Loading ...
Loading ...
Loading ...
27
Replacing the Oven Lights
CARE AND MAINTENANCE
REPLACING THE OVEN LIGHTS
To prevent electrical shock or injury, make sure the oven and light bulbs are cool and
power to the oven has been turned off before replacing light bulbs.
To replace the two G9 halogen light bulbs located at the upper
left and right corners of the oven, unscrew the protection cap that
projects out inside the oven.
NOTE: Touching the bulb with your fingers may cause the bulb to burn out. We
recommend using protective gloves or a clean cloth for this process.
CLEANING YOUR RANGE
WARNING
Do not attempt any of the following cleaning methods until all burners are off
and the oven is completely cool. We also recommend disconnecting power
before cleaning the unit to limit risk of electric shock.
IMPORTANT: During cleaning, never use abrasive cleaners. Scratches on the stainless
steel surfaces are permanent. DO NOT clean the range when hot. Do not use Clorox
bleach wipes or alcohol wipes to clean any part of the stainless steel. Always follow label
instructions on cleaning products.
CONTROL KNOBS
• Use a damp soapy cloth for everyday cleaning of the knobs. For heavier cleaning for
grease, etc., apply a nonabrasive liquid detergent to a damp cloth.
• Use care not to rotate the knobs when cleaning to avoid the release of gas.
• For hard-to-reach stains, you can remove knobs by gripping them and carefully pulling
them straight out. Clean and dry knobs completely before replacing, using care to put
knobs on the correct valves where they were removed.
• Make sure knobs are completely dry before using the range.
Loading ...
Loading ...
Loading ...