Loading ...
Loading ...
Loading ...
• High-power 2-way pro sound reinforcement speaker system for live sound and
playback applications
• Compact and light weight system delivers distortion free sound even at extreme SPL
• Linear Class AB amplier technology: high power, transparent sonic performance
• Internal switch-mode power supply for low distortion audio with superior transient response
• Built-in bass and treble equalization processor for ultimate system control and speaker protection
• State-of-the-art 1.75˝ Japanese made pure titanium-diaphragm compression driver for
crystal clear high-frequency reproduction
• Ultra-wide dispersion, 40° large-format horizontal wave guide horn molded directly into cabinet
• Ultra-low noise Mic/Line input via XLR & 1/4˝ TRS jack with volume control
• Line RCA and XLR input with separate Gain adjustment
• Additional balanced line output via XLR & 1/4˝ TRS jack for linking of additional speaker systems
• Versatile trapezoidal enclosure design allows different positioning
• Flyable and stand mounting with 35mm pole socket
• Tilts on its side for use as a oor monitor with included brackets
• Ergonomically shaped handle for easy carrying and setup
• High-quality components and exceptionally rugged high impact ABS construction
• Amplier clip limit LED indicator & power LED cabinet rear
• Front display power meter Blue LED
• 115/230 Volt switchable power supply with external user serviceable fusing
Your RPG is set up to produce the full spectrum of sound from its woofer and tweeter
horn combination. The lower frequencies seek out the oor of the room they are playing
and travel along the oor and walls. The tweeter horn is more directional. Hence when
setting up your system its more important to make sure that the tweeter horns are not
blocked by any furniture and are located / aimed at ear level to the listening audience.
Woofer aiming is not as critical as explained previously due to the nature of the woofer
sounds able to travel through various paths even when blocked.
It is therefore recommended that when setting up your system you set up your speak-
ers on speaker stands, such as the Rockville model RVSS-2 (not included) so that the
tweeter sounds will radiate above the listening crowd. This will guarantee optimum sound
dispersion and achieve clear vocal sound reproduction.
The placement of your microphone is critical in avoiding feedback through your RPG
system. Never set up your microphone in front of the speaker. Always set up your micro-
phone behind the speaker. When approaching the speaker to make any adjustments, we
recommend approaching the speaker from the rear and not walking directly towards the
front of the speaker.
Your RPG speaker comes standard with two brackets which snap in to the cabinet sides
allowing it to be placed on the oor at an angle as a stage monitor. Unlike a PA setup
which face the crowd, stage monitors are set up to face the performer on stage and to
direct the sound towards them. This presents a particular problem as now feed back may
occur. To avoid stage monitor feedback the following precautions should be taken.
Setting Up Your RPG Professional Sound System
How To Avoid Irritating Feedback
Stage Monitor Setup
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...