Loading ...
Loading ...
Loading ...
1773/1775/1777
Users Manual
16
USB-C Power
You can power the Analyzer with the USB-C connection to a wall outlet adapter when power
from measurement line is not available.
Setup:
1. Connect the USB-C cable to the Analyzer.
2. Connect the USB-C cable to the wall outlet adapter.
The Analyzer automatically turns on and is ready to use in <30 seconds.
Note
Power from the USB-C requires a minimum 18 W wall outlet adapter. The supported
voltage/current ratings are 9 V/2 A or 12 V/1.5 A.
Touchscreen/Basic Navigation
The touchscreen lets you interact directly with what is on the display. To change parameters,
touch a target on the display. Touch targets are easy to recognize, such as large buttons,
icons, menus, or keys on a virtual keyboard.
The touchscreen works when you must wear gloves for operation, including a combination of
1 mm rubber gloves and leather gloves with ARC 4 protection rating. For best practice, make
sure you keep the distance between your finger and the screen to a minimum. For example,
avoid pressing on the screen with a glove seam between finger and screen.
As backup, use the pushbuttons to the right of the display to operate the Analyzer.
Home Screen
The Home screen is your primary access to all functions of the Analyzer. The Analyzer
functions are divided into two modes of operation: PQ Meter or PQ Logger. Tap in the
upper left corner of the display to return to the Home screen or the previous submenu.
Icons at the top of the Home screen are quick access for:
Info Overview
Instrument Settings
Recording
Memory
Home
<
i
REC
Memory
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...