Hikvision IDS-E04HQHI-XD User Manual

Loading ...

Range [1s-10s], the threshold for the me of the object loitering in the region. When the

duraon of the object in the dened detecon area is longer than the set me, the alarm

will be triggered.

3) Oponal: Set Detecon Target as Human or Vehicle to discard alarms which are not triggered

by human body or vehicle.

Note

This funcon is only available for certain models.

4) Click Max. Size and draw a quadrilateral in the preview window to set the maximum draw

area size of the target.

5) Click Min. Size and draw a quadrilateral in the preview window to set the minimum draw area

size of the target.

6) Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes of

the detecon region.

Set the arming schedule. Refer to Congure Arming Schedule for details.

Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.

Click Apply.

Region Entrance Detecon

For certain network cameras, region entrance detecon funcon detects people, vehicles or other

objects which enter a pre-dened virtual region from the outside place, and some certain acons

can be taken when the alarm is triggered.

Steps

Go to Conguraon → Event → Smart Event → Region Entrance .

Set Camera.

Turn on Enable.

Oponal: Check Save VCA Picture to save the captured pictures of VCA detecon.

Set the detecon rules and detecon areas.

1) Set Arming Area. Up to 4 arming areas are selectable.

2) Adjust Sensivity. Sensivity: Range [0-100]. The higher the value is, the more easily the

detecon alarm can be triggered.

3) Oponal: Set Target Detecon as Human or Vehicle to discard alarms which are not triggered