Loading ...
Loading ...
Loading ...
en-us Water system
18
Changing the water filter or replacing it with a
bypass cap
1. Reach into the recess below the filter cover, pull it for-
ward slightly
and then down to the left .
2. Pull the water filter down to the left , turn it counter-
clockwise by 90° and remove it .
‒ Remove the water filter with care as it is under pres-
sure.
Note:When removing it, a small amount of water may
drip out of the water filter. Remove the drips of water
with a dry cloth.
Tip:You can dispose of the old water filter with your
household garbage.
3. Insert the new water filter or the bypass cap all the way
into the filter opening, turn it 90° clockwise all the way
and fold it up to the right.
4. Move the filter cover up to the right and slide it back all
the way.
5. Discard the ice cubes produced during the first
24hours, and dispense water for 5minutes and dis-
card.
13.2 Ice and water dispenser
Use the ice and water dispenser to dispense ice cubes,
crushed ice and chilled water.
To achieve maximum ice cube production of up to 12lbs
(5.4kg) within a period of 24 hours:
¡ Set the freezer compartment to the coldest temperature.
¡ Empty the ice storage container every 3 hours.
The quantity of ice cubes produced can vary due to the
following conditions:
¡ How often the appliance is opened
¡ Amount of food stored
¡ Ambient temperature and ambient humidity
¡ Water pressure and condition of the water filter
Note:The ice and water dispenser is locked when the ap-
pliance door is open.
Using the ice and water dispenser
Notes
¡ Ice cube production starts as soon as the appliance is
switched on and the freezer compartment has reached
the set temperature.
¡ As soon as the freezer compartment reaches the set
temperature, the first batch of ice cubes will be ready in
approximately 4hours.
¡ Once the appliance has been connected or a new water
filter has been installed, there will be air in the water
system.
Requirement:The appliance is connected to the drinking
water connection.
1. Keep dispensing water until it contains no more air bub-
bles.
Remove any splashes of water with a dry cloth.
2. For hygiene reasons, dispense water for 5minutes and
discard.
3. For hygiene reasons, discard the ice cubes produced
within the first 24hours.
Dispensing ice or water
▶ Press the required selection option
and press the
glass against the dispensing button .
Tip:Hold the glass directly under the dispenser open-
ing.
Notes
¡ After a while of continuous dispensing, the ice or wa-
ter stops being dispensed. Wait a few seconds before
dispensing ice or water again.
¡ After ice or water has been dispensed several times
consecutively, it stops being dispensed. Wait a few
minutes before dispensing ice or water again.
¡ When changing from
to , a few ice
cubes may be released the next time you dispense.
¡ When changing from to , a small
amount of crushed ice may be released the next time
you dispense.
Loading ...
Loading ...
Loading ...