Loading ...
Loading ...
Loading ...
8.
Set linkage method. See Linkage Method Seîž«ngs .
View Face Picture Comparison Result
Steps
1.
Go to Applicaon.
2.
Set search condion and click Counng.
Matched results are shown in Face Picture Comparison Stascs area.
10.6.2 Face Modeling
Face modeling serves the purpose of collecng face pictures, creang face models and uploading
data to the surveillance center.
Before You Start
Face Capture or Mul-Target-Type detecon should be congured for face picture collecon. See
Face Capture or Mul-Target-Type Detecon for conguraon instrucons.
Steps
1.
Go to Conguraon → Comparison and Modeling .
2.
Select Face Modeling to start.
3.
Check Enable Face Modeling.
4.
Set parameters for modeling.
Report Face Modeling Informaon in Mul-Target-Type Capture Alarm
When a person triggers the mul-target-type detecon, the alarm informaon includes the
face modeling informaon of the detected face if checked.
Quick Capture
The device starts face modeling when it detects a face which scores higher than the set face
grading threshold for capture.
Face Grading Threshold for Capture
The face grading threshold for the device to judge whether to capture and upload the face or
not. Higher value means beîž©er picture quality.
Max. Capture Interval
The max. interval between two captures when the target is in the detecon area. The camera
takes the capture when it reaches the max. interval even if the face grading does not reach
the set threshold.
5.
Set arming schedule. See Set Arming Schedule .
6.
Set linkage method. See Linkage Method Seîž«ngs .
Network Camera User Manual
103
Loading ...
Loading ...
Loading ...