GENPOWER PURESINE2500W Pure Sine Wave Inverter 2500W 12V User Manual

WARNING! Read and understand all safety warnings and

instructions carefully before using this machine. Failure to follow

the warnings and instructions may result in electric shock, fire

and/or serious injury. Save this manual for future reference.

ATTENTION! Products covered by this manual will vary in

appearance, assembly, inclusions, description and packaging.

NOTE! This manual covers multiple styles of product as well as

options / accessories that may not be suitable for the machine

you have purchased.

User Manual

[Revision 8.0 November 2023]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE

TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE

AND MAY VOID WARRANTY. • KEEP THIS MANUAL FOR

FUTURE REFERENCE. • Products covered by this manual may

vary in appearance, assembly, inclusions, specifications,

description, and packaging.

Power Inverters

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or equipment

damage may occur.

It is vital that you read and understand this

user manual before using the product,

including safety warnings, and any assembly

and operating instructions. Keep the manual

for future reference.

Safety precautions and recommendations

detailed here must be fully understood and

followed to reduce the risk of injury, fire,

explosion, electrical hazard, and/or property

damage.

Safety information presented here is generic

in nature – some advice may not be

applicable to every product. The term

"equipment" refers to the product, be it

electrical mains powered, battery powered or

combustion engine powered.

• Before Use - If you are not familiar with the

safe operation/handling of the equipment or

are in any way unsure of any aspect of

suitability or correct use for your

application, you should complete training

conducted by a person or organization

qualified in safe use and operation of this

equipment, including fuel/electrical handling

and safety.

• Do NOT operate the equipment in

flammable or explosive environments, such

as in the presence of flammable liquids,

gases, or dust. The equipment may create

sparks or heat that may ignite flammable

substances.

• Keep clear of moving parts.

• Equipment may be a potential source of

electric shock or injury if misused.

• Do NOT operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

• Do NOT allow others to use the equipment

unless they have read this manual and are

adequately trained.

• Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

General Work Area Safety

• Work areas should be clean and well it.

• Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

• If devices are provided for connecting dust

extraction / collection facilities, ensure

these are connected and used properly.

Dust collection can reduce dust-related

hazards.

General Personal Safety

• Wear appropriate protective equipment

when operating, servicing, or when in the

operating area of the equipment to help

protect from eye and ear injury, poisoning,

burns, cutting and crush injuries. Protective

equipment such as safety goggles,

respirators, non-slip safety footwear, hard

hat, hearing protection etc should be used

for appropriate equipment / conditions.

Other people nearby should also wear

appropriate personal protective equipment.

Do not wear loose clothing or jewellery,

which can be caught in moving parts. Keep

hair and clothing away from the equipment.

• Stay alert and use common sense when

operating the equipment. Do not over-

reach. Always maintain secure footing and

balance.

• Do not use the equipment if tired or under

the influence of drugs, alcohol, or

medication.

• This equipment is not intended for use by

persons with reduced physical, sensory, or

mental capabilities.

General Fuel Safety

• Petrol/fuel/gasoline is extremely flammable

– keep clear of naked flames or other

ignition sources.

• Do not spill fuel. If you spill fuel, wipe it off

the equipment immediately – if fuel gets on

your clothing, change clothing.

• Do NOT smoke near fuel or when

refuelling.

• Always shut off the engine before

refuelling.

• Do NOT refuel a hot engine.

• Open the fuel cap carefully to allow any

pressure build-up in the tank to release

slowly.

• Always refuel in well ventilated areas.

• Always check for fuel leakage. If fuel

leakage is found, do not start, or run the

engine until all leaks are fixed.

General Carbon-Monoxide Safety

• Using a combustion engine indoors CAN

KILL IN MINUTES. Engine exhaust

contains carbon-monoxide – a poison you

cannot smell or see.

• Use combustion engines OUTSIDE only,

and far away from windows, doors, and

vents.

General Equipment Use and Care

• The equipment is designed for domestic

use only.

• Handle the equipment safely and carefully.

• Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage, or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorised service centre or technician

before use.

