Hikvision DS-2TD1217T-3/PA User Manual

Loading ...

The detecon is applied to re-prevenon purposes in scenic region, forest, tunnel and so on. You

can congure the detecon parameters. When re source or smoke is detected, the alarm acons

will be triggered.

Note

Not all models support the funcon. Please take the actual product for reference.

7.2.1 Recommended Scene

This part introduces the recommended scenes of re source detecon and helps you select the

appropriate scene.

Fire source

detecon can be applied to indoor and outdoor monitoring with a large detecon

radius. To achieve the best monitoring eect, please set the installaon place as requirements

below.

●

The installaon place should be the highest posion within the detecon area. The lens should

not be covered during movement to detect the maximum area.

●

It is beer to choose the installaon place with convenient trac, well-equipped power and

internet facilies (e.g., communicaon tower, watchtower and high-rise roof).

7.2.2 Set Fire and Smoke

Detecon

To avoid the potenal re source and smoke damage simultaneously, you can congure the

funcon for certain areas. The detail conguraon steps show as below.

Before You Start

Go to Conguraon → System → Maintenance → VCA Resource Type , select Temperature

Measurement + Fire and Smoke Detecon.

Steps

Go to Conguraon → Event → Smart Event , select Fire and Smoke Detecon.

Check Enable Fire and Smoke

Detecon.

Select Fire and Smoke Detecon Mode.

Detecon

Mode Mode Descripon Conguraon Descripon

Fire or Smoke The system alarms when

device is triggered either by

Fire Source Detecon or

Smoke

Detecon.

Set Fire Source Detecon and

Smoke Detecon, see step 4.

Fire and Smoke The system alarms when

device is triggered both by Fire

Thermal Opcal Bi-spectrum Network Camera User Manual

Loading ...

Hikvision DS-2TD1217T-3/PA Thermographic Thermal & Optical Bi-spectrum Network Turret Camera