Loading ...
Loading ...
Loading ...
Barrier Gate User Manual
10
Note
The suggestions for positions of holes:
● The holes in vertical direction should be near to the switch.
● If the entrance/exit is unidirectional, the holes should be in the horizontal center of the
refuge island. If the entrance/exit is bi-directional, the holes in the horizontal direction should
be far away from the entrance/exit.
2. Punch the four M12 × 100 expansion screws in the package into the marked positions on the
refuge island, and fasten the nuts to make the screws expand to grip the ground. Then
unfasten the nuts.
Figure 2-2 Install Expansion Screws
3. Turn the key clockwise to open the front cover.
Figure 2-3 Open Front Cover
4. Fix the host.
1) Put the layers on the host bottom and keep them perpendicular to the barrier gate’s switch.
2) Put the host on the positions of expansion screws on the refuge island to make the screws
pass through the layers. Keep the layers perpendicular to the barrier gate’s switch.
3) Fasten the expansion nuts on the screws to fix the host.
Loading ...
Loading ...
Loading ...