Loading ...
Loading ...
Loading ...
7
Make sure you have all the necessary screws and brackets. There
should be ve brackets and one bag of screws. If any of these items are
missing, please contact Rockville.
Before you begin please make sure you have the proper tools and necessary accessories.
For this installation you will need the following items:
• mounting brackets and screws (included)
• wall hooks (optional, not included)
• speaker cable (included)
• drill
• Phillips screw driver
Using two screws, secure one bracket to the
back of each speaker you wish to mount. If you
are mounting the speakers horizontally, you will
need to use two brackets for each speaker.
Now mark on the wall the place where you will be mounting your speak-
ers. Use the diagram from the POSITIONING THE SPEAKERS section
to determine the best location. Both front speakers should be at the
same height; the same goes for the satellite units. Remember to keep
speakers at least two feet away from corners, and make sure you have
enough wire to reach the mounting location.
You can use a screw or a mounting hook to hang the speaker. Use a
screw with a drywall insert or drive it into a wall stud to ensure that it is
securely fastened to the wall. Use a stud nder to locate the stud and
to make sure that there are no wires or cable lines located in that area.
Once the mounting hooks or screws are in place, you are ready to begin
mounting. Be sure to wire each speaker before mounting it to the wall.
MOUNTING INSTRUCTIONS
Loading ...
Loading ...
Loading ...