FLUKE 1504-156 User Manual for the Fluke 1504-156 Thermometer Readout, Tweener Thermistor, ±0.002°C at 0°C Temperature Accuracy

Loading ...

To recharge the battery, disconnect the battery’s plug from the 1502A and plug

it into the mating connector from the battery charger. Attach the charger’s AC

plug into an AC supply of the proper voltage (normally 100 to 125V AC, 50/60

Hz; optionally 200 to 230V AC, 50/60 Hz.). The charger takes about six hours

to fully charge the battery. The charger will stop charging automatically when

the battery is full.

Certain precautions must be observed with the battery and charger. These de-

vices can present safety concerns if misused or damaged. To avoid the risk of

electric shock or fire do not use the charger outdoors or in a dusty, dirty, or wet

environment. If the cord, case, or plug of the charger is damaged in any way

discontinue its use immediately and have it replaced. Never disassemble the

charger. The battery may contain chemicals that are hazardous. To avoid the

risk of exposure to dangerous substances or explosion, immediately discon-

tinue use of the battery if it leaks or becomes damaged. Never allow the bat-

tery to be shorted, heated, punctured, dropped, or squashed. Store the battery

where it will not come into contact with metal or fluids that might short circuit

the battery and where it will be safe from excessive temperatures. When no

longer usable the battery must be recycled. The battery may be returned to the

seller for recycling. Do not dispose the battery in a landfill. Never dispose the

battery in fire as there is danger of explosion which may cause injury or prop-

erty damage.

1502A Manual Rev. 952801 11

4 Quick Start

–

Figure 2 12 V DC power source polarity

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 1504-156 Thermometer Readout, Tweener Thermistor, ±0.002°C at 0°C Temperature Accuracy