Loading ...
Loading ...
Loading ...
Troubleshooting
Problem Cause Action
The engine does not start. There is no fuel in the fuel tank. Fill the fuel tank.
The throttle control is not in the cor-
rect position.
Refer to the start instructions.
The spark plug is damaged. Replace the spark plug.
The air filter is dirty. Clean or replace the air filter.
The fuel filter is clogged. Replace the fuel filter.
There is water in the fuel. Remove all fuel from the fuel tank
and the carburetor. Fill the fuel tank
with new fuel and replace the fuel fil-
ter.
The wires are loose or damaged. Do a check of all wires.
The engine valves are not adjusted
correctly.
Speak to an approved service agent.
The engine is flooded. Wait 2–3 minutes before you try to
start the engine again.
The fuel in the fuel tank is bad. Replace the fuel in the fuel tank.
The starter motor does not turn the
engine over.
The battery is too weak. Charge the battery.
The attachment clutch control is en-
gaged.
Disengage the attachment clutch
control.
The clutch/brake pedal is not pushed
down fully.
Push down the clutch/brake pedal
fully when you start the engine.
The connection at the cable connec-
tors on the battery terminals is bad.
Do a check of the battery connec-
tions.
The main fuse is damaged. Replace the main fuse.
The ignition lock is damaged. Speak to an approved service agent.
The safety connector for clutch/brake
pedal is damaged.
Speak to an approved service agent.
The starter motor or the solenoid is
damaged.
Speak to an approved service agent.
The operator presence control (OPC)
does not operate correctly.
Do a check of the wires, switches
and connections. If not corrected,
speak to an approved service agent.
Do not use a product with an oper-
ator presence control that does not
operate correctly.
30 2235 - 002 - 22.09.2023
Loading ...
Loading ...
Loading ...