D-Link SoundLink Flex Portable Bluetooth Speaker 2nd Gen User Manual

SOUNDLINK FLEX PORTABLE SPEAKER (2

GEN)

IMPORTANT SAFETY INSTRUCTIONS

ENG

Please read and keep all safety and use instructions.

Bose Corporation hereby declares that this product is in compliance with the essential requirements

and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive

requirements. The complete declaration of conformity can be found at: www.Bose.com/compliancewww.Bose.com/compliance

This product conforms to all applicable Electromagnetic Compatibility Regulations 2016 and all other

applicable UK regulations. The complete declaration of conformity can be found at:

www.Bose.com/compliancewww.Bose.com/compliance

Bose Corporation hereby declares that this product is in compliance with the essential requirements per Radio

Equipment Regulations 2017 and all applicable UK regulations. The complete declaration of conformity can be

found at: www.Bose.com/compliancewww.Bose.com/compliance

Important Safety Instructions

If the speaker is exposed to salt or chlorinated water, gently rinse with fresh water following the exposure to

remove residue. Make sure the connector port is fully dried out before charging.

Clean only with a dry cloth or water dampened cloth. Do not use cleaning products.

Only use aachments/accessories specified by the manufacturer.

Refer all servicing to qualified personnel. Servicing is required when the apparatus does not operate normally,

or has been physically damaged.

WARNINGS/CAUTIONS

Contains small parts which may be a choking hazard. Not suitable for children under age 3.

This product contains magnetic material. Consult your physician on whether this might aect your

implantable medical device.

• Keep the product away from fire and heat sources. Do NOT place naked flame sources, such as lighted

candles, on or near the product.

• Do NOT make unauthorized alterations to this product.

• Use this product only with an agency- approved LPS power supply that meets local regulatory requirements

(e.g., UL, CSA, VDE, CCC).

• The baery provided with this product may present a risk of fire, explosion or chemical burn if mishandled,

incorrectly replaced or replaced with an incorrect type.

• Do not expose products containing baeries to excessive heat (e.g. from storage in direct sunlight, fire or

the like).

• If the baery leaks, do not allow the liquid to come in contact with the skin or eyes. If contact is made, seek

medical advice.

• The product label is located on the back of the product.

REGULATORY AND LEGAL INFORMATION

ENG

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving product or antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Bose Corporation could void the user’s authority to

operate this equipment.

This device complies with part 15 of the FCC Rules and with ISED Canada’s license-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

This device complies with FCC and ISED Canada radiation exposure limits set forth for the general population.

This transmier must not be co-located or operating in conjunction with any other antenna or transmier.

CAN ICES-3(B)/NMB-3(B)

For Europe: Frequency band of operation 2400 to 2483.5 MHz. | Maximum transmit power less than 20

dBm EIRP.

Maximum transmit power is below regulatory limits such that SAR testing is not necessary and exempt per

applicable regulations.

This symbol means the product must not be discarded as household waste, and should be delivered to

an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural

resources, human health and the environment. For more information on disposal and recycling of this

product, contact your local municipality, disposal service, or the shop where you bought this product.

Low-power Radio-frequency Devices Technical Regulations: Without permission granted by the NCC, any

company, enterprise, or user is not allowed to change frequency, enhance transmiing power or alter original

characteristic as well as performance to a approved low power radio-frequency devices. The low power

radio-frequency devices shall not influence aircraft security and interfere legal communications; If found,

the user shall cease operating immediately until no interference is achieved. The said legal communications

means radio communications is operated in compliance with the Telecommunications Management Act. The

low power radio-frequency devices must be susceptible with the interference from legal communications or

ISM radio wave radiated devices. The low power radio-frequency devices must be susceptible with the

interference from legal communications or ISM radio wave radiated devices.

DON’T aempt to remove the rechargeable lithium-ion baery from this product. Contact your local Bose

retailer or other qualified professional for recycling and disposal.

Please dispose of used baeries properly, following local regulations. Do not incinerate.

REGULATORY AND LEGAL INFORMATION

ENG

Names and Contents of Toxic or Hazardous Substances or Elements

Toxic or Hazardous Substances and Elements

Part Name

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

(CR(VI))

Polybrominated

Biphenyl

(PBB)

Polybrominated

diphenylether

(PBDE)

PCBs X O O O O O

Metal Parts X O O O O O

Plastic Parts O O O O O O

Speakers X O O O O O

Cables X O O O O O

This table is prepared in accordance with the provisions of SJ/T 11364.

