Loading ...
Loading ...
Loading ...
Barrier Gate User Manual
42
F-26. Set close speed:
When the LED displays "F-26", press the "Confirm" button to start setting, and then press "Open"
or "Close" button to adjust closing speed. The larger the value, the faster the speed, the smaller
the value, the slower the speed. After setting, press the "Confirm" button to save the data.
F-28. Set first angle to slow down during close:
When the LED displays "F-28", press the "Confirm" button to start setting, and then press "Open"
or "Close" button to adjust the first deceleration angle during close. The larger the value, the
larger the angle. The smaller the value, the smaller the angle. After setting, press the "Confirm"
button to save the data.
F-30. Set deceleration speed during close:
When the LED displays "F-30", press the "Confirm" button to start setting, and then press "Open"
or "Close" button to adjust the closing deceleration speed. The larger the value, the faster the
closing deceleration speed, the smaller the value, the slower the closing deceleration speed. After
setting, press the "Confirm" button to save the data.
00. Learning and deleting remote controller codes:
If you need to learn remote controller codes, first hold "Copy" button the LED will count from “1”
to “5”, release the “Copy” before the LED displays "5", the LED will back to display “1”, then press
any button of remote controller.
Back to menu interface after successful registration, and then hold "Copy" button for 5 seconds on
the main interface until the LED displays 0000, all the registered remote will be deleted.
Corresponding spring specification
Boom type
Boom length
Spring quantity & type
Octagonal Straight Boom
Pole
L≤3M
1*φ5.0
Octagonal Telescopic
Boom Pole
L≤4.5M
1*φ5.0
4.5M＜L≤6M
1*φ6.5
Folding Boom Pole
L≤4.5M
1*φ5.0
4.5M＜L≤6M
1*φ6.5
Boom Pole with Strip Light
L≤4M
1*φ5.0
Round boom pole
L≤4M
1*φ5.0
L≤6M
1*φ6.5
Loading ...
Loading ...
Loading ...