Loading ...
Loading ...
Loading ...
3. To start movement, slowly push down on the forward
drive pedal (A) or the reverse drive pedal (B).
A
B
Note: The forward and reverse drive pedals go
back to neutral position when they are not pushed
down.
4. Push down more on the forward drive pedal or the
reverse drive pedal to increase the speed.
To engage and disengage the parking
brake
1. To engage the parking brake, push down the brake
pedal (A) fully to the lowest position.
B
A
2. With the brake pedal pushed down, pull up the
parking brake lever (B).
3. Release the brake pedal.
4. Release the parking brake lever.
Note:
Make sure that the parking brake holds the
product safely.
5. To release the parking brake, push down the brake
pedal.
To stop the product
WARNING: Always stop the product,
engage the parking brake and remove the
ignition key before you go away from the
product.
CAUTION: The exhaust gas from the
warm engine can cause burn damage to
the grass. To prevent burn damage , to the
grass, always stop the engine when you
stop the product on grass areas.
1. Push down on the brake pedal (A) fully until the
product stops fully.
A
2. Disengage the cutting deck. Refer to
To engage and
disengage the cutting deck on page 16
.
3. Put the throttle control in the slow position and let the
engine operate at idle speed for some minutes.
4. Put the cutting deck in the transport position. Refer
to
To set the cutting deck in transport position or
mow position on page 14
.
5. Turn the ignition key to the "STOP" position and
remove the ignition key from the ignition.
To use the throttle control
The operating efficiency of the engine decreases when
the engine operates at less than full speed. Full speed
gives the best mower performance.
2235 - 002 - 22.09.2023
15
Loading ...
Loading ...
Loading ...