O: Indicates that this toxic or hazardous substance contained in all of the homogeneous

materials for this part is below the limit requirement of GB/T 26572.

X: Indicates that this toxic or hazardous substance contained in at least one of the

homogeneous materials used for this part is above the limit requirement of

GB/T 26572.

Equipment name: Bluetooth Speaker Type designation: 442591

Restricted substances and its chemical symbols

Unit

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

chromium

(Cr

)

Polybrominated

biphenyls (PBB)

Polybrominated

diphenyl ethers

(PBDE)

PCBs —

b b b b b

Metal Parts —

b b b b b

Plastic Parts

b b b b b b

Speakers —

b b b b b

Cables —

b b b b b

Note 1: “b” indicates that the percentage content of the restricted substance does not exceed the

percentage of reference value of presence.

Note 2: The “−” indicates that the restricted substance corresponds to the exemption.

Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “4” is 2014

or 2024.

Importers: Bose Electronics (Shanghai) Company Limited, Level 6, Tower D, No. 2337 Gudai Rd. Minhang

District, Shanghai 201100 | Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands | Bose de

México S. de R.L. de C.V., Avenida Prado Sur #150, Piso 2, Interior 222 y 223, Colonia Lomas de Chapultepec V

Sección, Miguel Hidalgo, Ciudad de México, C.P. 11000 Phone Number: +5255 (5202) 3545 | Bose Limited (H.K.),

7F., No.2, Sec. 3, Minsheng E. Road, Zhongshan Dist. Taipei City 10480, Phone Number: +886-2-2514 7676 |

Bose Limited, Bose House, Quayside Chatham Maritime, Chatham, Kent, ME4 4QZ, United Kingdom

Input Rating: 5V p, 1.5A

Model: 442591. The CMIIT ID is located on the back of the speaker.

This product is covered by a limited warranty from Bose, available at

worldwide.Bose.com/Warrantyworldwide.Bose.com/Warranty

License Disclosures: To view the license disclosures that apply to the third-party software packages included

as components of the Bose SoundLink Flex Portable Speaker (2

Gen), use the Bose app. You can access this

information from the Seings menu.

REGULATORY AND LEGAL INFORMATION

ENG

Apple, the Apple logo, iPad, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.

App Store is a service mark of Apple Inc. The trademark “iPhone” is used in Japan with a license from

Aiphone K.K.

Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the

Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance

standards. Apple is not responsible for the operation of this device or its compliance with safety and

regulatory standards.

Use of the Works with Apple badge means that an accessory has been designed to work specifically with the

technology identified in the badge and has been certified by the developer to meet Apple

performance standards.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Bose Corporation is under license.

Android and Google Play are trademarks of Google LLC.

Snapdragon Sound is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm,

Snapdragon and Snapdragon Sound are trademarks or registered trademarks of Qualcomm Incorporated.

Spotify is a registered trademark of Spotify AB.

USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.

Bose, the B logo, SimpleSync, and SoundLink are trademarks of Bose Corporation. | Bose Corporation

distributed, or otherwise used without prior wrien permission.

Please complete and retain for your records

The serial number is located on the back of the speaker. The model number is located on the back of

the speaker.

Serial number: _____________________________________________________________________________

Model number: 442591

Please keep your receipt. Now is a good time to register your Bose product. You can easily do this by going to

worldwide.Bose.com/ProductRegistrationworldwide.Bose.com/ProductRegistration

CONTENTS

ENG

WHAT’S IN THE BOX

Contents ........................................................................................................................................................ 9

GETTING STARTED

Initial setup .................................................................................................................................................... 10

BLUETOOTH® CONNECTIONS

Connect to a device..................................................................................................................................... 12

Using your device’s Bluetooth seings .......................................................................................... 12

Using the Bose app ........................................................................................................................... 13

Reconnect to a device ................................................................................................................................ 14

Reconnect to the most recently-connected device ................................................................... 14

Reconnect to a dierent device ...................................................................................................... 14

Connect an additional device.................................................................................................................... 15

Identify connected devices ....................................................................................................................... 15

Switch between two connected devices ................................................................................................ 15

Disconnect a device .................................................................................................................................... 16

