Loading ...
Loading ...
Loading ...
Rinnai 4 HW_CF OIM
REGULATORY INFORMATION
Your Rinnai Continuous Flow water heater has been certied by the Australian Gas Association.
The A.G.A. Certication Number is shown on the data plate.
This Appliance must be installed correctly by an authorised person� The installation of gas, water, and electricity
must conform to local regulations�
The installation must also comply with the instructions supplied by Rinnai�
All dimensions referred to in these instructions are in millimetres, unless otherwise specied.
Please keep this instruction booklet in a safe place for future reference�
Notice to Victorian Consumers
This appliance must be installed by a person licensed with the Plumbing Industry Commission�
Only a licensed person will have insurance protecting their workmanship�
So make sure you use a licensed person to install this appliance and ask for your Compliance Certicate. For
Further information contact the Plumbing Industry Commission on 1300 815 127�
WARNING ABOUT HOT WATER
Hot water can cause scalding. Those most at risk are children and disabled, elderly and
inrm persons. (65°C water can severely burn a child in half a second).
Rinnai have water heater models which limit the delivery temperature to 50°C which
signicantly reduces the scald hazard. Temperature limiting devices may also be able to be
tted. Contact Rinnai for further information.
Always test the water temperature before use, such as when lling a bath or basin or entering
a shower, to ensure it is suitable for the application and will not cause scald injury.
Always supervise children whenever they are in the bathroom or near other sources of hot
water. Ensure any hot water taps are closed rmly after use.
WARNINGS & IMPORTANT INFORMATION
Loading ...
Loading ...
Loading ...