• Prevent unintentional starting of the

equipment - ensure equipment and power

switches are in the OFF position before

connecting or moving equipment. Do not

carry equipment with hands or fingers

touching any controls. Remove any tools or

other items that are not a part of the

equipment from it before starting or

switching on.

• Do not force the equipment. Use the

correct equipment for your application.

Equipment will perform better and be safer

when used within its design and usage

parameters.

• Use the equipment and accessories etc. in

accordance with these instructions,

considering working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

• Always keep equipment components

(engines, hoses, handles, controls, frames,

housings, guards etc) and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment clean and,

where applicable, properly lubricated.

• Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place or store the equipment

near flammable materials, combustible

gases, or liquids etc.

• The equipment is not weather-proof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations that

are damp or humid.

• Do not clean equipment with solvents,

flammable liquids, or harsh abrasives.

• For specific equipment safety use and care,

see Equipment Safety.

Power Inverters

General Electrical Safety

• Inspect electrical equipment, extension

cords, power bars, and electrical fittings for

damage or wear before each use. Repair or

replace damaged equipment immediately.

• Ensure all power sources conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment.

• When wiring electrically powered

equipment, follow all electrical and safety

codes.

• Always use a Residual Current Device

(RCD) (GFCI) / Earth Leakage Circuit

Breaker / Safety Switch when operating this

item (electrical items only).

• High voltage / high current power lines may

be present. Use extreme caution to avoid

contact or interference with power lines.

Electrical shock can be fatal.

• Only a fully licenced electrician should

perform installation or maintenance where

terminals/wiring/circuit boards that may at

any time be live with 240V AC electricity

are accessed.

General Electrical Safety

• Electrically grounded equipment must have

an approved cord and plug and be

connected to a grounded electrical outlet.

• Do NOT bypass the ON/OFF switch and

operate equipment by connecting and

disconnecting the electrical cord.

• Do NOT use equipment that has exposed

wiring, damaged switches, covers or

guards.

• Do NOT use electrical equipment in wet

conditions or in damp locations.

• Do NOT use electrical cords to lift, move or

carry equipment.

• Do NOT coil or knot electrical cords, and

ensure electrical cords are not trip hazards.

General Service Information

• The equipment must be serviced or

repaired at authorised service centres by

qualified personnel only.

• Replacement parts must be original

equipment manufacturer (OEM) to ensure

equipment safety is maintained.

• Do NOT attempt any maintenance or repair

work not described in this manual.

• After use, the equipment and components

may still be hot – allow the equipment to

cool and disconnect spark plugs and/or

electrical power sources and/or batteries

from it before adjusting, changing

accessories, or performing repair or

maintenance.

• Do NOT adjust while the equipment is

running.

• Perform service-related activities in suitable

conditions, such as a workshop.

• Replace worn, damaged or missing

warning/safety labels immediately.

WARNING!

PLEASE NOTE THE FOLLOWING POINTS TO REDUCE CHANCES OF FIRE OR ELECTROCUTION.

• HIGH VOLTAGE: Internal voltages reach in excess of 300V. This is not a toy. Keep dry, well ventilated and prevent access by persons unfamiliar

with inverters.

INSTALLATION

Permanent or vehicle installation requirements vary depending on jurisdiction, vehicle and application, hence only general guidance is supplied

below. Consult vehicle manufacturer and local regulations to ensure your installation complies with both the vehicle it is installed into and the

states/areas the inverter system will be operated in.

• INSTALLERS: If installing the inverter or associated wiring into a permanent location, or into a vehicle, caravan or boat, a licensed electrician

must be used for earthing and 240V wiring requirements. A qualified auto electrician may be required for 12V (12 Volt) wiring, fuses and circuitry.

• 12V WIRE GAUGE (THICKNESS): Use of wiring with inadequate rated capacity (commonly too thin) will result in the wire heating up or burning

when a large amount of power is drawn from the system. Burning wire will cause fire! 12V wiring for a 3000W inverter must be capable of

handling hundreds of amps - this is very thick wire. Consult a qualified Auto-Electrician when selecting suitable 12V wire.

• FUSES: A separate fuse or circuit breaking device should be placed "at the battery" to protect 12V wiring in the case of overload or short-circuit.

