Loading ...
Loading ...
Loading ...
1
Introduction
The Fluke Ti9, Ti10, Ti25, TiRx, TiR, and TiR1 Thermal Imagers (hereafter
“the Imager”) are handheld imaging cameras used for predictive maintenance,
equipment troubleshooting, and verification. All these Imagers produce
thermal and visual images on a 640 X 480 display. Thermal and visual images
are displayed on the Imager LCD and can be saved to an SD Memory card.
Transferring images to a PC is accomplished by removing the SD memory
card and connecting it to a PC through the included card reader. SmartView
®
software is included for image analysis and report generation from these saved
images.
Thermal and visual images can be presented simultaneously as a full thermal
image or as a Picture-In-Picture (PIP) image. The thermal image temperature
range starts at -20 °C, and goes up to +100 °C for the TiRx, TiR and TiR1,
+250 °C for the Ti9 and Ti10 and +350 °C for the Ti25. The thermal image
can be displayed using any one of a number of color palettes, depending on the
model.
Imager power is supplied by a rechargeable Nickel Metal-Hydride battery. For
Imagers that support IR-Fusion
®
, a full visual image (640 X 480) can be
displayed and stored with each IR image.
In addition to the features mentioned above, the Ti25 and TiR1 provide voice
recording for annotating saved images.
The Fluke Ti9 and TiRx Thermal Imagers have the same basic specifications
and operation as the Ti10 and TiR imagers, respectively, but without
IR-Fusion
®
or visible image capabilities. They operate in full-time thermal
image mode. Both the Ti9 and TiRx Thermal Imagers can be upgraded to a
Ti10 or TiR, respectively, to include the IR-Fusion
®
and visible image features.
Please contact Fluke or your local Fluke representative for more information
and pricing for this upgrade.
Note
Not all models are available in all areas.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...