Clear the speaker device list ...................................................................................................................... 16

Android™ devices only ................................................................................................................................ 17

Connect using Fast Pair .................................................................................................................... 17

Snapdragon Sound™ technology ................................................................................................... 18

SPEAKER CONTROLS

Power on/o .................................................................................................................................................. 19

Auto-o timer...................................................................................................................................... 20

Media playback and volume ...................................................................................................................... 21

Phone calls .................................................................................................................................................... 22

Voice prompt notifications ............................................................................................................... 23

Access voice control .................................................................................................................................... 23

CONTENTS

ENG

BATTERY

Charge the speaker ...................................................................................................................................... 24

Charging time ...................................................................................................................................... 25

Hear the baery level ......................................................................................................................... 25

Baery protection mode ................................................................................................................... 25

STATUS

Power light ..................................................................................................................................................... 26

Bluetooth light .............................................................................................................................................. 27

Shortcut light ................................................................................................................................................ 27

VOICE PROMPTS

Pre-installed languages .............................................................................................................................. 28

Change the language .................................................................................................................................. 28

Disable voice prompts ................................................................................................................................. 28

SHORTCUTS

Use your shortcut ......................................................................................................................................... 29

Change or disable your shortcut ............................................................................................................... 29

SPOTIFY TAP ............................................................................................................................................ 30

CONNECT BOSE PRODUCTS

Link two Bose Bluetooth Speakers ........................................................................................................... 31

Compatible products ......................................................................................................................... 31

Link using the product controls ....................................................................................................... 32

Switch between Stereo mode and Party mode ........................................................................... 33

Unlink the speakers ............................................................................................................................ 33

Connect to a Bose Smart Speaker or Soundbar .................................................................................... 34

Compatible products ......................................................................................................................... 34

Connect using the Bose app ............................................................................................................ 35

Connect using the product controls .............................................................................................. 36

Reconnect a Bose Smart Speaker or Soundbar .................................................................................... 36

CONTENTS

ENG

PORTABILITY

Strap uses ...................................................................................................................................................... 37

Water and dust resistance ......................................................................................................................... 37

CARE AND MAINTENANCE

Update the speaker ..................................................................................................................................... 38

Clean the speaker ....................................................................................................................................... 38

Store the speaker ......................................................................................................................................... 38

Replacement parts and accessories ........................................................................................................ 38

Limited warranty .......................................................................................................................................... 38

TROUBLESHOOTING

Try these solutions first ............................................................................................................................... 39

Other solutions ............................................................................................................................................. 39

Reset the speaker ........................................................................................................................................ 42

ENG

WHAT’S IN THE BOX

CONTENTS

Confirm that the following parts are included:

Bose SoundLink Flex Portable Speaker (2

Gen)

USB Type-C® to USB Type-A cable

NOTE: If any part of the product appears to be missing or damaged, do not use it.

Visit: support.Bose.com/flex2support.Bose.com/flex2 for troubleshooting articles, videos, and

product repair or replacement.

ENG

The speaker ships with a partial charge. Before using the speaker for the first time,

connect it to a power supply. The speaker doesn’t need to be fully charged, but it does

require the initial connection to activate the baery.

INITIAL SETUP

1. Connect the USB-C® end of the cable to the USB-C port on the side of

the speaker.

2. Connect the USB-A end of the cable to a USB-A power supply.

The Power light slowly pulses white.

GETTING STARTED

ENG

3. Press the Power buon I.

The Power light glows solid white. You hear the baery level followed by “Ready to

connect.” The Bluetooth light slowly blinks blue.

4. Connect to your device (see page 12).

ENG

You can store up to six devices in the speaker device list, and the speaker can be

actively connected to up to two devices at a time. You can play audio from only one

device at a time.

CONNECT TO A DEVICE

You can connect the speaker to your device using any of the following:

• Your device’s Bluetooth seings (see “Using your device’s Bluetooth seings”)

• The Bose app (see page 13)

• Fast Pair (Android devices only) (see page 17)

Using your device’s Bluetooth settings

1. Press and hold the Bluetooth buon l until you hear “Ready to connect” and the

Bluetooth light slowly blinks blue.

NOTE: If a device is already connected, you hear “Ready to connect

another device.”

2. On your device, access Bluetooth seings.

3. Select the speaker from the list of available products.

NOTE: Look for the name you entered for the speaker in the Bose app. If you

didn’t name the speaker, the default name appears.