• KEEP 12V SUPPLY CABLES AS SHORT AS POSSIBLE: When under load, due to high currents drawn through the 12V wiring, the voltage

present at the 12V terminals on the inverter may be less than at the battery. This may result in incorrect inverter operation. Shorter supply cables

will reduce "voltage drop.

Power Inverters

Safety Symbols

The product may have safety warning labels attached to it, explained below. Understand the symbols on your

product and their meanings. If any stickers become unreadable, unattached etc., replace them.

Flammable Material Hazard

Flammable liquids, gases, or

substances etc may present.

Avoid ignition sources and open

flames. Danger of fire.

Read User Manual

Read and fully understand

product safety warnings,

operation, procedures etc before

using the product.

Use Hand Protection

Wear appropriate hand protection

and take due care as the product

or use of the product may present

hand hazards.

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Electrocution / Electrical Shock

Hazard

High voltage or high current

electricity may be present or

required by the product. Take

due care when handling electrical

products, cables, plugs and

leads. Electrical shock can be

fatal.

Toxic Fumes / Dust Hazard

Using the product or by-products

from use may produce fumes,

smoke or particles that could be

harmful if inhaled. Wear

appropriate breathing protection

and have adequate ventilation.

Explosive Material Hazard

Combustible liquids, gases, or

substances etc may be present.

Avoid ignition sources and open

flames. Danger of explosion.

Cutting / Amputation Hazard

The product may have blades,

edges or mechanical devices that

can cause severe cut injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Crush Hazard

The product may have blades,

edges or mechanical devices that

can cause severe crush injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Single Operator Only

The product must be operated by

a single person only. More than

one person operating the product

may introduce additional hazards.

Use Face Protection

Wear appropriate full-face

protection and take due care as

the product or use of the product

may present face and eye

hazards.

Use Foot Protection

Wear appropriate foot protection

and take due care as the product

or use of the product may present

foot hazards.

Use Eye / Ear / Head Protection

Wear appropriate eye and / or

ear and / or head protection and

take due care as the product or

use of the product may present

eye, hearing, and head hazards.

Running Hazard

Do not run on or near the product

as doing so may present a fall

hazard.

Diving Hazard

Do not dive into the product as

doing so may present a neck /

head injury hazard.

Adult Supervision Required

Always supervise children and

other users of a product to

prevent drowning or injury.

Skin Penetration / Puncture

Hazard

The product may produce

pressure, emit liquids or objects

that can cause severe injury to

fingers, limbs, blood etc. Take

due care when handling and

using the product.

Hot Surface Hazard

Be aware that the product may

produce high temperatures and

hot surfaces that can cause burn

injuries.

Flying Debris Hazard

Be aware that the product or use

of the product may present

hazards produced by flying

debris. Wear appropriate clothing

and protective devices.

Moving Parts Hazard

Be aware that the product

contains or uses mechanical

devices that move or rotate.

Always wait for moving parts to

stop fully before handling the

product, adjusting, maintenance

etc.

Power Inverters

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Pull Hazard

Be aware that the product

contains or uses mechanical

devices that can pull in objects

and can cause severe injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Slope / Fall Injury Hazard

Be aware that using the product

on sloping surfaces or in slippery

conditions may present additional

dangers from falls and contact

with blades, moving parts, hot

surfaces etc.

"Slam Dunk" Warning

Do NOT attempt "slam dunk"

manoeuvres as this may result in

severe injury due to falling,

product breakage or collapse etc.

Electrocution / Electrical Shock

Hazard - Outdoor

High voltage or high current

electricity may be present or

required by the product. Do NOT

use in rain, damp, or wet

conditions. Electrical shock can

be fatal.

Electrocution / Electrical Shock

Hazard - Disconnect

High voltage or high current

electricity may be present or

required by the product. Always

disconnect the product from the

electrical supply before handling

the product, adjusting,

maintenance etc.

Power Line Electrocution

Hazard

High voltage / high current power

lines may be present. Use

extreme caution to avoid contact

or interference with power lines.

Electrical shock can be fatal.

"Kick-Back" Hazard

High level of "kick-back" hazard

that can cause the machine to

suddenly rotate towards operator.

