Loading ...
Loading ...
Loading ...
16
SURFACE BURNER OPERATION
1. To activate electric ignition for surface burners, push in the knob for the burner you wish
to use
release gas, as noted in the first image below.
2. Turn the control knob counter-clockwise to the “HI” position, as noted in the second
image below.
The spark will be released at the metal electrode of the white ceramic
spark tip located on the side of the burner. Wait 0.5 to 2 seconds for ignition.
3. Once the burner lights, turn the control knob to adjust the desired heat. If the flame turns
off and does not auto re-ignite, turn the burner off and repeat the above procedure.
WARNING
Use care when utilizing the cooktop and oven knobs on your range. Turning
knobs to far beyond their highest setting — or turning too hard in the incorrect
clockwise motion — may permanently damage knobs.
USING THE BURNERS CORRECTLY
1. Always check that the burner caps are
properly installed before operation:
2. Verify that the flame of the range top
burners is completely blue and with a
regular aspect as shown at right:
3. Never let flames wrap around cookware;
this creates a safety hazard and can also
damage your cookware:
WARNING
DO NOT ignite burners if the black burner cap is not installed or not centered
on the burner spread; the flame will be irregular and may increase injury risk.
A
B
A
B
Correct
Incorrect
A
B
Correct Incorrect
Cooktop Operation
OPERATION
Loading ...
Loading ...
Loading ...