Loading ...
Loading ...
Loading ...
Problem Cause Action
There is loss of power. The product is operated at too high
forward or rearward speed when you
cut grass.
Use slower speed.
The throttle control is in the choke
position.
Put the throttle control in the fast po-
sition.
There is build-up of grass, leaves or
unwanted material under the cutting
deck.
Clean the cutting deck.
The air filter is dirty. Clean or replace the air filter.
The engine oil level is too low. Do a check of the engine oil level. Fill
with engine oil if it is necessary.
The engine oil is dirty. Replace the engine oil.
The spark plug is damaged. Replace the spark plug.
The fuel filter is dirty. Replace the fuel filter.
The fuel in the fuel tank is bad. Replace the fuel in the fuel tank.
There is water in the fuel. Remove all fuel from the fuel tank
and the carburetor. Fill the fuel tank
with new fuel and replace the fuel fil-
ter.
The spark plug wire is loose. Connect and tighten the spark plug
wire.
The air intake or the cooling fins on
the engine are blocked.
Clean the air intake and the cooling
fins on the engine.
The muffler is clogged or damaged. Clean or replace the muffler.
There is loose or damaged wiring. Do a check of all wiring.
The engine valves are not adjusted
correctly.
Speak to an approved service agent.
There is vibration in the product. The blades are loose. Tighten bolts on the blades.
One or more of the blades are dam-
aged or not balanced.
Balance the blades or replace the
blades.
The engine is loose. Tighten the engine bolts.
The battery does not charge. The main fuse is damaged. Replace the main fuse.
The battery is damaged. Replace the battery.
The charging cable is disconnected. Connect the charging cable.
The connection at the cable connec-
tors on the battery terminals is bad.
Do a check of the battery connec-
tions.
The engine operates when the oper-
ator gets up from the seat when the
cutting deck is engaged. The operator presence control (OPC)
does not operate correctly.
Do a check of the wires, switches
and connections. If not corrected,
speak to an approved service agent.
Do not use a product with an oper-
ator presence control that does not
operate correctly.
32 2235 - 002 - 22.09.2023
Loading ...
Loading ...
Loading ...