Usage
Fit the calf part of the leg sleeve
to the calf and fasten it
Fit the thigh part of the leg sleeve
to the thigh and fasten it
Move the legs to make sure the leg
sleeves are tied in the right place
Insert the tube connector into
the corresponding I of the host
Insert the power plug into the
corresponding socket of the host
Plug the power adapter
into the power source
Press the power button
to start working
Stick the leg cover and
the foot part on foot
Put the leg into the correct foot cover.
The R on the foot cover represents
the right leg while the L
represents the left leg.
ON/OFF
Safety Precautions
Thank you for purchasing our air compression leg
massager with heat. Please read the instruction
manual carefully before use to ensure correct operation.
Danger
Notes
Warnings & Suggestions
Air Compression Leg Massager with Heat
LY-670C
If you have any of the following conditions, please consult
your doctor before using.
1. Pregnant women or shortly after childbirth
2. Heart disease, implanted cardiac pacemaker
3. The bone is fragile or damaged
4. Suffer from malignant tumor
5. Skin infections, red and swollen skin, burns, etc.
1.People with physical disabilities, sensory or nerve defects,
or lack of experience and common sense (including
children) who do not have a guardian to supervise or guide
the use of this massager, please do not use it. Please
supervise children and make sure that they will not play
it as toys.
2.It is forbidden to use the voltage outside the product
requirements.
3.It is forbidden for non-professional repair technicians to
disassemble and repair this massager.
4.It is forbidden to use it in a humid place or when the
product penetrates into water or any other liquids.
5.Please do not place it in any flammable, explosive or
chemical place.
6.Please do not use sharp objects to damage the massager
or its parts.
7. Please do not use it in a high-temperature environment.
8. Please do not stand or walk around during use.
9. Please do not use it while sleeping.
10. Please do not pull the power cord when unplug
the adapter.
11. Please do not plug or unplug the adapter or air pipe
connector with your wet hands.
1. The massager has a heating surface, so people who are
not sensitive to heat must pay attention to it while using.
2. If power cord is damaged, it must be replaced by
professionals from manufacturer, maintenance department
or similar departments to avoid danger.
3. If you feel unwell or any abnormalities during use, please
stop using immediately.
4. It is suggested that each use time should not exceed 15
minutes. If continue using it, please let the massager stop
for 30 minutes before reusing.
This is the original instruction, please read all manual
instructions carefully before operating. VEVOR reserves a
clear interpretation of our user manual. The appearance of
the product shall be subject to the product you received.
Please forgive us that we won't inform you again if there
are any technology or software updates on our product.
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain
tools with us compared to the major top brands and does not necessarily
mean to cover all categories of tools offered by us. You are kindly
reminded to verify carefully when you are placing an order with us if you
are actually saving half in comparison with the top major brands.
Have product questions? Need technical support?
Please feel free to contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!�
Description
1. Foot cover
2. Heating function on toe
3. Adapter
4. Tube
5. Groove
6. Power button
7. Heat button
8. Pressure button
9. Mode button
10. Panel
1
2
3
10
6
4
5
9
8
7
Instruction
Cleaning & Maintenance
Please remember to turn off the power before cleaning.
If you encounter problems during use, please refer to
the following tips and possible solutions.
Troubleshooting
Problem
Cause
Possible Solution
Cannot heat
The tube plug is
not inserted
tightly into the
controller.
Firmly insert the tube
connector into the
controller.
Specification
Product name: air compression leg massager with heat
Model: LY-670D
Rated voltage: 12V
Rated power: 24W
Feature & Operation
Heating function: low or high
Pressing, kneading or shiatsu
Adjustable pressure: weak,
medium or strong
Turn on / off power
Heat
Mode
Pressure
Power
Pressure
Heat
ON/OFF
Mode
Pattern Button
Prevent the tube
frombending
Bent tube
Uneven
pressure on
the left and
right legs
Automatically
turn off
The 15-minute
time set by the
automatic timer
has expired.
Turn on the
massager again.
Problem
Cause
Possible Solution
Cannot heat
The tube plug is
not inserted
tightly into the
controller.
Firmly insert the tube
connector into the
controller.
Prevent the tube
frombending
Bent tube
Uneven
pressure on
the left and
right legs
Automatically
turn off
The 15-minute
time set by the
automatic timer
has expired.
Turn on the
massager again.
Please clean the massager with a slightly damp towel
and then dry it with a soft cloth.
Please do not use detergent, cleaning brush, gasoline,
kerosene,glass cleaner or thinner to clean the massager.
Please store the massager in its original box or in a safe,
dry and ventilated place to avoid moisture or direct
sunlight after cleaning.
This massager is specially designed and manufactured
withoutmaintenance or regular lubrication.
1. Short press the power button to turn on the massager.
The default is to enter the pressing mode with weak
pressure.
2. Short press the heat button to turn on low temperature
heating, then press the heat button to turn on high
temperature heating, and then press the heat button to
turn off the heating functionand so on.
3. Short press the mode button. The mode will switch
between pressing mode, kneading mode and shiatsu
mode.
4. Short press the pressure button. The pressure will
switch between weak, medium and strong.
5. Please press the power button to stop massaging after
using.
6. The massager is set a default timer of 15 minutes. It
will be automatically turned off after 15 minutes and then
enter the standby state.
Technical Support and E-Warranty Certificate
www.vevor.com/support
Zhejiang Luyao Electronics Technology Co.,Ltd
Wei 1st Road,Mechanical Park,Wanquan Light
Industrial Base, Pingyang County, Wenzhou
City, Zhejiang Province,325409,China
