Loading ...
Loading ...
Loading ...
EN - 8
4.3 Pausing and setting the
timer (Fig. B)
Pause
• You can pause each cooking cycle by
pressing and holding the button (11) for 2
seconds. The symbol "II” is shown on the
display when the hob is paused.
• To resume cooking with the last parameters
set and cancel the pause state, press and
hold the button (11).
The appliance can be paused for
10 minutes at most. After this time
the hob turns off.
Timer
You can set a timer to automatically stop the
cooking cycle in progress when the countdown
expires.
Before enabling the timer you need
to place the pot on the plate and
set the desired cooking power.
• Press the button (11) to start the timer. The
LED button ashes and the display displays
the time of duration "00".
• Use the buttons (6) and (8) to set the cooking
timer.
• After setting the desired cooking time, wait
2 seconds or press the button (11) again.
At this point the LED of the "TIMER" function
remains xed access and the countdown
appears on the display.
If, with timer set, the pot is not put
on the plate or is removed, the
"TIMER" function is maintained for
3 minutes. At this stage the LED of
the button (11) ashes. If the pot
is not placed on the plate, after 3
minutes the appliance turns off.
• At the end of the countdown the cooking
cycle stops, the display displays ashing
"00” and a short sequence of sounds is
emitted (20 seconds). After a further interval
of 10 seconds with the power level set to
0, the hob turns off.
When cooking with the timer set
it is always possible to vary the
power via the buttons (6) and (8),
or the slider (7).
You can always change the
countdown when cooking with the
timer set by pressing the button (11)
and then acting on the buttons (6)
and (8).
4.4 Button block function (Fig.
B)
• Pressing the buttons (10) and (11)
simultaneously allows you to lock/unlock
the keypad. The key icon " ” lights up when
the keypad is locked.
• The keypad can be locked/unlocked more
than once while using the hob, without
having to turn it on/off. The key lock
remains active even if the supply voltage
is interrupted and restored within a few
seconds, as it must be turned off manually.
• If the key lock is activated, you can always
turn off the unit by pressing the button (4).
Use
Loading ...
Loading ...
Loading ...