The speaker appears in the list of connected products. The Bluetooth light glows

solid white (see page 27).

BLUETOOTH CONNECTIONS

Bose Flex 2 SoundLink

BLUETOOTH

ENG

BLUETOOTH CONNECTIONS

Using the Bose app

The Bose app lets you set up and control the speaker from any device, such as a

smartphone or tablet.

Using the app, you can manage Bluetooth connections, manage speaker seings,

adjust the audio, choose your voice prompt language, and get any future updates and

new features made available by Bose.

NOTE: If you’ve already downloaded the Bose app for another Bose product, you can

add the speaker from the product list screen.

1. On your device, download the Bose app.

BOSE

2. Follow the app instructions to add the speaker.

ENG

BLUETOOTH CONNECTIONS

RECONNECT TO A DEVICE

Reconnect to the most recently-connected device

When powered on, the speaker connects with the two most

recently-connected devices.

NOTES:

• The device must be within range (30 ft or 9 m) and powered on.

• Make sure the Bluetooth feature is enabled on your device.

Reconnect to a different device

NOTE: The device must be within range (30 ft or 9 m) and powered on.

1. Press the Bluetooth buon l and release to hear which devices are

currently connected.

2. Within 2 seconds, press the Bluetooth buon l again to hear the name of the next

device in speaker device list.

3. Repeat until you hear the correct device name.

4. Play audio on the connected device.

TIP: You can also reconnect a dierent device using the device Bluetooth seings or

the Bose app (see page 13).

NOTE: If two devices are already connected to the speaker, the newly-connected

device replaces the older of the two connections.

ENG

BLUETOOTH CONNECTIONS

CONNECT AN ADDITIONAL DEVICE

The speaker can be actively connected to two devices at a time

(multi-point connection).

To connect an additional device, see page 12.

NOTES:

• You can only play audio from one device at a time.

• To manage or disable the multi-point connection feature, use the Bose app. To

access this option, tap Source on the product control screen.

• Disabling the multi-point connection feature disconnects the second

connected device.

IDENTIFY CONNECTED DEVICES

1. Press the Bluetooth buon l and release to hear which devices are

currently connected.

2. Within 2 seconds, press the Bluetooth buon l again to hear the name of the next

device in the speaker device list.

SWITCH BETWEEN TWO CONNECTED DEVICES

1. Pause audio on your first device.

2. Play audio on your second device.

ENG

BLUETOOTH CONNECTIONS

DISCONNECT A DEVICE

Use the device’s Bluetooth seings or the Bose app.

NOTE: Disabling the Bluetooth feature on your device disconnects the speaker and

all other Bluetooth-connected products.

CLEAR THE SPEAKER DEVICE LIST

1. Press and hold the Bluetooth buon l for 15 seconds until you hear “Bluetooth

device list cleared. Ready to connect” and the Bluetooth light blinks blue.

2. Delete the speaker from the Bluetooth list on your device.

All devices are cleared, and the speaker is ready to connect (see page 12).

ENG

BLUETOOTH CONNECTIONS

ANDROID DEVICES ONLY

If you have an Android device, you can access the following additional

connection features.

Connect using Fast Pair

In one tap, the speaker enables quick, eortless Bluetooth pairing with your

Android device.

NOTES:

• To use Fast Pair, you need an Android device running Android 6.0 or higher.

• Your Android device must have the Bluetooth and Location features enabled.

1. Press and hold the Bluetooth buon l until you hear “Ready to connect” and the

Bluetooth light slowly blinks blue.

NOTE: If a device is already connected, you hear “Ready to connect

another device.”

2. Place the speaker next to your Android device.

A notification displays on your device prompting you to pair the speaker.

NOTE: If you don’t see a notification, check that notifications are enabled for the

Google Play Services app on your device.

3. Tap the notification.

Once the speaker is connected, a notification appears confirming that the

connection is complete.

NOTE: You can also tap the buon on the notification to download the Bose app

and finish seing up the speaker.

ENG

BLUETOOTH CONNECTIONS

Snapdragon Sound technology

Bose SoundLink Flex Portable Speaker (2

Gen) features Snapdragon Sound

technology. Snapdragon Sound optimizes Qualcomm® audio technologies across

connected devices to ensure the best sound quality, connection stability, and latency

for your streaming audio.

