Technical Support and E-Warranty Certificate www.vevor.com/support
COFFEE MAKER
MODEL:CM8501TE-UL
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
MODEL:CM8501TE-UL
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
COFFEE MAKER
- 2 -
Warning-To reduce the risk of injury, user must read
instructions manual carefully.
IMPORTANT SAFEGUARDS
Before using the electrical appliance, the following basic precautions should
always be followed including the following:
1. Read all instructions.
2. Before using check that the voltage of wall outlet corresponds to rated voltage
marked on the rating plate.
3. This appliance has been incorporated with a grounded plug. Please ensure the
wall outlet in your house is well earthed.
4. To protect against fire, electric shock and injury to persons do not immerse cord,
plug, in water or other liquid.
5. Remove the plug from the wall outlet before cleaning and when not in use.
Allow the appliance to cool down completely before removing, attaching
components, or cleaning.
6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or is dropped or damaged in any manner. Return
appliance to the nearest authorized service facility for examination, repair or
electrical or mechanical adjustment.
7. The use of accessory attachments not recommended by the appliance
manufacturer may result in fire, electric shock or injury to persons.
8. Place appliance on flat surface or table, do not hang power cord over the edge
of table or counter.
9. Ensure the power cord does not touch the hot surface of the appliance.
10. Do not place the coffee machine on a hot surface or beside the fire to avoid
damage.
11. To disconnect, remove plug from wall outlet. Always hold the plug. But never
pull the cord.
12. Do not use appliance for other than intended use and place it in a dry
environment.
13. Close supervision is necessary when your appliance is being used near
children.
- 3 -
14. Be careful not to get burned by the steam.
15. Do not touch the hot surface of appliance (such as steam wand, and the steel
mesh just boiling). Use handle or knobs.
16. Do not let the coffee maker operate without water.
17. Do not remove the metal funnel when appliance in brewing coffee or making
steam.
18. Connect plug to wall outlet before using and turn any switch off before plug is
removed from wall outlet.
19. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use
of the appliances by a person responsible for their safety.
20. Children should be supervised to ensure that they do not play with the
appliance.
21. This appliance is intended to be used in household and similar applications
such as:
– staff kitchen areas in shops, offices and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments.
22. Do not use outdoors.
23. Save these instructions.
24. If you do not use the product for a long time, you need to turn on the power
and then release steam for 3 minutes before leaving this product.
25. If you cut off power during steam release, residual heat will make product
continue to release steam for a length of time, the product will stop releasing
steam immediately once you turn off steam knob.
KNOW YOUR COFFEE MAKER
A. Control panel（Power button 1-cup coffee button 2-cup coffee button Steam
button）
B. 2 cups Steel mesh C. Metal funnel
D. Funnel handle E. Float cover
F. Removable cup shelf G. Drip tray
- 4 -
H. Steam control knob I. Water tank handle
J. Water tank cover K. Water tank
L. Steam wand M. Steam conduit handle
N. Froth nozzle O. Measuring spoon
P. 1 cup Steel mesh
BEFORE THE FIRST USE
To ensure the first cup of coffee tastes excellent, you should rinse the coffee maker
with warm water as follows:
1. Open water tank cover, fill water into water tank, water level should not exceed
the “MAX” mark in water tank. Then replace the water tank cover.
Note: the appliance is supplied with a detachable water tank for easy cleaning, you can
fill water tank with water first, and then attach water tank into the appliance.
2. Set steel mesh into metal funnel (no coffee in steel mesh), make sure the tube
on the funnel aligns with groove in the appliance, then insert the funnel into the
appliance from the “ ” position, and fix them into coffee maker firmly by turning it
anticlockwise until it is at the “ ” position.
3. Place an jug on removable cup shelf. Make sure steam control knob is on the
OFF position.
- 5 -
4. Connect into power source, press power button, power indicator is illuminated ,
The indicators of 1- cup coffee button, 2-cup coffee button and steam button flash,
the machine begins preheating, after all indicators are solidly on, the preheating is
completed
Note: if preheating is not completed yet, press 1-cup coffee button, 2-cup coffee
button or manual coffee button, the pump does not work; if you want to make
steam, press the steam button.
5. Press 2-cup coffee button, the unit will pump water for about 25s, pour out
water in the cup then clean them thoroughly, now the appliance is ready for making
coffee.
Note: There may be noise when pumping water for the first time, it is normal that
the appliance is releasing the air inside. After about 20s, the noise will disappear.
Note: Before the first use,because there is no water in the boiler,the button
indicator will flash to alarm quickly.Press the button of the 2-cup coffee button until
the pump stops working and the product stops to alarm,and the coffee brewing
operation can be started.