Kick-back injury can be fatal.

Winch Operator Position

Hazard

Do NOT stand between winch

and load. Do NOT use winch to

move people.

Winch Lift Hazard

Do NOT LIFT load vertically. Use

machine to PULL only.

Cable Hazard

Ensure that load bearing cable is

not kinked or knotted.

Winch Cable Hazard

Ensure that there is a minimum

number of cable coils on

winching mechanism.

Winch Hook Hazard

Carry hook to load – do NOT

throw or run.

Flash / Blinding Hazard

Wear appropriate eye protection

for welding. Direct exposure to

weld arcs may cause permanent

eye injury.

Laser Hazard

Laser may be in use – do NOT

look directly at laser or allow

others to.

Power Inverters

Table of Contents

Safety ............................................................................................................................................................. 2

Safety Symbols ........................................................................................................................................................... 4

Introduction ................................................................................................................................................... 7

Operating Instructions ................................................................................................................................................ 7

Safety First .................................................................................................................................................... 8

Safety Features ............................................................................................................................................. 9

Installation Environment .............................................................................................................................. 9

Working Principle ......................................................................................................................................... 9

Parts Identification ..................................................................................................................................... 10

Spare Parts .................................................................................................................................................. 11

Power Supply .............................................................................................................................................. 12

Connecting to the Power .......................................................................................................................................... 12

Connections .............................................................................................................................................................. 12

Fuse .......................................................................................................................................................................... 12

Power Inverter Position ............................................................................................................................................ 12

Connecting to the Vehicle Battery ............................................................................................................................ 12

Alarm in Case of Voltage Drop ................................................................................................................................. 13

Malfunctions ................................................................................................................................................ 13

General Problems ....................................................................................................................................... 13

Troubleshooting ......................................................................................................................................... 14

Specifications ............................................................................................................................................. 15

PURESINE1500W .................................................................................................................................................... 15

PURESINE2500W .................................................................................................................................................... 15

SINE2500W .............................................................................................................................................................. 15

PURESINE600W ...................................................................................................................................................... 16

PURESINE2000W .................................................................................................................................................... 16

PURESINE1000W .................................................................................................................................................... 17

PURESINE300W ...................................................................................................................................................... 17

PURESINE3000W .................................................................................................................................................... 18

PURESINE5000W .................................................................................................................................................... 18

Power Inverters

Introduction

Thank you for purchasing our Power Inverter. It is a compact and highly portable power inverter, is the leader in

the field of high frequency inverter. From the 12V/24V/48V DC outlet in your vehicle or boat, or directly from a

dedicated 12V/24V/48V DC battery, the inverter will efficiently and reliably power a wide variety of household AC

products, such as TVs, computers, VCRs, etc. The inverter is designed to provide years of trouble-free operation

and includes automatic safety monitoring circuit to protect the inverter and your battery and loads from

inadvertent overload conditions. Please read this guide before installing or using the inverter and save it for

future reference.

Operating Instructions

•

This product was developed carefully and designed for permanent use.

•

Please read these instructions carefully and keep them for subsequent reference.

•

Please read the Precautions section carefully to avoid any damage to the power inverter or the other units

that are used.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

Power Inverters

Safety First

Incorrect installation or misuse of the inverter may result in danger to the user or hazardous conditions. We urge

you to pay special attention to all CAUTION and WARNING statements. CAUTION statements identify

conditions or practices that may result in damage to the inverter or to other equipment. WARNING statements

identify conditions that may result in personal injury or loss of life.

WARNING! Shock hazard. Keep away from children.

•

The inverter generates the same potentially lethal AC power as a normal household wall outlet. Treat it as

you use any other AC outlet.

•

Do not insert foreign objects into the inverter's AC outlet, fan or vent openings.

•

Do no expose the inverter to water, rain, snow or spray.

•

Do not, under any circumstances. connect the inverter to AC Power.

WARNING! Heated surface

•

The inverters housing may become uncomfortably warm, reaching 60°C) under extended high-power

operation. Ensure at least 5cm of space is maintained on all sides of the- inverter. During operation, keep

away from materials that may be affected by high temperature.