To experience Snapdragon Sound, you need a Snapdragon Sound-certified device,

such as a compatible Android device. Once you connect the speaker, your device will

automatically stream audio using the aptX Adaptive Bluetooth codec.

NOTE: To see which Snapdragon Sound features the speaker supports and check if

your device is compatible, visit:

support.Bose.com/flex2support.Bose.com/flex2

ENG

SPEAKER CONTROLS

Controls are located on the top of the speaker.

Bluetooth buon

Shortcut buon

Volume down buon

Power buon

Volume up buon

Play/Pause buon

POWER ON/OFF

Press the Power buon I.

When powered on, a voice prompt announces the baery level. The Power light glows

according to the current baery level (see page 26).

SPEAKER CONTROLS

ENG

Auto-off timer

The auto-o timer conserves the baery when the speaker is operating on baery

power. The speaker switches o when audio has stopped and buons have not been

pressed for 20 minutes.

To wake the speaker, press the Power buon I or press and hold the

Bluetooth buon l.

NOTE: To change the timer seing, use the Bose app. You can access this option

from the Seings menu.

Disable the auto-off timer

Press and hold the Play/Pause buon F and the Volume up buon H simultaneously.

You hear “Auto-o disabled.”

Repeat to re-enable the auto-o timer.

TIP: You can also disable the auto-o timer using the Bose app. You can access this

option from the Seings menu.

SPEAKER CONTROLS

ENG

MEDIA PLAYBACK AND VOLUME

Volume down buon Volume up buon

Play/Pause buon

FUNCTION WHAT TO DO

Play/Pause Press F.

Skip forward Double-press F.

Skip backward Triple-press F.

Volume up

Press H.

NOTES:

• To quickly increase the volume, press and hold H.

• When the maximum volume is reached, the

Bluetooth light blinks white 2 times.

Volume down

Press z.

NOTES:

• To quickly decrease the volume, press and hold z.

• When the minimum volume is reached, the

Bluetooth light blinks white 2 times.

TIP: You can also increase or decrease the volume using the volume controls on

your device or in the Bose app. You can access this option on the product

control screen.

ENG

SPEAKER CONTROLS

PHONE CALLS

FUNCTION WHAT TO DO

Answer a call Press F.

End a call While on a call, double-press F.

Decline an incoming call Double-press F.

Answer a second incoming call and

put the current call on hold

While on a call, press F.

When two calls are active, end

the current call and switch to

a second line

Double-press F when both calls are active.

Decline a second incoming call and

stay on the current call

While on a call, double-press F.

Switch between two calls

With two active calls, press F.

NOTE: Mute is not available when two calls

are active.

Mute/Unmute a call While on a call, press F

Make a call using voice control

Press E.

NOTE: Shortcut must be set to voice assistant in the

Bose app.

Shortcut buon

Play/Pause buon

Volume down buon Volume up buon

SPEAKER CONTROLS

ENG

Voice prompt notifications

The speaker identifies incoming callers who are saved in your contact list.

To disable this feature, see page 28.

NOTE: Disabling voice prompt notifications also disables voice prompts.

ACCESS VOICE CONTROL

The speaker microphone acts as an extension of the microphone in your connected

device. Using the Shortcut buon E on the speaker, you can access the voice control

capabilities on your device to make calls or access your voice assistant to play music,

tell you the weather, give you the score of a game, and more.

NOTES:

• Shortcut must be set to voice assistant in the Bose app.

• Your device must have voice assistant enabled.

ENG

BATTERY

CHARGE THE SPEAKER

CAUTION: Do not aempt to charge the speaker while the speaker is wet. Doing

so may cause damage to the speaker. The speaker is waterproof, but the

USB-C port must be fully dried out before charging.

NOTE: Make sure you’re using the Bose-provided USB cable or a similar USB cable.

Bose recommends using a 5V p, 1.5A capable power source.

1. Connect the USB-C end of the cable to the USB port on the side of

the speaker.

2. Connect the USB-A end of the cable to a power source such as a computer or

wall charger.

While charging, the baery light pulses white. When the baery is fully charged,

the baery light glows solid white.

BATTERY

ENG

Charging time

Allow up to 4 hours to fully charge the baery.

A full charge powers the speaker up to 12 hours.

At maximum volume, the baery

lasts up to 3 hours.

