HOTO
PixelDrive Cordless
Screwdriver
Visit our website for more Cool Tools
( www.hototools.com )
Product Overview
1
1
2
2
3
3
4
5
Storage Case Section 1
Storage Case Section 2
Storage Case Section 3
Bits
Cordless Screwdriver
Thank you for purchasing the HOTO PixelDrive Cordless
Screwdriver.
Please read this manual carefully before use, and keep it
for future reference.
4
5
1
1
2
3
4
5
6
Bit Holder
Work Light
Torque Regulating Ring
LED Display
Forward/Reverse Button
USB-C Charging Port
Illustrations of the product and its accessories and user
interfaces in this manual are for reference only. Due to
product updates and upgrades, the actual product may
differ slightly from illustrations. Product specifications
are subject to change without prior notice.
2
1
2
3
4
5
6
How to Use
Using the Storage Case
The bits and the screwdriver are stored in the storage
case. The case consists of three sections, connected by a
twist-lock mechanism.
Rotate counterclockwise and pull to detach a section;
rotate clockwise and press to attach a section.
Using Bits
Bits are magnetically stored in the base. To use a bit,
remove it from the storage case and insert it into the bit
holder.
Once inserted, the bit becomes magnetized in the central
magnetization zone. The magnetic force is transferrable,
allowing most screws to be held magnetically.
3
Regulating Torque Levels
Torque Level Information
Rotate the torque regulating ring to switch among 6 levels
and one OFF position.
The torque level is shown on the LED display.
Rotate clockwise to increase torque and counterclockwise
to decrease.
0.5N·m（4.5lb·in）
1.0N·m（10lb·in）
2.0N·m（20lb·in）
3.0N·m（30lb·in）
4.0N·m（40lb·in）
6.0N·m（50lb·in）
V
V
V
OFF
4
Changing Torque Unit
Press and hold the Forward/Reverse Button together for at
least 3 secs to change the torque unit (lb·in or N·m)
shown on the LED display.
Forward/Reverse Button
Press the ∨ side to drive in or tighten screws.
Press the ∧ side to loosen or remove screws.
Work Light
The brightness of the work light is automatically adjusted
via an onboard chip to suit various environments.
Hold the Forward/Reverse Button to keep the work light on
to provide illumination during operation.
3 S
5
Speed Control
The speed control button offers two speed levels.
Switch the speed by lightly press the button to use at
80RPM, or press the button with a little bit force to use at
200RPM.
Screen Display
The LED display shows both torque level and battery level.
Torque Level
When the torque regulating ring is rotated, the display
shows torque level changes.
When the Forward/Reverse Button is pressed and held for
3 seconds, the display shows torque unit changes
(between lb·m and N·m).
I
II
6
Battery Level
When the screwdriver is activated via the Forward/Reverse
Button, the display shows the battery level.
• When the battery level is at or below 20% but still above
1%, a lightning icon will flash to indicate low battery.
• When the battery level drops to 1% and the screwdriver
cannot be turned on, the lightning icon and the battery
level animation will flash at the same rate.
• When the battery level is at 0, the display will shut off.
• During charging, when the battery level is ≤ 20%, the
lightning icon flashes slowly.
• During charging, when the battery level is between 20%
and 100%, the lightning icon breathes.
• During charging, when the battery level reaches 100%,
the lightning icon stays on and displays a "GO!"
animation.
7
Charging
• The product is provided with a universal USB-C charging
port and a USB-C charging cable. Charger is not
included. Please charge the product with a DC charger at
an output of 5V and a current between 500mA and
2,000mA.
• The charging time is approximately 3 hours, depending
on the charger used. Please do not use the product
during charging, this product can't be turned on while
charging.
• Charge the product promptly when battery is low.
• Avoid overcharging or over-discharging the battery to
prevent damage.
8
Precautions
• Rotating the storage case sections too quickly when
attaching them may pinch your fingers. Do not insert
fingers into illustrated areas when detaching or attaching
the case sections.
• Before using this product, ensure the power supply to
any electrical parts has been detached. The product is
not a toy. Keep it out of reach of children. The product is
intended for use by individuals aged 16 or above only.
• The torque values listed in product specifications apply
to the screwdriver only. The product is intended for
precision maintenance tasks. During operation, please
use a bit that matches the screw. During manual
operation, avoid applying excessive force to prevent
unnecessary damage to the screw or bit.
