Loading ...
Loading ...
Loading ...
Barrier Gate User Manual
40
F-01. Select the direction of the barrier:
Firstly, ensure motor wire is correct, then long press “Function/Confirm” button for 3 seconds, the
LED will display F00. Press the “Open” button, when the LED displays F-01, press the
“Confirm/Stop /Copy/Delete” button, the LED displays the device direction, " 0-- "represents the
right direction, "--0 " represents the left direction, choose the direction according to the actual
situation. After selection, press the “Confirm/Stop/Copy/Delete” button, then hold
“Function/Confirm” button for 3 seconds to save the data. (After this option, you need to restart
the device to take effect the settings.).
F-04. Manual learning Open & Close position:
When the LED displays F-04, press the "Confirm" button, then press the "Close" button to change
the value to 02, press the "Confirm" button again, the controller will restart, and then press
"Open", LED will display 01, and the barrier will stop after hitting the Open position. Hold "Close"
until the boom is vertical, then hold the "Confirm" for 2 seconds and release it, the LED will display
02, start to manually find the Close position, hold "Close" until the boom reaches the Close
position, hold the "Confirm" for 2 seconds and release it, wait for the LED displays 00 to indicate
the completion of learning. (If there are eaves, etc., you can choose 03 for F04, and manually learn
the close position first, and then the open position)
F-09. Set Open angle:
When the LED displays F-09, press "Confirm" to adjust the opening angle, and then press "Open"
or "Close" to adjust the opening angle. The larger the value, the larger the opening angle. The
smaller the value, the smaller the opening angle. Press "Confirm" to save the data after
adjustment.
F-10. Set close angle:
When the LED displays F-10, press "Confirm" to adjust the angle of closing, and then press "Open"
or "Close" to adjust the angle of closing. The value of 30 represents the level of the boom. If it is
larger than 30, the boom will deviate in the direction of opening. If the value is less than 30, the
boom will deviate in the direction of closing. The larger the value, the larger the angle of deviation
of the boom in the direction of opening. The smaller the value, the smaller the angle of deviation
of the boom in the direction of opening. Press the "Confirm" to save the data.
F-13. Set bounce back strength:
When the LED displays F-13, press "Confirm" to adjust the strength of rebounding when
encountering resistance, and then press "Open" or "Close". The larger the value, the larger the
strength of rebound when encountering resistance. The smaller the value, the smaller the strength
of the rebound when encountering resistance. After adjustment, press "Confirm" to save the data.
(Adjusting this parameter may cause misjudgment by the controller, it is not recommended to
change the value of this parameter unless necessary)
F-14. Set bounce back time:
Loading ...
Loading ...
Loading ...