Charging time and baery performance vary with the USB power supply capability,

music content, and speaker volume.

Hear the battery level

Each time you power on the speaker, a voice prompt announces the baery level.

When the speaker is in use, a voice prompt announces if the baery needs to

be charged.

Press and hold the Power buon I until you hear a voice prompt.

Battery protection mode

When the speaker baery is depleted (0%) it enters baery protection mode. To

reactivate the speaker, connect it to a power supply and press the Power buon I.

When not in use, store the speaker in a cool place.

CAUTION: Do NOT store the speaker for extended periods when fully charged or with

a remaining charge of less than 10%.

All tests conducted by Bose with production-representative Bose SoundLink Flex Portable Speaker (2

Gen), between

68° F – 77° F (20° C – 25° C).

1 With 5V/1.5A (7.5W) USB-A capable power supply, from 0% to 100% while unit is in standby mode. Charging times will vary

when not using the recommended 7.5W supply.

2 Using Bluetooth A2DP audio at 50% volume, with default EQ using a mix of Top 50 Global tracks as of February 2024. Baery

performance varies with individual user conditions such as audio content, loudness, and environmental temperature.

3 Using Bluetooth A2DP audio at 100% volume, with default EQ using a mix of Top 50 Global tracks as of February 2024. Baery

performance varies with individual user conditions such as audio content, loudness, and environmental temperature.

ENG

The Power, Bluetooth, and Shortcut lights are located on the top of the speaker.

POWER LIGHT

Shows the baery, charging, update, and error status.

LIGHT ACTIVITY SYSTEM STATE

Solid white Full charge

Solid amber Low charge

Blinks amber Need to charge

Slowly pulses white Charging

Blinks white 3 times (repeated) Updating software

Quickly blinks white (3 seconds) Reset complete

Quickly blinks white and

amber (alternating)

Error - contact Bose customer service

Blinks amber 3 times (repeated) Failed baery - contact Bose customer service

STATUS

Power light

Bluetooth light

Shortcut light

STATUS

ENG

BLUETOOTH LIGHT

Shows the Bluetooth connection status.

LIGHT ACTIVITY SYSTEM STATE

Slowly blinks blue Ready to connect

Quickly blinks blue Connecting

Solid white Connected

Blinks white 2 times Device list cleared

SHORTCUT LIGHT

Shows the status of speakers when linking is set as the shortcut.

LIGHT ACTIVITY SYSTEM STATE

Slowly blinks white Speakers are linking

Solid white Speakers are linked

ENG

VOICE PROMPTS

Voice prompts guide you through the Bluetooth connection process, announce the

baery level, and identify connected devices.

TIP: You can easily manage voice prompts using the Bose app. Access this

option from the Seings menu.

PRE-INSTALLED LANGUAGES

The following languages are pre-installed on the speaker:

• English • German • Japanese

• Spanish • Italian • Cantonese

• French • Mandarin

CHANGE THE LANGUAGE

Change the voice prompt language using the Bose app. Access this option from the

Seings menu.

DISABLE VOICE PROMPTS

Press and hold the Shortcut buon E and Volume down buon z simultaneously

until you hear “Voice prompts o.”

NOTE: Repeat to re-enable voice prompts.

ENG

SHORTCUTS

The programmable Shortcut buon E enables you to quickly and easily access one

of the following functions:

• Link two Bose Bluetooth Speakers (default) (see page 31)

• Open your synced device’s voice assistant (see page 23)

• Access Spotify Tap (see page 30)

USE YOUR SHORTCUT

Press the Shortcut buon E.

The Shortcut light blinks once.

NOTE: The Shortcut buon E is set by default to link two Bose Bluetooth speakers

(see page 31).

CHANGE OR DISABLE YOUR SHORTCUT

To change or disable your shortcut, use the Bose app. To access this option, tap

Shortcut on the product control screen.

ENG

Spotify Tap is music to your ears, quite literally. Get the tunes playing with a

simple gesture.

NOTE: To use Spotify Tap, it must be set as your shortcut in the Bose app and the

Spotify app must be up to date.

1. Press the Shortcut buon

to play a recommendation based on your

listening taste.

2. Press the Shortcut buon again for the next recommendation made just

for you.

