Loading ...
Loading ...
Loading ...
Installation and connection en-us
7
The subfloor must be sufficiently stable to bear the weight
of the appliance.
Over-and-under and side-by-side installation
If you want to install 2 refrigerating appliances one over
the other or side by side, you must maintain a clearance of
at least 150mm between the appliances. Selected appli-
ances can be installed without a minimum clearance. Ask
your dealer or kitchen planner about this.
4.3 Installing the appliance
▶ Install the appliance in accordance with the enclosed in-
stallation instructions.
4.4 Preparing the appliance for first use
1. Remove the information material.
2. Remove the protective film and transit bolts, e.g. re-
move the adhesive strips and cardboard.
3.
Clean the appliance for the first time. →
Page20
4.5 Connecting the appliance to the drinking
water connection
Requirements
¡ A shut-off valve must be installed on the water connec-
tion and be freely accessible following installation of the
appliance.
¡ Ensure that the water coming from the water connection
is potable.
1. Rinse the drinking water connection thoroughly until the
drinking water is no longer cloudy and contains no de-
posits.
If the drinking water is still cloudy or contains deposits,
install an external water filter system.
2. Install the drinking water connection according to the
enclosed installation instructions.
4.6 Connecting the appliance to the electric-
ity supply
1. Insert the non-heating appliance plug of the power cord
into the appliance.
2. Insert the power plug of the appliance's power cord in a
socket outlet nearby.
The connection data of the appliance can be found on
the rating plate.
→"Appliance", Fig.
1 /
8
,
Page9
3. Check the power plug is inserted properly.
a The appliance is now ready to use.
Loading ...
Loading ...
Loading ...