Hikvision DS-2TD1217T-3/PA User Manual

Loading ...

Steps

Go to picture overlay seng page: Conguraon → Image → Picture Overlay .

Select a channel to overlay picture.

Click Browse to select a picture, and click Upload.

The picture with a red rectangle will appear in live view aer successfully uploading.

Check Enable Picture Overlay.

Drag the picture to adjust its

posion.

Click Save.

5.7 Set Manual DPC (Defecve Pixel Correcon)

If the amount of defecve pixels in the image is comparavely small and accurate correcon is

needed, you can correct these pixels manually.

Steps

Go to

Conguraon → Image → DPC .

Select the thermal channel.

Select manual mode.

Click the

defecve pixel on the image, then a cursor shows on the live view.

Click Up, Down, Le, Right to adjust the cursor posion to the defecve pixel posion.

Click , then click to correct defecve pixel.

Note

●

If mulple defecve pixels need to be corrected, click aer locang a defecve pixel. Then

aer locang other pixels, click to correct them simultaneously.

●

This funcon is only supported by certain camera models.

Oponal: Click to cancel defecve pixel correcon.

5.8 Set Picture in Picture

You can overlay the images of two channels and view the image of two channels at the same me.

Steps

Select a channel number.

Select the picture in picture mode.

Overlap Mode

Paral image of thermal channel is displayed on the full screen of opcal

channel. This mode is only supported in Camera 01.

Details Overlay The device displays the details of opcal channel on thermal channel. This

mode is only supported in Camera 02.

Thermal Opcal Bi-spectrum Network Camera User Manual

Loading ...

Hikvision DS-2TD1217T-3/PA Thermographic Thermal & Optical Bi-spectrum Network Turret Camera