PREHEATING
To make a cup of good hot Espresso coffee, we recommend you should preheat
the appliance before making coffee, including metal funnel, steel mesh and cup,
so that the coffee flavour can not be influenced by cold parts.
1. Remove detachable water tank and open water tank cover to fill it with desired
water, the water level should not exceed the “MAX” mark in the tank. Then replace
water tank
2. Set steel mesh into metal funnel, make sure the tube on the funnel aligns with
groove in the appliance, then insert the funnel into the appliance from the “ ”
position, and fix them into coffee maker firmly by turning it anticlockwise until it is at
the “ ” position.
3. Place an espresso cup on removable cup shelf.
4. Then connect appliance to power supply. Make sure steam control knob is on
the OFF position.
5. Press power button, power indicator is illuminated , The indicators of 1- cup
coffee button, 2-cup coffee button flash, the machine begins preheating, after all
indicators are solidly on, it means that preheating is completed, press 2-cup coffee
- 6 -
button, the machine pumps water, when there is water flowing out, press this
coffee button again to stop pumping water immediately. The purpose of this step is
to pump the water of water tank into boiler.
6. When coffee button indicator is illuminated, it indicates the preheating is finished.
MAKE ESPRESSO
1. Remove funnel by turning it clockwise. Add ground coffee into steel mesh with
measuring spoon, a spoon of ground coffee powder can make about a cup of
top-grade coffee, then press ground coffee powder tightly with the tamper.
2. Set steel mesh into metal funnel, make sure the tube on the funnel aligns with
groove in the appliance, then insert the funnel into the appliance from the “ ”
position, and fix them into coffee maker firmly by turning it anticlockwise until it is at
the “ ” position.
3. Place a cup on removable cup shelf.
4. After preheating is completed, press 1-cup or 2-cup coffee button, the product
will start brewing, working time for 1-cup coffee is 15 seconds and 25 seconds for
2-cup coffee. working time is Max 90s, unit will automatically stop working if no any
operation within 90s.
CUP OF AMOUNT
Press and hold the 1-cup button for 3 seconds, and the 1-cup button flashes;
entering the setting mode, press the 1-cup button again to start dispensing coffee;
when the specified time is reached, press the 1-cup button to complete the setting,
which the unit can memorize. The working duration for a 1-cup coffee can be set
up to 45 seconds. If the working duration for 1-cup coffee is set, the working
duration for 2-cup coffee will be automatically updated to 2 times that for 1-cup
coffee. The working duration for 2-cup coffee can be set up to 90s; if the working
duration for 2-cup coffee is set, the working duration for 1-cup coffee will be
automatically updated to half for 2-cup coffee.
WARNING: Do not leave the coffee maker unattended while making coffee; you
need to operate it manually sometimes!
1. 1. After making coffee, turn the metal funnel out clockwise, then pour coffee
residue out with steel mesh pressed by the press bar.
- 7 -
2. Let them cool down completely, then rinse under running water.
MAKE HOT WATER
When the preheating is finished, the coffee indicator lights up solidly. Then press
the 2-cup coffee button, and the water pump starts to pump water. Turn the knob to
“ ” position and then hot water will flow out of the steam pipe. To stop making
hot water, press the coffee switch again and Turn the knob to “ ” position . Hot
water is used for warming cup, making tea or cooling down the appliance.
Please refer to the operation described in the section of “Make ESPRESSO” when
need to adjust the working time for making hot water.
MAKE CAPPUCCINO/FROTHED MILK
You get a cup of cappuccino when you top up a cup of espresso with frothed milk.
Method:
1. Prepare espresso first with container big enough according to the part “MAKE
ESPRESSO COFFEE”, make sure that the steam control knob is at the “o”
position.
2. Press the steam switch selector , the lamp in the coffee switch will be off, The
indicators of steam button flash, the machine begins preheating, after the indicator
of steam is solidly on, it means that preheating is completed,
3. Fill a jug with about 100 ml of milk for each cappuccino to be prepared, you are
recommended to use whole milk at refrigerator temperature (not hot!).
Note: In choosing the size of jug, it is recommend the diameter is not less than
70±5mm, and bear in mind that the milk increases in volume by 2 times, make
sure the height of jug is enough.
4. Insert the frothing device into the milk about two centimeters; turn the steam
control knob slowly anticlockwise; steam will come out from the frothing device.
Froth milk in the way, moving the vessel from up to down.
Note: Never turn the steam control button rapidly, as the steam will accumulate
rapidly in short time which may increase the potential of the risk of explosion.
