Loading ...
Loading ...
Loading ...
16
Dry all parts with a cloth completely before reassembling or storing the humidifier.7.
Plug the humidifier into a working outlet and turn it on.
Add purified or distilled water to the water tank.
Humidifier does not power
on/off normally.
Little or no mist comes out. Clean the atomizer plate to avoid white dust from
accumulating on it.
Problem
Possible Solution
Fill up the water tank.
Choose a higher mist level.
There may be too much water in the base chamber.
Empty the base chamber, refill the water tank (not the
base chamber), and place the water tank properly onto
the base.
Troubleshooting
Cleaning the Aroma Pad & Absorption Pad
Pull out the aroma box and remove the aroma pad.
Remove the mist channel then remove the absorption pad from top of the heating element.
Rinse the pads under warm running water.
Dry the pads with a clean cloth and place pads back.
1.
2.
3.
4.
Replacing the Aroma Pad & Absorption Pad
If the aroma pad or absorption pad is stiff even after cleaning, then it needs to be replaced.
Extra pads are included with the humidifier.
To maintain the performance of your humidifier, only use official GoveeLife aroma pads and
absorption pads. For more information, contact Customer Support.
Storing
For Humidifier
Follow the cleaning instructions and dry all parts completely before storing the humidifier in a
cool, dry place.
The troubleshooting section below is for solving frequently asked questions for the humidifier
unit. If your problem persists, please contact customer support.
Caution
Align the edges of the absorption pad with that of the heating module. Gently press each side
of the pad to make sure it is well tucked into the concave.
Loading ...
Loading ...
Loading ...