Loading ...
Loading ...
Loading ...
Reset to factory settings
You can reset to the factory settings (default settings upon purchase) when you want to delete all
pairing information in the earphones.
1 Put both earphones (L and R) into the charging cradle and charge for about 15 minutes.
2 Take out earphone (R) from the charging cradle and wear it.
3 When you hear the startup sound of earphone (R), touch and hold touch sensor (R). (Do not
release your finger even when you hear the message.)
4 When you hear the pairing sound (melody) from earphone (R), release your finger from
touch sensor (R).
R To listen to the pairing sound, click {{"Here"|tolink("https://eww.pavc.panasonic.co.jp/
avcacc/technics/sound-data/Pair_const.wav")}}.
R If you do not hear the pairing sound even after touching for about 10 seconds, start over
from step 1.
5 Touch and hold touch sensor (R) again until you hear the completion message.
R Resetting earphone (R) is complete when you hear the completion message.
6 Put earphone (R) back into the charging cradle.
7 Repeat steps 2 to 6 above for earphone (L).
Note:
R To pair a Bluetooth
®
device with the earphones again, delete the pairing information (device
name) on the Bluetooth
®
device that was paired with the earphones, and then pair the
earphones with the Bluetooth
®
device again.
“Use the app to pair with a Bluetooth
®
device”, Page 23
“Pair with a Bluetooth
®
device without the app”, Page 24
R Some settings such as the language settings for voice prompt and Amazon Alexa are not
reset.
R You can use the [Technics Audio Connect] app to reset to the factory settings (default settings
upon purchase).
“Reset the headphones to factory settings”, Page 43
Maintenance
Maintenance
R Wipe with a soft, dry cloth.
R Remove the earpieces from the earphones and remove any earwax or dust. (Do not touch the
protective mesh because it affects the audio characteristics.)
55
FAQ
Loading ...
Loading ...
Loading ...