FLUKE 1586A/1HC/C User Manual for the Fluke 1586A/1HC/C Super-DAQ Precision Temperature Scanner with high-capacity module

Loading ...

Maintenance and Care

Introduction 6

6-3

Introduction

This section supplies information on how to clean the Product, reset the memory, and

replace the fuse in the rear of the Product.

Clean the Product

To clean the Product, wipe the instrument with a cloth that is lightly dampened with

water or mild detergent. Do not use aromatic hydrocarbons, chlorinated solvents, or

methanol based fluids.

Replace the Fuse

The Product has a product fuse that protects from overcurrent. Each voltage selection

requires a specific fuse. See Table 6-1.

Warning

To prevent possible electrical shock, fire, or personal injury,

use only specified replacement parts.

Table 6-1. Fuses

Voltage Selector Fuse Fluke Part Number

100 V 0.25 A, 250 V (slow blow) 166306

120 V 0.25 A, 250 V (slow blow) 166306

220 V 0.125 A, 250 V (slow blow) 166488

240 V 0.125 A, 250 V (slow blow) 166488

To replace the fuses (see Figure 6-1):

1. Disconnect the mains-power cord from the power-entry module.

2. Open the power entry module and remove the fuse holder.

3. Replace the fuses with exact replacements as listed in Table 6-1.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 1586A/1HC/C Super-DAQ Precision Temperature Scanner with high-capacity module