Loading ...
Loading ...
Loading ...
LINE IN
BAL
R
L
The output marked Line Out allows for daisy chaining of signals from one RPG unit to an-
other. Simply attach an XLR to XLR or ¼˝ TRS to XLR (RPG8) cable between the two units
to share signals. The input into RPG #2 should go to the Line In port. Additionally you can
use this output to connect a subwoofer.
Line Out Balanced Connection.
LINE IN
BAL
R
L
When setting up for larger venues, a mixing console becomes a critical piece of equip-
ment for appropriately mixing signals from multiple inputs such as singers, speakers,
effects devices, musicians and of course allows for multiple speaker utilization.
To connect a mixing console begin by:
1. Make sure the RPG's power switch is in the OFF position.
2. Turn Master Volume to 0 position.
3. Turn MIC IN BAL Volume to 0 position.
4. Connect the LEFT OUTPUT of mixer to the LINE IN XLR connection of your Left RPG Unit.
5. Connect the RIGHT OUTPUT of mixer to the LINE IN XLR connection of your Right RPG Unit.
6. Switch ON your RPG unit.
7. Slowly raise the level of the mixer output to the 0dB level position.
8. Slowly turn the LINE IN gain control clockwise until the CLIP LED indicator
begins to blink, then turn it down slightly. This indicates the maximum input voltage gain
is matched and set properly.
9. Turn Master Volume up to achieve proper volume.
Public Address / Concert Mixer Setup
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...