Loading ...
Loading ...
Loading ...
17
RolliBot RolliCOOL 208-20 Portable AC User Manual
5.3 – Cool Mode
With this mode, the unit will turn on and regulate
temperature as selected.
1. Press the power button on the control panel.
2. Press the mode button on the control panel until
the display’s COOL light turns on.
3. Use the up and down buttons to set the desired
temperature 62~86°F (16~30°C).
4. Use the speed button to switch between fan
speeds.
You must attach the drainage hose to the upper draining opening
when using cool mode.
In cool mode, the unit will not turn on if the chosen temperature is higher than
the indoor temperature.
5.4 – Dehumidify Mode
With this mode, the unit will turn on and begin removing moisture from the air.
1. Connect the drainage hose to the upper drainage opening. Set a container near the unit to
collect the water (if needed). Then place the end of the drainage pipe in the container.
2. Press the power button on the control panel.
3. Press the mode button on the control panel until the display’s DEHUM light turns on.
You must attach the drainage hose to the upper draining opening when using dehumidify mode.
In dehumidify mode, the fan speed is automatically set to low and cannot be adjusted.
Loading ...
Loading ...
Loading ...