Loading ...
Loading ...
Loading ...
en-us Cleaning and maintenance
20
15.2 Cleaning the appliance
WARNING
Moisture intrusion may cause an electric shock.
▶ Do not use any steam cleaners or high-pressure clean-
ers to clean the appliance.
NOTICE:
Unsuitable cleaning agents may damage the surfaces of
the appliance.
▶ Do not use hard scouring pads or cleaning sponges.
▶ Do not use strong or abrasive cleaning agents.
▶ Do not use cleaning agents with a high alcohol content.
▶ Do not use stainless-steel cleaning agents on the out-
side of the appliance.
If you clean fittings and accessories in the dishwasher, this
may cause them to become deformed or discolor.
▶ Never clean fittings and accessories in the dishwasher.
1.
Prepare the appliance for cleaning. →
Page19
2. Clean the inside of the appliance, the outside of the ap-
pliance, the fittings, the accessories and the door seals
with a dish cloth, lukewarm water and a little pH-neutral
detergent.
3. Dry thoroughly with a soft, dry cloth.
4. Insert the fittings and install the appliance components.
5. Connect the appliance to the electricity supply.
→
Page7
6.
Switch on the appliance. →
Page13
7. Put the food into the appliance.
15.3 Cleaning the drip tray
Regularly check the drip tray for water spillages and clean
as necessary.
1. Press down on the top right corner of the drip grate
and remove it .
2. Wipe out the drip tray with a sponge or absorbent cloth.
15.4 Removing the fittings
If you want to clean the fittings thoroughly, remove these
from your appliance.
Removing the shelf
▶ Lift the shelf
and remove it .
Removing the door rack
▶ Lift the door rack and remove it.
Removing the storage container
1. Pull the storage container out all the way.
Loading ...
Loading ...
Loading ...