Loading ...
Loading ...
Loading ...
Install the battery to power the sensor.
Press and hold the reset button for 5 seconds to factory reset the
sensor, the LED light will turn red and flash in blue, indicating en-
tering Zigbee pairing mode. It will exit Zigbee pairing mode after 3
min if not paired.
Add the sensor to your Zigbee hub/smart bridge/Echo speaker with
built-in Zigbee hub according to the corresponding instructions.
Supports Amazon Echo(speaker with built-in Zigbee smart home
hub: Echo Plus2/Echo V4/Echo Studio/Echo Plus1), SmartTings
(2015/2018/Station/ Aeotec smart hub), Home Assistant (ZHA&Z2M
with Zigbee dongle), Hubitat(Elevation with Zigbee hub), ThirdRe-
ality (Smart Hub / Smart Bridge), Homey(bridge/Pro), etc., support
Matter supported ecosystems like Apple Home, Google Home etc.
via ThirdReality Smart Bridge.
Set up the device and hub first, then install it, then install it on the inside
of the top panel of your garage door..
Recommanded
Setup
1.
2.
3.
03
Loading ...
Loading ...
Loading ...