Hikvision DS-2TD1217T-3/PA User Manual

Loading ...

Set Expert Mode

Select the temperature measurement rules from Point, Line, or Area and congure parameters,

the device alarms if the alarm rules are met.

Steps

Go to

Conguraon → Temperature Measurement & Fire Prevenon → Basic Sengs , check

Enable Temperature Measurement.

Refer to

Set Thermography Parameters to set the parameters.

Go to Conguraon → Temperature Measurement & Fire Prevenon → Advanced Sengs ,

select Expert.

Select and enable the temperature measurement rules. Please refer to

Set Thermography Rule

for seng the rule.

Oponal: Click Area's Temperature Comparison to set the alarm rules and the temperature.

Click Save.

The maximum temperature and thermography rules will be displayed on the live view.

Note

Go to Image → VCA Rules Display to adjust the font size and the temperature color of normal,

alarm and pre-alarm.

Enable the scan funcon of device, such as linear scan to monitor the scene.

Set Thermography Rule

Steps

Customize the rule name.

Select the rule type to Point, Line, or Area. Then draw a point, line, or area on the interface

where the

posion to be measured.

Point

Please refer to Point Thermography for detailed conguraon.

Line Please refer to Line Thermography for detailed conguraon.

Area Please refer to Area Thermography for detailed conguraon.

Congure the temperature measurement parameters.

Emissivity

Set the emissivity of the target. The emissivity of the surface of a material is its eecveness

in eming energy as thermal radiaon. Dierent objects have dierent emissivity. Refer to

Common Material Emissivity Reference to search for the target emissivity.

Distance

The distance between the target and the device.

Reecve Temperature

Thermal Opcal Bi-spectrum Network Camera User Manual

Loading ...

Hikvision DS-2TD1217T-3/PA Thermographic Thermal & Optical Bi-spectrum Network Turret Camera