or explode. Ensure the area is
well ventilated and seek medical attention should you experience any
adverse effects. The vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuiting.
The battery can be damaged by pointed objects such as nails or
screwdrivers or by force applied externally. An internal short circuit
may occur, causing the battery to burn, smoke, explode or overheat.
Only use the battery with products from the manufacturer. This is
the only way in which you can protect the battery against dangerous
overload.
Protect the battery against heat, e.g. against continuous intense
sunlight, fire, dirt, water and moisture. There is a risk of explosion
and short-circuiting.
11
DECLARATION OF CONFORMITY
EU Declaration of Conformity
We
Shanghai HOTO Technology Co., Ltd.
Declare that the product:
HOTO Li-ion Screwdriver-Lite/QWLSD007
Complies with the essential health and safety requirements of the following directives:
2014/30/EU Electromagnetic Compatibility directive References to the following
harmonized standard were made:
EN55014-1: 2017+A11:2020
EN55014-2: 2015
2011/65/EU+ (EU) 2015/863 Restrictions of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment
Authorised signatory and technical file holder:
Shanghai HOTO Technology Co., Ltd.
Building 45, No.50 Moganshan Road, Shanghai, China