SPOTIFY TAP

ENG

CONNECT BOSE PRODUCTS

LINK TWO BOSE BLUETOOTH SPEAKERS

For a more immersive music experience, you can sync your Bose SoundLink Flex

Portable Speaker (2

Gen) with another compatible Bose Bluetooth speaker and play

the same audio from both speakers in Stereo mode or Party mode.

• Stereo mode (left speaker and right speaker play separately)

• Party mode (left speaker and right speaker play in unison)

NOTES:

• The Shortcut buon E is set by default to link two Bose Bluetooth speakers.

• You can link to only one other speaker at a time.

• Make sure that the two speakers are within 30 ft (9 m) of each other.

• Make sure that the two speakers are within 30 ft (9 m) of the streaming device.

• For an optimal experience, position the speakers in the same room or outdoor area

with no obstructions between them. Performance may vary based on device,

distance, and environmental factors.

Compatible products

You can link the Bose SoundLink Flex Portable Speaker (2

Gen) to any Bose

Bluetooth speaker that has a Shortcut buon.

CONNECT BOSE PRODUCTS

ENG

Link using the product controls

1. On the speaker, press the Shortcut buon E.

The voice prompt directs you to press the Shortcut buon on a second speaker.

The Shortcut light slowly blinks white.

2. On a second compatible Bose Bluetooth speaker, press the Shortcut buon E.

The Shortcut light slowly blinks white.

Once the two speakers are linked, a voice prompt announces the mode on both

speakers. The Shortcut light on both speakers glows solid white.

NOTE: If the speakers are the same model you hear “Stereo mode,” followed by

“Left” on the primary speaker and “Right” on the secondary speaker. If they

are dierent models, you hear “Party mode” on both speakers.

CONNECT BOSE PRODUCTS

ENG

Switch between Stereo mode and Party mode

On either speaker, press the Shortcut buon E.

A voice prompt announces the mode on each speaker.

NOTE: If the speakers are dierent models, you can only play audio in Party mode.

TIP: You can also switch between Stereo mode and Party mode using the Bose app.

You can access this option on the product control screen.

Unlink the speakers

On either speaker, press the Power buon I or press and hold the

Shortcut buon E.

A voice prompt announces the speakers are no longer linked.

TIP: You can also use the Bose app to unlink the speakers. You can access this option

on the product control screen.

CONNECT BOSE PRODUCTS

ENG

CONNECT TO A BOSE SMART SPEAKER OR SOUNDBAR

With Bose SimpleSync technology, you can connect the speaker to a Bose Smart

Speaker or Bose Smart Soundbar to listen to the same audio in two dierent rooms at

the same time.

NOTE: SimpleSync technology has a Bluetooth range of up to 30 ft (9 m). Walls and

construction materials can aect reception.

Compatible products

You can connect the speaker to any Bose Smart Speaker or Bose Smart Soundbar.

Popular compatible products include:

• Bose Smart Ultra Soundbar/Bose Ultra Soundbar

• Bose Smart Soundbar 900

• Bose Smart Soundbar 700/Bose Soundbar 700

• Bose Smart Soundbar 600

• Bose Soundbar 500

• Bose Smart Speaker 500/Bose Home Speaker 500

• Bose Home Speaker 300

• Bose Portable Smart Speaker/Bose Portable Home Speaker

New products are added periodically. For a complete list and more information, visit:

support.Bose.com/Groupssupport.Bose.com/Groups

CONNECT BOSE PRODUCTS

ENG

Connect using the Bose app

1. Press and hold the Bluetooth buon l until you hear “Ready to connect” and the

Bluetooth light slowly blinks blue.

NOTE: If a device is already connected, you hear “Ready to connect

another device.”

2. Use the Bose app to connect the speaker to a compatible Bose product. For more

information, visit: support.Bose.com/Groupssupport.Bose.com/Groups

NOTES:

• It could take up to 30 seconds to connect.

• Make sure that the speaker is within 30 ft (9 m) of the speaker or soundbar.

• You can connect the speaker to only one product at a time.

CONNECT BOSE PRODUCTS

ENG

CONNECT BOSE PRODUCTS

Connect using the product controls

1. Press and hold the Bluetooth buon l until you hear “Ready to connect” and the

Bluetooth light slowly blinks blue.

NOTE: If a device is already connected, you hear “Ready to connect

another device.”

2. On the soundbar remote or the top of the speaker, press and hold the Bluetooth

buon l until the light bar or light ring pulses blue.