9
Specification
Information
Product Name: HOTO PixelDrive Cordless Screwdriver
Product Model: QWLSD014
Item Dimensions: Φ38 X 198mm
Net Weight: Approx.317g
Nominal Capacity: 2000mAh
Charging Time: Approx.180min
Nominal Voltage: 3.6V
Input Parameter: 5V 1A
Maximum Torque in Electric
Mode: 0.5-6.0 N.m
Maximum Torque in Manual
Mode: 8.0 N.m
No-Load Speed: 80/200RPM
Chuck Size: C6.3
The declared vibration total value(s) and the declared
noise emission value(s) have been measured in
accordance with a standard test method and may be used
for comparing
one tool with another; The declared vibration total value
(s) and the declared noise emission value(s) may also be
used in a preliminary assessment of exposure.
The vibration and noise emissions during actual use of the
power tool can differ from the declared values depending
on the ways in which the tool is used especially what kind
10
of workpiece is processed; and It is necessary to identify
safety measures to protect the operator that are based on
an estimation of exposure in the actual conditions of use
(taking account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
Declaration of the noise emission values according to EN
62841
(considered uncertainty 5 dB (A))
Sound pressure level:6/dB(A)
Sound power level: 78dB(A)
Declaration of the vibration emission according to EN
62841 (considered uncertainty 1.5 m/s3): 1.3 m/s
All products bearing this symbol are waste
electrical and electronic equipment(WEEE as in
directive 2012/19/EU)which should not be mixed
with unsorted household waste. Instead, you should
protect human health and the environment by handing
over your waste equipment to a designated collection
point for the recycling of waste electrical and electronic
equipment, appointed by the government or local authori-
ties. Correct disposal and recycling will help prevent
potential negative consequences to the environment and
human health. Please contact the installer or local authori-
ties for more information about the location as well as
terms and conditions of such collection points.
11
12
Troubleshooting
Fault Cause Solution
Device stops
rotating
during use
Let the device
cool down
Device is operating
under heavy load
continuously,
triggering overheat
protection or low
voltage protection
Charging cable is
not properly
connected
Reconnect the
charging cable
Unable to
turn on
Out of battery
Please charge
the equipment in
time.
Unable to
install
accessories
Accessory size
does not match the
tool head
Use the accessories
provided in the box,
or accessories of
the correct size
Unable to
charge
The packaging materials are recyclable. Please
dispose of packaging in an environmentally
friendly manner.
Notes for packaging
EC REP
HOTO EUROPE AB
Pumpgatan 1, 417 55 GÖTEBORG,
Sweden
13
This supplier’s declaration of conformity is hereby for
We declare that the above mentioned device has been
tested
and found in compliance with CFR 47 Part 15 Regulation.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
Product: HOTO PixelDrive Cordless Screwdriver
Product model: QWLSD014
Brand/Trade: HOTO
We Shanghai HOTO Technology Co., Ltd., hereby,
declares that this equipment is in compliance with
the applicable Directives and European Norms, and
amendments.
Manufacturer: Shanghai HOTO Technology Co., Ltd.
Address: Building 45, No. 50, Moganshan Road, Shanghai, China
14
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
Representative of Responsible Party for SDoC
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
Company: HOTO (US) TECHNOLOGY CO LTD
Address: 919 North Market Street, Suite 950,
Wilmington DE 19801
Country: U.S.A.
Customer Service(US): +1 855-577-2659
Mon-Fri 9:00am-5:00pm(CST)
15
DECLARATION OF CONFORMITY
EU Declaration of Conformity
We
Shanghai HOTO Technology Co., Ltd.
Declare that the product:
HOTO PixelDrive Cordless Screwdriver /
QWLSD014
Complies with the essential health and safety requirements of
the following directives:
2014/30/EU Electromagnetic Compatibility directive References
to the following harmonized standard were made:
EN IEC 55014-1:2021
EN IEC 55014-2:2021
EN IEC 61000-3-2:2019+A2:2024
EN 61000-3-3:2013+A2:2021
2011/65/EU+ (EU) 2015/863 Restrictions of the Use of Certain
Hazardous Substances in Electrical and Electronic Equipment
Authorised signatory and technical file holder:
Shanghai HOTO Technology Co., Ltd.
Building 45, No.50 Moganshan Road, Shanghai, China
