Loading ...
Loading ...
Loading ...
81
4.7 Maintenance
4.7.1 System Maintenance
The software can be upgraded by the following steps:
Step1: Browse and select the upgrading file;
Step2: Click the “upgrade” button after it prompts upload file successfully. After the system reboots
successfully, the update is done.
Note: Do not disconnect the power of the device during the update. The device will be restarted to complete the
upgrading.
Figure 4-7-1 System Maintenance
Table 4-7-1 Description of the buttons
Parameters Function Introduction
System Upgrade
Hardware Version: The hardware version of the camera
Software Version: The software version of the camera
Kernel Version: The kernel version
Firmware File: Select the firmware used to upgrade
Maintenance
Reboot the device: Click “Reboot” button to restart the device immediately
Reset settings: Click “Reset” button to reset the camera to factory default settings
Keep the IP Configuration: Select this option to keep the IP configuration when
resetting the camera
Export Config File:Click this button to export the configuration file
Import Config File: Click this button to import the old configuration file
Loading ...
Loading ...