The speaker connects to the soundbar or speaker, and you hear the same audio

through both devices.

NOTES:

• It could take up to 30 seconds to connect.

• Make sure that the speaker is within 30 ft (9 m) of the speaker or soundbar.

• You can connect the speaker to only one product at a time.

RECONNECT A BOSE SMART SPEAKER OR SOUNDBAR

Use the Bose app to reconnect the speaker to a previously-connected

compatible Bose product. For more information, visit:

support.Bose.com/Groupssupport.Bose.com/Groups

NOTES:

• The speaker or soundbar must be within range (30 ft or 9 m) and powered on.

• If the speaker doesn’t connect, see “Speaker doesn’t reconnect to a

previously- connected Bose Smart Speaker or Soundbar” on page 41.

ENG

PORTABILITY

STRAP USES

You can use the strap as a finger loop to easily carry the speaker. You can also aach

it to a carabiner or a cord.

WATER AND DUST RESISTANCE

The speaker is waterproof, splash resistant, and dustproof. It is rated IP67 and IP64.

You can immerse the speaker in water for up to 30 minutes at a depth of up to

3.3 ft (1 m). It can also be used while showering and in the rain or snow.

CAUTIONS:

• Do NOT submerge this speaker in any pool of water deeper than 3.3 ft (1 m).

• If the speaker is exposed to salt or chlorinated water, gently rinse with fresh water

following the exposure to remove residue. Make sure the connector port is fully

dried out before charging.

• Never aempt to charge the speaker while it is wet. Doing so may cause

damage to the speaker.

> 3.3 ft

(1 m)

ENG

CARE AND MAINTENANCE

UPDATE THE SPEAKER

The speaker begins updating automatically when connected to the Bose app and an

update is available. Follow the app instructions. When the update begins, the Power

light blinks white 3 times (repeated) until the update is complete.

You can also update the speaker using the Bose updater website. On your computer,

visit: btu.Bose.combtu.Bose.com and follow the on-screen instructions. When the update begins,

the Power light blinks white 3 times (repeated) until the update is complete.

CLEAN THE SPEAKER

The speaker may require periodic cleaning.

• Clean the surface of the speaker with a soft, damp cloth (water only). Make sure the

USB-C port is fully dried out before charging.

• Do not use any solvents, chemicals or cleaning solutions containing alcohol,

ammonia, or abrasives.

• If the speaker is exposed to salt or chlorinated water, gently rinse with fresh water

following the exposure to remove residue. Make sure the USB-C port is fully dried

out before charging.

STORE THE SPEAKER

When not in use, store the speaker in a cool place.

CAUTION: Do NOT store the speaker for extended periods when the baery is fully

charged or has a low charge (see page 25).

REPLACEMENT PARTS AND ACCESSORIES

Replacement parts and accessories can be ordered through Bose customer service.

Visit: support.Bose.com/flex2support.Bose.com/flex2

LIMITED WARRANTY

The speaker is covered by a limited warranty. Visit our website at

worldwide.Bose.com/Warrantyworldwide.Bose.com/Warranty for details of the limited warranty.

To register your product, visit

worldwide.Bose.com/ProductRegistrationworldwide.Bose.com/ProductRegistration for

instructions. Failure to register will not aect your limited warranty rights.

ENG

TROUBLESHOOTING

TRY THESE SOLUTIONS FIRST

If you experience problems with the speaker:

• Power the speaker o and then on again (see page 19).

• Check the status lights (see page 26).

• Make sure your device supports Bluetooth connections (see page 12).

• Charge the speaker (see page 24).

• Increase the volume on the speaker, your device, and the music app.

• Move your device closer to the speaker (30 ft or 9 m) and away from any

interference or obstruction.

• Try connecting another device (see page 12).

If you couldn’t resolve your issue, see the table below to identify symptoms and

solutions to common problems. You can also access troubleshooting articles, videos,

and other resources at: support.Bose.com/flex2support.Bose.com/flex2

If you’re unable to resolve your issue, contact Bose customer service.

Visit: worldwide.Bose.com/contactworldwide.Bose.com/contact

D-Link SoundLink Flex Portable Bluetooth Speaker 2nd Gen Waterproof Durable Wireless Sound Quality 887612-0200

Product's Documents

Owner's Manual

Specifications

D-Link 887612-0200 Questions and Answers