WARNING! Explosion hazard

•

Do not use the inverter in the presence of flammable fumes or gases, such as in the bilge of a gasoline-

powered boat, or near propane tanks. Do not use the inverter in an enclosure containing automotive-type,

lead-acid batteries. These batteries, unlike sealed batteries, vent explosive hydrogen gas which can be

ignited by sparks from electrical connection.

•

When working on electrical equipment always ensure someone is nearby to help you in an emergency.

CAUTION!

•

Do not connect live AC power to the inverter’s AC outlets. The inverter will be damaged even if it is switched

OFF.

•

Do not expose the inverter to temperatures exceeding 40°C.

CAUTION! Do not use the inverter with the following equipment:

•

Small battery-operated products such as rechargeable flashlights, some rechargeable shavers, and

nightlights that are plugged directly into an AC receptacle to recharge.

•

Certain battery chargers for battery packs used in hand-powered tools. These chargers will have warning

labels stating that dangerous voltages are present at the charger’s battery terminals.

•

Note: DC voltage of battery should be connected with input DC voltage of power inverter (for example,

DC12V of battery connect with input voltage 12V of the inverter).

•

DON’T DISASSEMBLE OR MODIFY THE INVERTER BY YOURSELF.

PRECAUTIONS:

•

If connected directly to a battery or similar unit, please check the wires are connected correctly with regard to

the polarity.

•

Ensure that the incoming current does not exceed 15 volts.

•

Check that the plug and connections are tight at regular intervals. Loose connections can generate heat

and/or damage the inverter or the power source.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

Power Inverters

•

Improper use of the power inverter can cause injuries.

CAUTION:

•

The warranty will lapse in case the power inverter is used improperly.

Safety Features

•

Input protections: Polarity reverse (fuse broken)/Over and under voltage/Low battery alarm and shut down.

•

Output protections: Short circuit / Overload / Over temperature

•

With power ON/OFF switch and LED indicator

•

Input and output fully isolated

•

Lowe power consumption (standby)

•

LVD meets EN60950 and e8 mark

•

EMC meets EN61000-6-3, EN55022

Installation Environment

For safe and optimum performance, install the inverter in a location that is:

•

Dry. Do not expose to water drips or sprays.

•

Cool. Operate only in ambient temperatures between 0 to 40°C. Keep away from surface-heating vents or

other heat-producing equipment.

•

Well-ventilated. Allow at least 5cm of clearance above and on all sides of the unit for proper cooling and

ventilation.

•

Safe. Do not install the inverter in a compartment with batteries or flammable liquids, such as gasoline, or

explosive vapours.

•

Clean and free of dust and dirt. This is especially important if the inverter is used in a working environment.

Always select a suitable location.

Working Principle

The inverters work in two stages. During the first stage, the DC to DC converter increases the DC input voltage

from the power source (e.g. a 12-volt battery) to 300 DC volts. In the second stage, the high voltage DC is

converted to the watts you need (AC) using the advanced power MOSFET transistors or IGBT technology in a

full bridge configuration. The result is an excellent overload capability to operate difficult reactive loads.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

Power Inverters

Parts Identification

Note: this image is just a general reference. Product appearances may vary.

1. ON/OFF power switch

This switch turns the inverter ON/OFF.

2. Power indicator

When lit, it indicates the inverter has been turned ON and is ready for use.

3. Overload (Fault) indicator

If the LED overload is ON, it indicates that the inverter is in the state of warning or protection,

please stop using the inverter.

4. AC outlets

Output AC power. Please see the following image. Different countries have different sockets:

5. Battery connection posts

Connect the inverter to the battery, using the included connecting wire. Pay attention to polarity when

plugging the alligators to the battery. Read terminal is positive (+) and black terminal is negative (-).

6. High-speed cooling fan

The fans cool the internal circuits automatically, while the inverter is working.

7. Connecting wire

For connecting batteries with the inverter

8. A or B is available for selection

LED display to show the input voltage and the output power.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

Power Inverters

Spare Parts

Spare parts available for purchase, scan QR codes below:

QR Code SKU

PURESINE2500W

PURESINE1500W

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

Power Inverters

Power Supply

•

The power supply source needs to guarantee at least 10.5 volts to max. 15.0-volt DC and enough

permanent output to operate the unit.

