Loading ...
Loading ...
Loading ...
19
RolliBot RolliCOOL 208-20 Portable AC User Manual
2. Remove the cap from the opening and connect the drainage pipe to the unit via the opening.
If the drainage pipe is too sti and/or cannot be attached, try soaking the end in hot water to soften it rst.
3. Allow the water to drain.
After draining is complete, it is recommended to turn the unit on and run it in Fan Mode at the lowest speed for at least two
hours in order to ensure the Drainage Pipe dries inside.
4. Detach the pipe and reinstall the cap.
Section 7. Storage
Store your RolliCool 310-20 in a dry, indoor environment. Properly storing your RolliCool will
help improve performance and expectancy.
Step 1. Turn the AC unit o.
Step 2. Remove the exhaust pipe and window kit as needed for storage with the unit.
Step 3. Drain the unit of any water and ensure all parts are completely dry.
Step 4. Turn the unit on and run it in fan mode at the lowest speed for at least two hours in
order to ensure the inner reservoir is dried inside.
Step 5. Turn o the unit and install the power cord’s plug into its xture on the back of the unit.
• Always turn the unit o before transporting or storing.
• Cover the unit to protect it from dust. Do not store in a dusty environment. As with all electronic devices, dust may cause
damage over time.
• Store the unit indoors at a dry and stable temperature. Do not store in an unheated garage, shed, or other locations with
extreme temperature uctuations.
Loading ...
Loading ...
Loading ...