Loading ...
Loading ...
Loading ...
51
English
Installation Procedure
Steps Remote control display
b Set the SEG24 value by pressing the
(High Fan) button repeatedly until the value
you want to set appears on the remote control display.
When you press the
(Low Fan) or (High Fan) button, values appear in the
following order:
SEG24
3 Check whether the option values that you have set are correct by pressing the
(Mode) button repeatedly
[SEG2, SEG3]
[SEG14, SEG15]
[SEG4, SEG5]
[SEG16, SEG17]
[SEG6, SEG8]
[SEG18, SEG20]
[SEG9, SEG10]
[SEG21, SEG22]
[SEG11, SEG12]
[SEG23, SEG24]
4 Save the option values into the indoor unit:
Point the remote control to the remote control sensor on the indoor unit and then press the
(Power) button on the
remote control twice. Make sure that this command is received by the indoor unit. When it is successfully received, you can
hear a short sound from the indoor unit. If the command is not received, press the
(Power) button again.
5 Check whether the air conditioner operates in accordance with the option values you have set:
a Reset the indoor or outdoor unit.
• Indoor unit : Press the
(Set) and (Low Fan) buttons on the remote control simultaneously for 4 seconds.
• Outdoor unit : Press the K3 button.
b Remove the batteries from the remote control, insert them again, and then press the
(Power) button on the remote
control.
Setting the indoor unit addresses
Option No. for an indoor unit address: 0AXXXX-1XXXXX-2XXXXX-3XXXXX
Before installing an indoor unit, be sure to set an address for the indoor unit by taking the following steps:
1 Make sure that the power is supplied to the
indoor unit. If the indoor unit is not plugged in,
it must include a power supply.
1(L)
F1
F1
2(N)
Indoor Unit
DB68-11731A-02_IBIM_PAC Mirage Cooling Only_TC_EN_.indd 51DB68-11731A-02_IBIM_PAC Mirage Cooling Only_TC_EN_.indd 51 2023-07-19 오전 9:52:202023-07-19 오전 9:52:20
Loading ...
Loading ...
Loading ...