•

The power supply source can be a battery or a similar DC power supply.

•

To establish the estimated necessary power supply (in amps), divide the respective output (in watts) of the

operated unit by the incoming voltage.

Connecting to the Power

•

Unpack the power inverter and ensure that the switch is at the OFF position.

Connections

•

The output of the user needs to be within the specifications of the power inverter.

•

Insert the plug into the socket of the power inverter.

•

Press the ON switch – the green LED will light up, and the unit will be operational.

•

The LED will turn OFF if the voltage drops below 10V and the power inverter switches off. Switch it OFF and

disconnect the plug.

•

CAUTION: Never draw power from the power inverter with a cable.

Fuse

The power inverter is fitted with a 40amp fuse. Defective fuses should be replaced with newer ones.

Power Inverter Position

•

No liquid should enter the unit.

•

Ambient temperature should be between 10 and 27°C. Do not place on or directly adjacent to a heat source.

•

Do not expose to direct sunlight.

•

Leave a space of 2 – 4cm to allow adequate air circulation.

•

Do not place any objects on top.

•

Do not use close to flammable materials or in places where flammable vapours or smoke can occur.

Connecting to the Vehicle Battery

•

It is recommended to run the vehicle’s motor for approximately 15 minutes every hour to avoid the battery

from discharging.

•

The power inverter can be operated when the motor is running or when the motor is at a standstill.

•

It is possible that the power inverter may not work due to the voltage drop during the starting process.

•

If not in use, remove the unit from the battery.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

Power Inverters

Alarm in Case of Voltage Drop

The power inverter switches OFF automatically when the voltage drops below 10 volts.

Malfunctions

Protective features of the power inverter

•

Low-voltage of the battery – may damage the battery but not the power inverter as it switches OFF. Once

the normal operating status is reinstated, the unit can be operated again.

•

Overload protection – if the incoming voltage exceeds 15 volts DC, or if the permanent output is exceeded,

the unit switches off automatically.

•

Short-circuit – if the wires are crossed or the unit has short-circuited, this usually causes the 15amp fuse to

get damaged. Disconnect the unit immediately from the power inverter and exchange the fuse.

•

Overheating protection – if the internal temperature exceeds 65°C, the unit will automatically switch OFF.

After cooling off for about 15 minutes, the unit can be switched ON again.

General Problems

The unit has started, but no permanent operation is possible.

•

Some inductive motors may require 2 – 6 start-up attempts. If the unit only runs at the moment in which the

power is supplier, switch the power inverter ON and OFF quickly and repeatedly.

Humming in music systems.

•

The loudspeakers of cheaper stereo systems may hum as they cannot filter the modified sinus waves that

the power inverter generates.

Malfunctions when operating a TV.

•

The power inverter is already screened, although there may be visible interference, especially if the TV

signal is weak. Try one of the following actions:

− Position the power inverter as far away as possible from the unit, the aerial and the aerial cable.

− Look for the best possible position for the aerial cable, the power cable, the TV and the power inverter.

− Use good quality aerial cables.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

Power Inverters

Troubleshooting

Problem Cause Recommendation

Low outgoing voltage



The power inverter is overloaded.



Incoming voltage is below 10.6

volts.



Reduce the outgoing output.



Ensure adequate incoming

voltage of over 10.6 volts.

NOTE: Use only RMS volt meters to

measure the outgoing voltage.

Battery power is too low



Poor condition of the battery.



Inadequate power supply or

inappropriate voltage drops.



Replace the battery.



Check the condition of the

cigarette lighter – clean or

replace.

No output.



The power inverter is not at

operating procedure.



Cigarette lighter requires power.



Battery voltage below 10 volts.



Power inverter has cut-off

automatically due to overheating.



The fuse has blown.



Switch the power inverter ON and

OFF again. If necessary, repeat

the process until the operated unit

starts.



Switch the ignition ON.



Charge or change the battery.



Allow the power inverter to cool

down. Ensure there is enough air

circulation.