5. When the required purpose is reached, you can turn the steam control knob to
“ ” position.
Note: Clean steam outlet with wet sponge immediately after steam stops
- 8 -
generating, but care not to hurt!
6. Pour the frothed milk into the espresso prepared, now the cappuccino is ready.
Sweeten to taste and if desired, sprinkle the froth with a little cocoa powder.
7. Press the Power switch to cut the power source off. All indicators will be
extinguished.
WARNING: After finish the “Steam” function, press the coffee switch, if the coffee
indicator and steam indicator blink fast, it means that the temperature of the
appliance is too high and the appliance needs to be turned off and have a rest for
more than 5 minutes, or you can activate the “Hot water” function to cool down the
appliance. And the water pump will stop pumping water automatically if the
temperature is normal. And the coffee will be burnt and there will be overflow at the
funnel if the appliance brew coffee directly without being cooled down.
AUTOMATIC POWER OFF FUNCTION
If there is no any operation within 25 minutes, the unit will power off automatically.
FACTORY RESET
After finish preheating, hold and press double cup coffee switch and steam switch
for 3 seconds at the same time, and their corresponding indicators will blink for 3
times, then the factory reset is finished.
CLEANING AND MAINTENANCE:
1. Cut off power source and let the coffee maker cool down completely before
cleaning.
2. Clean housing of coffee maker with moisture-proof sponge often and clean
water tank, drip tray and removable shelf regularly then dry them.
3. Note: Do not clean with alcohol or solvent cleanser. Never immerse the housing
in water for cleaning.
4. Detach the metal funnel by turning it clockwise, get rid of coffee residue inside,
then you can clean it with cleanser, but at last you must rinse with clear water.
5. Clean all the attachments in the water and dry thoroughly.
- 9 -
CLEANING MINERAL DEPOSITS
1. To ensure your appliance can operate efficiently, the internal piping is clean and
the peak flavor of coffee, it is suggested you clean the mineral deposits left every
2-3 months.
2. Fill the water tank with water and descaler to the MAX level (the proportion of
water and descaler is 4:1, details refer to the instruction of descaler.) Please use
“household descaler”.
3. According to the program of preheating, put the portafilter (no coffee powder
inside) and jug in place.
4. Brew water per section “PREHEATING”.
5. When preheating is finished, press the coffee button and make two cups of
coffee (about 2 Oz).
6. Press the steam button. Wait until the indicator light of the steam button
illuminates solidly. Turn the steam knob anticlockwise for 2 minutes (Place a cup
under the steam wand to collect the water.) and then turn back to off position “ ”
to stop making steam. Press the on/off button to turn off the unit . Let the descalers
deposit in the unit at least 15 minutes.
7. Restart the unit and repeat the steps of 4-6 at least 3 times.
8. Press the on/off button. When preheating is finished, Press the coffee button to
brew until no descaler is left.
9. Fill the water tank with tap water in the MAX level, repeat the steps of 4-6 for 3
times (it is not necessary to wait 15 minutes in step of 6), and then brew until no
water is left in the tank.
10. Repeat the step of 9 at least 3 times to make sure the piping is clean.
TROUBLE SHOOTING
Symptom
Cause
Corrections
The metal parts
in the tank have
rust.
The descaler is not
recommended type. It
may corrode the metal
parts in the tank.
Use the descaler recommended by
manufacturer.
- 10 -
Water leaks from
the bottom of
coffee maker.
There is much water in the
drip tray.
Please clean the drip tray.
The coffee maker is
malfunction.
Please contact with the authorized
service facility for repairing.
Water leaks out
of outer side of
filter.
There is some coffee
powder on filter edge.
Get rid of them.
Acid (vinegar)
taste exists in
Espresso coffee.
No clean correctly after
cleaning mineral deposits.
Clean coffee maker per the content in
“before the first use” for several times.
The coffee powder is
stored in a hot, wet place
for a long time. The coffee
powder turns bad.
Please use fresh coffee powder, or
store unused coffee powder in a cool,
dry place. After opening a package of
coffee powder, reseal it tightly and
store it in a refrigerator to maintain its
freshness.
The coffee maker
cannot work any
more.
The power outlet is not
plugged well.
Plug the power cord into a wall outlet
correctly, if the appliance still does not
work, please contact with the
authorized service facility for repairing.
The steam
cannot froth.
The steam ready indicator
is not illuminated.
Only after the steam ready indicator is
illuminated, the steam can be used to
froth.
The container is too big or
the shape is not fit.
Use high and narrow cup.
You have used skimmed
milk
Use whole milk or half-skimmed milk
Made In China