Exchange the fuse. Check that the

wires are connected correctly

when connecting the power

inverters.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

Power Inverters

Specifications

PURESINE1500W

•

Continuous Power: 1500W

•

Peak Power: 3000W

•

Output Voltage and Frequency: 240V AC, 50Hz ±5%

•

Output Wave: Pure sine wave

•

Socket Type: Australian standard

•

Input Voltage: 12V

•

Static Current: <1.5A

•

Battery Low Alarm Protection: 10VDC ±0.5V or 20.5VDC±1V

•

Battery Low Shutdown Protection: 9.5VDC ±0.5V or 19.5VDC ±1V

•

Overload Protection: Shuts down output, re-power to reset

•

Over Voltage Protection: 15-16V

•

Over Temperature Protection: >60°C

•

Output Short Protection: Auto shut-off

PURESINE2500W

•

Continuous Power: 2500W

•

Peak Power: 5000W

•

Output Voltage and Frequency: 240V AC, 50Hz±5%

•

Output Wave: Pure Sine Wave

•

Socket Type: Australian Standard

•

Input Voltage: 12V

•

Static Current: <1.8A

•

Battery Low Alarm Protection: 10VDC±0.5V or 20.5VDC±1V

•

Battery Low Shutdown Protection: 9.5VDC±0.5V or 19.5VDC±1V

•

Overload Protection: Shuts down output, re-power to reset

•

Over Voltage Protection: 15-16V Over Temperature Protection: >60°C

•

Output Short Protection: Auto Shut-off

SINE2500W

•

Continuous Power: 2,500W

•

Peak Power: 5,000W

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

Power Inverters

•

Output Voltage and Frequency: 240V AC, 50Hz±5%

•

Output Wave: Modified sine wave

•

Socket Type: Australian standard

•

Input Voltage: 12V

•

Static Current: <1.5A

•

Battery Low Alarm Protection: 10VDC±0.5V or 20.5VDC±1V

•

Battery Low Shutdown Protection: 9.5VDC±0.5V or 19.5VDC±1V

•

Overload Protection: Shuts down output, re-power to reset

•

Over Voltage Protection: 15-16V

•

Over Temperature Protection: >60° C

•

Output Short Protection: Auto Shut-off

Note: Although most appliances run well on modified sine wave, some can be damaged by it. Modified sine-

wave inverters are economic solutions, but if uncertain as to whether it'll damage your equipment, please check

with the manufacturer of whatever you want to plug in.

PURESINE600W

•

Pure sine wave, ideal for sensitive electronics

•

Latest iGBT inverter technology

•

Powers 220/240V devices from 12V sources

•

Continuous output of 600W

•

Peak output of 1200W

•

Australian-standard power point

•

Low-battery alarm and safety shutdown

•

Short-circuit protection

•

Overload, over-voltage, overheat protection

•

40A fuse

•

EMC and C-tick Australian safety approval

•

12-month Australian warranty

PURESINE2000W

•

Continuous Power: 2000W

•

Peak Power: 4000W

•

Output Voltage and Frequency: 240V AC, 50Hz±5%

•

Output Wave: Pure Sine Wave

•

Socket Type: Australian Standard

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

Power Inverters

•

Input Voltage: 12V

•

Static Current: <1.8A

•

Battery Low Alarm Protection: 10VDC±0.5V or 20.5VDC±1V

•

Battery Low Shutdown Protection: 9.5VDC±0.5V or 19.5VDC±1V

•

Overload Protection: Shuts down output, re-power to reset

•

Over Voltage Protection: 15-16V Over Temperature Protection: >60°C

•

Output Short Protection: Auto Shut-off

•

Note - Not to be used with microwaves, LED's and Fluro Lights

PURESINE1000W

•

Continuous Power: 1,000W

•

Peak Power: 2,000W

•

Output Voltage and Frequency: 240V AC, 50Hz±5%

•

Output Wave: Pure sine wave

•

Socket Type: Australian standard

•

Input Voltage: 12V

•

Static Current: <1.0A

•

Battery Low Alarm Protection: 10VDC±0.5V or 20.5VDC±1V

•

Battery Low Shutdown Protection: 9.5VDC±0.5V or 19.5VDC±1V

•

Overload Protection: Shuts down output, re-power to reset

•

Over Voltage Protection: 15-16V

•

Over Temperature Protection: >60°C

•

Output Short Protection: Auto shut-off

PURESINE300W

•

Continuous Power: 300W

•

Peak Power: 600W

•

Output Voltage and Frequency: 240V AC, 50Hz±5%

•

Output Wave: Pure Sine Wave

•

Socket Type: Australian Standard

•

Input Voltage: 12V

•

Static Current: <0.6A

•

Battery Low Alarm Protection: 10VDC±0.5V or 20.5VDC±1V

•

Battery Low Shutdown Protection: 9.5VDC±0.5V or 19.5VDC±1V

•

Overload Protection: Shuts down output, re-power to reset

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

Power Inverters

•

Over Voltage Protection: 15-16V

•

Over Temperature Protection: >60°C

•

Output Short Protection: Auto Shut-off

•

Fuse: 40A

PURESINE3000W

•

Continuous Power: 3000W

•

Peak Power: 6000W

•

Output Voltage and Frequency: 240V AC, 50Hz ±5%

•

Output Wave: Pure sine wave

•

Socket Type: Australian standard

•

Input Voltage: 12V

•

Static Current: <2A

•

Battery Low Alarm Protection: 10VDC ±0.5V or 20.5VDC±1V

•

Battery Low Shutdown Protection: 9.5VDC ±0.5V or 19.5VDC ±1V

•

Overload Protection: Shuts down output, re-power to reset

•

Over Voltage Protection: 15-16V

•

Over Temperature Protection: >60°C

•

Output Short Protection: Auto shut-off

PURESINE5000W

•

Continuous Power: 5000W

•

Peak Power: 10000W

•

Output Voltage and Frequency: 240V AC, 50Hz±5%

•

Output Wave: Pure Sine Wave

•

Socket Type: Australian Standard

•

Input Voltage: 12V

•

Static Current: <2A

•

Battery Low Alarm Protection: 10VDC±0.5V or 20.5VDC±1V

•

Battery Low Shutdown Protection: 9.5VDC±0.5V or 19.5VDC±1V

•

Overload Protection: Shuts down output, re-power to reset

•

Over Voltage Protection: 15-16V

•

Over Temperature Protection: >60°C

•

Output Short Protection: Auto Shut-off

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of

serious injury or death, refer to the information below. For more information,

see www.datastreamserver.com/safety



Consult all documentation, packaging,

and product labelling before use. Note

that some products feature

documentation available online. It is

recommended to print and retain the

documentation.



Before each use, check the product for

loose/broken/damaged/missing parts,

wear, or leaks (if applicable). Never use a

product with

loose/broken/damaged/missing parts,

wear, or leaks.



Products must be inspected and serviced

(if applicable) by a qualified technician

every 6 months. This is based on

average residential use by persons of

average size and strength, and on a

property of average metropolitan size.

Use beyond these recommendations may

require more frequent

inspections/servicing.



Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed

access to the product.



The product has been supplied by a general merchandise

retailer that may not be familiar with your specific

application or description of application. Be sure to attain

third-party approval from a qualified specialist for your

application before use, regardless of any assurances from

the retailer or its representatives.



This product is not intended for use where fail-safe

operation is required. As with any product (for example,

automobile, computer, toaster), there is the possibility of

technical issues that may require the repair or

replacement of parts, or the product itself. If the possibility

of such failure and the associated time it may take to

rectify could in any way inconvenience the user, business,

or employee, or financially affect the user, business, or

employee, then the product is not suitable for your

requirements. This product is not intended for use where

incorrect operation or a failure of any kind, including but

not limited to, a condition requiring product return,

replacement, parts replacement, or service by a

technician may cause financial loss, loss of employee

time or an inconvenience requiring compensation.



If this product has been purchased in error when

considering the information presented here, contact the

retailer directly for details of their returns policy, if

required.

ideas, diagrams, or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning, or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

GENPOWER PURESINE2500W Pure Sine Wave Inverter 2500W 12V

Product's Documents

Product manual

Specifications

GENPOWER PURESINE2500W Questions and Answers